From patchwork Thu Aug 8 21:41:26 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Arnd Bergmann X-Patchwork-Id: 170858 Delivered-To: patch@linaro.org Received: by 2002:a92:512:0:0:0:0:0 with SMTP id q18csp9131111ile; Thu, 8 Aug 2019 14:43:45 -0700 (PDT) X-Google-Smtp-Source: APXvYqwLVXPfkg/+spfl0luWlGg7ccnEagPpA6XJShtlEOU0cADP8iz8tyUis0wce+G21Rlis6Os X-Received: by 2002:aa7:8202:: with SMTP id k2mr18085234pfi.31.1565300625620; Thu, 08 Aug 2019 14:43:45 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1565300625; cv=none; d=google.com; s=arc-20160816; b=oI66Z8R5QFt18/HZaqyrd6s6Fx5ZikLr7BSmxg64UP7dDub9fTXswLkZEhrfseIJoL HEI4pJ39WcQOl6Kc3aaQMdjY5e8nT3gF96oFdNf00QqthNu9poPab3RuFt9eB9Ud1jn1 a8bTce5isnZiUDLTWlKZ05N3ylgd2gy4XMVSjH9a1jsRFMUIA6O9sMCmP6gutCSHz4DM yh9+F7zPOzWbv8xbCl9PvD10P0x3t7VC9L/nkCJ//dJb8tE+k4vHMrYq8uuD6GNxKXud RhzIh3ICvv+rp4qse6HuHl13rNjxN009tE8lahFoJZrJsvRGqu4yu1oVFCsIBrE//YUm aiTw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from; bh=Ls4TDnNgTL9n8MQaaHDnjRvqxwxTPO+1z3lYCbBLcAA=; b=Wx9Pmf10xwV8eB3I1skTf1pqRLsdJ+wpWSmjzPMBuesxJg9PzZPr3ULzb0OQUKp5jr NnmRuocsP/X3jPzqe4qTIdo/0JiuW8EW+HCK9mDmNxe3MTYr3KoaUjxLIjtzPsS1Vkk5 2gdma6U1wnqnKz1lVLQhpKAeIONl4PfgVcaEbP/44DzbuFLPqU10sfYSfTpyVUpeNqVv ZniS11aW6TMxZJ7BpVhYy3VSiCxG4/+buuwhcaTHsrMqtYQqtn7mXidzN0bj8nYgr4+o 7y2TeWb8DHixb7GsuwAR9HJv1wrqRGPw4eeSjWhX6/NB7p9Vfv9tjxTFDiUfFfhCL+EN x4cg== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-omap-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-omap-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id t134si54042129pgc.361.2019.08.08.14.43.44; Thu, 08 Aug 2019 14:43:45 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-omap-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-omap-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-omap-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1733140AbfHHVno (ORCPT + 5 others); Thu, 8 Aug 2019 17:43:44 -0400 Received: from mout.kundenserver.de ([212.227.17.10]:56213 "EHLO mout.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1733295AbfHHVno (ORCPT ); Thu, 8 Aug 2019 17:43:44 -0400 Received: from threadripper.lan ([149.172.19.189]) by mrelayeu.kundenserver.de (mreue107 [212.227.15.145]) with ESMTPA (Nemesis) id 1MGhi0-1i9bYi2gEs-00DsZM; Thu, 08 Aug 2019 23:43:02 +0200 From: Arnd Bergmann To: Tony Lindgren , Aaro Koskinen , Paul Walmsley , Kevin Hilman Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Greg Kroah-Hartman , Linus Walleij , Bartlomiej Zolnierkiewicz , Tomi Valkeinen , Arnd Bergmann , linux-kernel@vger.kernel.org Subject: [PATCH 16/22] ARM: omap1: move clk support into a single file Date: Thu, 8 Aug 2019 23:41:26 +0200 Message-Id: <20190808214232.2798396-2-arnd@arndb.de> X-Mailer: git-send-email 2.20.0 In-Reply-To: <20190808214232.2798396-1-arnd@arndb.de> References: <20190808212234.2213262-1-arnd@arndb.de> <20190808214232.2798396-1-arnd@arndb.de> MIME-Version: 1.0 X-Provags-ID: V03:K1:esNHGviDobkgGOdcVSEFZe01urPRNHC2Mha6XfJrImPmyRZiCEw mK2n3I7x/p+OzgjiP0Af9UVZZ5DXvUshrOr6cYQLFPojbw+ag93wpDeaYJt7lRhusiha1xZ qbuk/oPK+c63S2jJviggkye41tC8EMRnHHGllWudUrGf1PWLlDGfv/LDDuRgkPd4U+3QngF 1ugdtKkLzOSaVSB/N3+FA== X-Spam-Flag: NO X-UI-Out-Filterresults: notjunk:1; V03:K0:QS6dRrmqwwA=:OoEPpbFvGeVrTJDY9LOFik EdEHX2VbeyFLWml4uqhbRMAHL7EjBFbTBwJ7OXOtCBKfMUN3YxmEly0sE4WK2lAVwJ73y1RV2 nO9q/TJUISuw145gCsgN5v41K1eKQntWcXB3b9ohWbPM7/v34IC/vuVwE9DgtJl/EToqrfpSx m25djJBPva9EtkiGma4KOt5Pw33ptAu0bujUip4iMUQpbWylyKtezJBLUvCAg15q6kRKPNmlj fw0V9ni5lHppxSqcGs08nFkztlfIJWm6ktcNX4GjECYcKYX0naCQLzyq4xUvkMBdnzH5Yrk4P t/AG2SveaD1gfkauB+W+QwzhESLqkpksmJt7u/nlsEPNBrID2B0En6vpIubybqtyggVIHecRr 3hyC7Rdy3nzhQkNeVHlu5eM+SXbZxMXi07dYYv08seDIowCRJy3fKemd8skB0Zgot4TfI+92b 0IXplxrW/5+4L8lwm0PiedObNWTnrceGTF2V5HYgcDC8MCYqLLN6Kw3SAZ8KegPbiXQDwYDDJ /gYw8xDdgk8Y4dcaUeQsDnIM/QwfPRo0zE+9R5bb9an4jCqJs4thF1971GCncDFiw2KlC1Apa +J+rLUKJW2jsCmC16af8WL4ALqKzB2B4iKMl+pN58i7XMCKPRckVSSRsU+HfK43FqV8J3IDvq m7fgD3FGf1HaZa/lfqrIb9OLrpCbOiS831FsSDwwlrYMPEd3DTcXB316z1tHn3s+MAHO98/AI mMQrTXtBzfC0HI+Hgwyj7JEbowIMJAJISNsLdg== Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org The omap1 clock support is traditionally split into the clock.c, clock_data.c and opp_data.c files. As a preparation for cleaning this up, move everything into one file. No functional change, each added line comes from an existing file. Signed-off-by: Arnd Bergmann --- arch/arm/mach-omap1/Makefile | 2 +- arch/arm/mach-omap1/board-nokia770.c | 1 - arch/arm/mach-omap1/clock.c | 1215 +++++++++++++++++++++++++- arch/arm/mach-omap1/clock.h | 288 ------ arch/arm/mach-omap1/clock_data.c | 920 ------------------- arch/arm/mach-omap1/common.h | 2 + arch/arm/mach-omap1/devices.c | 1 - arch/arm/mach-omap1/io.c | 1 - arch/arm/mach-omap1/opp.h | 26 - arch/arm/mach-omap1/opp_data.c | 51 -- arch/arm/mach-omap1/pm.c | 1 - 11 files changed, 1216 insertions(+), 1292 deletions(-) delete mode 100644 arch/arm/mach-omap1/clock.h delete mode 100644 arch/arm/mach-omap1/clock_data.c delete mode 100644 arch/arm/mach-omap1/opp.h delete mode 100644 arch/arm/mach-omap1/opp_data.c -- 2.20.0 diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 450bbf552b57..1337d7a2754c 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -6,7 +6,7 @@ # Common support obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ serial.o devices.o dma.o fb.o -obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o +obj-y += clock.o reset.o pm_bus.o timer.o ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),) obj-y += mcbsp.o diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 8e0e58495023..4f7e2fe58d63 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -32,7 +32,6 @@ #include "hardware.h" #include "usb.h" #include "common.h" -#include "clock.h" #include "mmc.h" #define ADS7846_PENDOWN_GPIO 15 diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 24db9b723a6f..bc51d5e24a9e 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include #include @@ -23,9 +25,318 @@ #include "hardware.h" #include "soc.h" #include "iomap.h" -#include "clock.h" -#include "opp.h" #include "sram.h" +#include "usb.h" + +struct module; +struct clk; + +struct omap_clk { + u16 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +/* Platform flags for the clkdev-OMAP integration code */ +#define CK_310 (1 << 0) +#define CK_7XX (1 << 1) /* 7xx, 850 */ +#define CK_1510 (1 << 2) +#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ +#define CK_1710 (1 << 4) /* 1710 extra for rate selection */ + + +/* Temporary, needed during the common clock framework conversion */ +#define __clk_get_name(clk) (clk->name) +#define __clk_get_parent(clk) (clk->parent) +#define __clk_get_rate(clk) (clk->rate) + +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * @allow_idle: fn ptr that enables autoidle for the current clock in hardware + * @deny_idle: fn ptr that disables autoidle for the current clock in hardware + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, + u8 *, u8 *); + void (*find_companion)(struct clk *, void __iomem **, + u8 *); + void (*allow_idle)(struct clk *); + void (*deny_idle)(struct clk *); +}; + +/* + * struct clk.flags possibilities + * + * XXX document the rest of the clock flags here + * + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ +struct clk { + struct list_head node; + const struct clkops *ops; + const char *name; + struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ + unsigned long rate; + void __iomem *enable_reg; + unsigned long (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + u8 enable_bit; + s8 usecount; + u8 fixed_div; + u8 flags; + u8 rate_offset; + u8 src_offset; +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif +}; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); +}; + +extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_preinit(struct clk *clk); +extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); +extern unsigned long followparent_recalc(struct clk *clk); +extern void clk_enable_init_clocks(void); +unsigned long omap_fixed_divisor_recalc(struct clk *clk); +extern struct clk *omap_clk_get_by_name(const char *name); +extern int omap_clk_enable_autoidle_all(void); +extern int omap_clk_disable_autoidle_all(void); + +extern const struct clkops clkops_null; + +extern struct clk dummy_ck; + +extern int omap1_clk_enable(struct clk *clk); +extern void omap1_clk_disable(struct clk *clk); +extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); +extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_ckctl_recalc(struct clk *clk); +extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_sossi_recalc(struct clk *clk); +extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); +extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate); +extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_uart_recalc(struct clk *clk); +extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate); +extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate); +extern void omap1_init_ext_clk(struct clk *clk); +extern int omap1_select_table_rate(struct clk *clk, unsigned long rate); +extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate); +extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); +extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); +extern unsigned long omap1_watchdog_recalc(struct clk *clk); + +#ifdef CONFIG_OMAP_RESET_CLOCKS +extern void omap1_clk_disable_unused(struct clk *clk); +#else +#define omap1_clk_disable_unused NULL +#endif + +struct uart_clk { + struct clk clk; + unsigned long sysc_addr; +}; + +/* Provide a method for preventing idling some ARM IDLECT clocks */ +struct arm_idlect1_clk { + struct clk clk; + unsigned long no_idle_count; + __u8 idlect_shift; +}; + +/* ARM_CKCTL bit shifts */ +#define CKCTL_PERDIV_OFFSET 0 +#define CKCTL_LCDDIV_OFFSET 2 +#define CKCTL_ARMDIV_OFFSET 4 +#define CKCTL_DSPDIV_OFFSET 6 +#define CKCTL_TCDIV_OFFSET 8 +#define CKCTL_DSPMMUDIV_OFFSET 10 +/*#define ARM_TIMXO 12*/ +#define EN_DSPCK 13 +/*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */ +/* DSP_CKCTL bit shifts */ +#define CKCTL_DSPPERDIV_OFFSET 0 + +/* ARM_IDLECT2 bit shifts */ +#define EN_WDTCK 0 +#define EN_XORPCK 1 +#define EN_PERCK 2 +#define EN_LCDCK 3 +#define EN_LBCK 4 /* Not on 1610/1710 */ +/*#define EN_HSABCK 5*/ +#define EN_APICK 6 +#define EN_TIMCK 7 +#define DMACK_REQ 8 +#define EN_GPIOCK 9 /* Not on 1610/1710 */ +/*#define EN_LBFREECK 10*/ +#define EN_CKOUT_ARM 11 + +/* ARM_IDLECT3 bit shifts */ +#define EN_OCPI_CK 0 +#define EN_TC1_CK 2 +#define EN_TC2_CK 4 + +/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */ +#define EN_DSPTIMCK 5 + +/* Various register defines for clock controls scattered around OMAP chip */ +#define SDW_MCLK_INV_BIT 2 /* In ULPD_CLKC_CTRL */ +#define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ +#define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ +#define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */ +#define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */ +#define SWD_CLK_DIV_CTRL_SEL 0xfffe0874 +#define COM_CLK_DIV_CTRL_SEL 0xfffe0878 +#define SOFT_REQ_REG 0xfffe0834 +#define SOFT_REQ_REG2 0xfffe0880 + +extern __u32 arm_idlect1_mask; +extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; + +extern const struct clkops clkops_dspck; +extern const struct clkops clkops_dummy; +extern const struct clkops clkops_uart_16xx; +extern const struct clkops clkops_generic; + +/* used for passing SoC type to omap1_{select,round_to}_table_rate() */ +extern u32 cpu_mask; + + +/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ +#define IDL_CLKOUT_ARM_SHIFT 12 +#define IDLTIM_ARM_SHIFT 9 +#define IDLAPI_ARM_SHIFT 8 +#define IDLIF_ARM_SHIFT 6 +#define IDLLB_ARM_SHIFT 4 /* undocumented? */ +#define OMAP1510_IDLLCD_ARM_SHIFT 3 /* undocumented? */ +#define IDLPER_ARM_SHIFT 2 +#define IDLXORP_ARM_SHIFT 1 +#define IDLWDT_ARM_SHIFT 0 + +/* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */ +#define CONF_MOD_UART3_CLK_MODE_R 31 +#define CONF_MOD_UART2_CLK_MODE_R 30 +#define CONF_MOD_UART1_CLK_MODE_R 29 +#define CONF_MOD_MMC_SD_CLK_REQ_R 23 +#define CONF_MOD_MCBSP3_AUXON 20 + +/* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */ +#define CONF_MOD_SOSSI_CLK_EN_R 16 + +/* Some OTG_SYSCON_2-specific bit fields */ +#define OTG_SYSCON_2_UHOST_EN_SHIFT 8 + +/* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */ +#define SOFT_MMC2_DPLL_REQ_SHIFT 13 +#define SOFT_MMC_DPLL_REQ_SHIFT 12 +#define SOFT_UART3_DPLL_REQ_SHIFT 11 +#define SOFT_UART2_DPLL_REQ_SHIFT 10 +#define SOFT_UART1_DPLL_REQ_SHIFT 9 +#define SOFT_USB_OTG_DPLL_REQ_SHIFT 8 +#define SOFT_CAM_DPLL_REQ_SHIFT 7 +#define SOFT_COM_MCKO_REQ_SHIFT 6 +#define SOFT_PERIPH_REQ_SHIFT 5 /* sys_ck gate for UART2 ? */ +#define USB_REQ_EN_SHIFT 4 +#define SOFT_USB_REQ_SHIFT 3 /* sys_ck gate for USB host? */ +#define SOFT_SDW_REQ_SHIFT 2 /* sys_ck gate for Bluetooth? */ +#define SOFT_COM_REQ_SHIFT 1 /* sys_ck gate for com proc? */ +#define SOFT_DPLL_REQ_SHIFT 0 + __u32 arm_idlect1_mask; struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; @@ -187,6 +498,54 @@ unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) return clk->parent->rate / dsor; } +/*------------------------------------------------------------------------- + * Omap1 MPU rate table + *-------------------------------------------------------------------------*/ +struct mpu_rate { + unsigned long rate; + unsigned long xtal; + unsigned long pll_rate; + __u16 ckctl_val; + __u16 dpllctl_val; + u32 flags; +}; + +struct mpu_rate omap1_rate_table[] = { + /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL + * NOTE: Comment order here is different from bits in CKCTL value: + * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv + */ + { 216000000, 12000000, 216000000, 0x050d, 0x2910, /* 1/1/2/2/2/8 */ + CK_1710 }, + { 195000000, 13000000, 195000000, 0x050e, 0x2790, /* 1/1/2/2/4/8 */ + CK_7XX }, + { 192000000, 19200000, 192000000, 0x050f, 0x2510, /* 1/1/2/2/8/8 */ + CK_16XX }, + { 192000000, 12000000, 192000000, 0x050f, 0x2810, /* 1/1/2/2/8/8 */ + CK_16XX }, + { 96000000, 12000000, 192000000, 0x055f, 0x2810, /* 2/2/2/2/8/8 */ + CK_16XX }, + { 48000000, 12000000, 192000000, 0x0baf, 0x2810, /* 4/4/4/8/8/8 */ + CK_16XX }, + { 24000000, 12000000, 192000000, 0x0fff, 0x2810, /* 8/8/8/8/8/8 */ + CK_16XX }, + { 182000000, 13000000, 182000000, 0x050e, 0x2710, /* 1/1/2/2/4/8 */ + CK_7XX }, + { 168000000, 12000000, 168000000, 0x010f, 0x2710, /* 1/1/1/2/8/8 */ + CK_16XX|CK_7XX }, + { 150000000, 12000000, 150000000, 0x010a, 0x2cb0, /* 1/1/1/2/4/4 */ + CK_1510 }, + { 120000000, 12000000, 120000000, 0x010a, 0x2510, /* 1/1/1/2/4/4 */ + CK_16XX|CK_1510|CK_310|CK_7XX }, + { 96000000, 12000000, 96000000, 0x0005, 0x2410, /* 1/1/1/1/2/2 */ + CK_16XX|CK_1510|CK_310|CK_7XX }, + { 60000000, 12000000, 60000000, 0x0005, 0x2290, /* 1/1/1/1/2/2 */ + CK_16XX|CK_1510|CK_310|CK_7XX }, + { 30000000, 12000000, 60000000, 0x0555, 0x2290, /* 2/2/2/2/2/2 */ + CK_16XX|CK_1510|CK_310|CK_7XX }, + { 0, 0, 0, 0, 0 }, +}; + /* MPU virtual clock functions */ int omap1_select_table_rate(struct clk *clk, unsigned long rate) { @@ -1029,3 +1388,855 @@ static int __init clk_debugfs_init(void) late_initcall(clk_debugfs_init); #endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ + +/* + * Omap1 clocks + */ + +static struct clk ck_ref = { + .name = "ck_ref", + .ops = &clkops_null, + .rate = 12000000, +}; + +static struct clk ck_dpll1 = { + .name = "ck_dpll1", + .ops = &clkops_null, + .parent = &ck_ref, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ FIX: SoSSI, SSR ] + */ +static struct arm_idlect1_clk ck_dpll1out = { + .clk = { + .name = "ck_dpll1out", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT | + ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_CKOUT_ARM, + .recalc = &followparent_recalc, + }, + .idlect_shift = IDL_CLKOUT_ARM_SHIFT, +}; + +static struct clk sossi_ck = { + .name = "ck_sossi", + .ops = &clkops_generic, + .parent = &ck_dpll1out.clk, + .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), + .enable_bit = CONF_MOD_SOSSI_CLK_EN_R, + .recalc = &omap1_sossi_recalc, + .set_rate = &omap1_set_sossi_rate, +}; + +static struct clk arm_ck = { + .name = "arm_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .rate_offset = CKCTL_ARMDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct arm_idlect1_clk armper_ck = { + .clk = { + .name = "armper_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = IDLPER_ARM_SHIFT, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ GPIO code for 1510 ] + */ +static struct clk arm_gpio_ck = { + .name = "ick", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_GPIOCK, + .recalc = &followparent_recalc, +}; + +static struct arm_idlect1_clk armxor_ck = { + .clk = { + .name = "armxor_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = IDLXORP_ARM_SHIFT, +}; + +static struct arm_idlect1_clk armtim_ck = { + .clk = { + .name = "armtim_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_TIMCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = IDLTIM_ARM_SHIFT, +}; + +static struct arm_idlect1_clk armwdt_ck = { + .clk = { + .name = "armwdt_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_WDTCK, + .fixed_div = 14, + .recalc = &omap_fixed_divisor_recalc, + }, + .idlect_shift = IDLWDT_ARM_SHIFT, +}; + +static struct clk arminth_ck16xx = { + .name = "arminth_ck", + .ops = &clkops_null, + .parent = &arm_ck, + .recalc = &followparent_recalc, + /* Note: On 16xx the frequency can be divided by 2 by programming + * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 + * + * 1510 version is in TC clocks. + */ +}; + +static struct clk dsp_ck = { + .name = "dsp_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), + .enable_bit = EN_DSPCK, + .rate_offset = CKCTL_DSPDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct clk dspmmu_ck = { + .name = "dspmmu_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .rate_offset = CKCTL_DSPMMUDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct clk dspper_ck = { + .name = "dspper_ck", + .ops = &clkops_dspck, + .parent = &ck_dpll1, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc_dsp_domain, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = &omap1_clk_set_rate_dsp_domain, +}; + +static struct clk dspxor_ck = { + .name = "dspxor_ck", + .ops = &clkops_dspck, + .parent = &ck_ref, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, +}; + +static struct clk dsptim_ck = { + .name = "dsptim_ck", + .ops = &clkops_dspck, + .parent = &ck_ref, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_DSPTIMCK, + .recalc = &followparent_recalc, +}; + +static struct arm_idlect1_clk tc_ck = { + .clk = { + .name = "tc_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .rate_offset = CKCTL_TCDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = IDLIF_ARM_SHIFT, +}; + +static struct clk arminth_ck1510 = { + .name = "arminth_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, + /* Note: On 1510 the frequency follows TC_CK + * + * 16xx version is in MPU clocks. + */ +}; + +static struct clk tipb_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "tipb_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk l3_ocpi_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "l3_ocpi_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_OCPI_CK, + .recalc = &followparent_recalc, +}; + +static struct clk tc1_ck = { + .name = "tc1_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_TC1_CK, + .recalc = &followparent_recalc, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ pm.c (SRAM), CCP, Camera ] + */ +static struct clk tc2_ck = { + .name = "tc2_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_TC2_CK, + .recalc = &followparent_recalc, +}; + +static struct clk dma_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "dma_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk dma_lcdfree_ck = { + .name = "dma_lcdfree_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct arm_idlect1_clk api_ck = { + .clk = { + .name = "api_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_APICK, + .recalc = &followparent_recalc, + }, + .idlect_shift = IDLAPI_ARM_SHIFT, +}; + +static struct arm_idlect1_clk lb_ck = { + .clk = { + .name = "lb_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LBCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = IDLLB_ARM_SHIFT, +}; + +static struct clk rhea1_ck = { + .name = "rhea1_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk rhea2_ck = { + .name = "rhea2_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk lcd_ck_16xx = { + .name = "lcd_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct arm_idlect1_clk lcd_ck_1510 = { + .clk = { + .name = "lcd_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = OMAP1510_IDLLCD_ARM_SHIFT, +}; + +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX does this need SYSC register handling? + */ +static struct clk uart1_1510 = { + .name = "uart1_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = CONF_MOD_UART1_CLK_MODE_R, + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX SYSC register handling does not belong in the clock framework + */ +static struct uart_clk uart1_16xx = { + .clk = { + .name = "uart1_ck", + .ops = &clkops_uart_16xx, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = CONF_MOD_UART1_CLK_MODE_R, + }, + .sysc_addr = 0xfffb0054, +}; + +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX does this need SYSC register handling? + */ +static struct clk uart2_ck = { + .name = "uart2_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = CONF_MOD_UART2_CLK_MODE_R, + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX does this need SYSC register handling? + */ +static struct clk uart3_1510 = { + .name = "uart3_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = CONF_MOD_UART3_CLK_MODE_R, + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX SYSC register handling does not belong in the clock framework + */ +static struct uart_clk uart3_16xx = { + .clk = { + .name = "uart3_ck", + .ops = &clkops_uart_16xx, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = CONF_MOD_UART3_CLK_MODE_R, + }, + .sysc_addr = 0xfffb9854, +}; + +static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ + .name = "usb_clko", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 6000000, + .flags = ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), + .enable_bit = USB_MCLK_EN_BIT, +}; + +static struct clk usb_hhc_ck1510 = { + .name = "usb_hhc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ + .flags = ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = USB_HOST_HHC_UHOST_EN, +}; + +static struct clk usb_hhc_ck16xx = { + .name = "usb_hhc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ + .flags = ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ + .enable_bit = OTG_SYSCON_2_UHOST_EN_SHIFT +}; + +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT, +}; + +static struct clk uart1_7xx = { + .name = "uart1_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 12000000, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 9, +}; + +static struct clk uart2_7xx = { + .name = "uart2_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 12000000, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 11, +}; + +static struct clk mclk_1510 = { + .name = "mclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = SOFT_COM_MCKO_REQ_SHIFT, +}; + +static struct clk mclk_16xx = { + .name = "mclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), + .enable_bit = COM_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, +}; + +static struct clk bclk_1510 = { + .name = "bclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, +}; + +static struct clk bclk_16xx = { + .name = "bclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), + .enable_bit = SWD_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, +}; + +static struct clk mmc1_ck = { + .name = "mmc1_ck", + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = CONF_MOD_MMC_SD_CLK_REQ_R, +}; + +/* + * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as + * CONF_MOD_MCBSP3_AUXON ?? + */ +static struct clk mmc2_ck = { + .name = "mmc2_ck", + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 20, +}; + +static struct clk mmc3_ck = { + .name = "mmc3_ck", + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = SOFT_MMC_DPLL_REQ_SHIFT, +}; + +static struct clk virtual_ck_mpu = { + .name = "mpu", + .ops = &clkops_null, + .parent = &arm_ck, /* Is smarter alias for */ + .recalc = &followparent_recalc, + .set_rate = &omap1_select_table_rate, + .round_rate = &omap1_round_to_table_rate, +}; + +/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK +remains active during MPU idle whenever this is enabled */ +static struct clk i2c_fck = { + .name = "i2c_fck", + .ops = &clkops_null, + .flags = CLOCK_NO_IDLE_PARENT, + .parent = &armxor_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c_ick = { + .name = "i2c_ick", + .ops = &clkops_null, + .flags = CLOCK_NO_IDLE_PARENT, + .parent = &armper_ck.clk, + .recalc = &followparent_recalc, +}; + +/* + * clkdev integration + */ + +static struct omap_clk omap_clks[] = { + /* non-ULPD clocks */ + CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310 | CK_7XX), + /* CK_GEN1 clocks */ + CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), + CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), + CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_gpio.0", "ick", &arm_gpio_ck, CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), + CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), + /* CK_GEN2 clocks */ + CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), + /* CK_GEN3 clocks */ + CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), + CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), + CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), + CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), + CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), + CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), + CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), + CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), + CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), + CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), + /* ULPD clocks */ + CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), + CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), + CLK(NULL, "uart1_ck", &uart1_7xx, CK_7XX), + CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "uart2_ck", &uart2_7xx, CK_7XX), + CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), + CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX), + CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), + CLK(NULL, "mclk", &mclk_16xx, CK_16XX), + CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), + CLK(NULL, "bclk", &bclk_16xx, CK_16XX), + CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), + CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), + CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), + /* Virtual clocks */ + CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), + CLK("omap_i2c.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("omap_i2c.1", "ick", &i2c_ick, CK_16XX), + CLK("omap_i2c.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), + CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX), + CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), + CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), +}; + +/* + * init + */ + +static void __init omap1_show_rates(void) +{ + pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); +} + +u32 cpu_mask; + +int __init omap1_clk_init(void) +{ + struct omap_clk *c; + int crystal_type = 0; /* Default 12 MHz */ + u32 reg; + +#ifdef CONFIG_DEBUG_LL + /* + * Resets some clocks that may be left on from bootloader, + * but leaves serial clocks on. + */ + omap_writel(0x3 << 29, MOD_CONF_CTRL_0); +#endif + + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + reg = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(reg, SOFT_REQ_REG); + if (!cpu_is_omap15xx()) + omap_writew(0, SOFT_REQ_REG2); + + /* By default all idlect1 clocks are allowed to idle */ + arm_idlect1_mask = ~0; + + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + clk_preinit(c->lk.clk); + + cpu_mask = 0; + if (cpu_is_omap1710()) + cpu_mask |= CK_1710; + if (cpu_is_omap16xx()) + cpu_mask |= CK_16XX; + if (cpu_is_omap1510()) + cpu_mask |= CK_1510; + if (cpu_is_omap7xx()) + cpu_mask |= CK_7XX; + if (cpu_is_omap310()) + cpu_mask |= CK_310; + + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + if (c->cpu & cpu_mask) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + } + + /* Pointers to these clocks are needed by code in clock.c */ + api_ck_p = clk_get(NULL, "api_ck"); + ck_dpll1_p = clk_get(NULL, "ck_dpll1"); + ck_ref_p = clk_get(NULL, "ck_ref"); + + if (cpu_is_omap7xx()) + ck_ref.rate = 13000000; + if (cpu_is_omap16xx() && crystal_type == 2) + ck_ref.rate = 19200000; + + pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", + omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), + omap_readw(ARM_CKCTL)); + + /* We want to be in syncronous scalable mode */ + omap_writew(0x1000, ARM_SYSST); + + + /* + * Initially use the values set by bootloader. Determine PLL rate and + * recalculate dependent clocks as if kernel had changed PLL or + * divisors. See also omap1_clk_late_init() that can reprogram dpll1 + * after the SRAM is initialized. + */ + { + unsigned pll_ctl_val = omap_readw(DPLL_CTL); + + ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ + if (pll_ctl_val & 0x10) { + /* PLL enabled, apply multiplier and divisor */ + if (pll_ctl_val & 0xf80) + ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; + ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; + } else { + /* PLL disabled, apply bypass divisor */ + switch (pll_ctl_val & 0xc) { + case 0: + break; + case 0x4: + ck_dpll1.rate /= 2; + break; + default: + ck_dpll1.rate /= 4; + break; + } + } + } + propagate_rate(&ck_dpll1); + /* Cache rates for clocks connected to ck_ref (not dpll1) */ + propagate_rate(&ck_ref); + omap1_show_rates(); + if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { + /* Select slicer output as OMAP input clock */ + omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, + OMAP7XX_PCC_UPLD_CTRL); + } + + /* Amstrad Delta wants BCLK high when inactive */ + if (machine_is_ams_delta()) + omap_writel(omap_readl(ULPD_CLOCK_CTRL) | + (1 << SDW_MCLK_INV_BIT), + ULPD_CLOCK_CTRL); + + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ + /* (on 730, bit 13 must not be cleared) */ + if (cpu_is_omap7xx()) + omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); + else + omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); + + /* Put DSP/MPUI into reset until needed */ + omap_writew(0, ARM_RSTCT1); + omap_writew(1, ARM_RSTCT2); + omap_writew(0x400, ARM_IDLECT1); + + /* + * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) + * of the ARM_IDLECT2 register must be set to zero. The power-on + * default value of this bit is one. + */ + omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable(&armper_ck.clk); + clk_enable(&armxor_ck.clk); + clk_enable(&armtim_ck.clk); /* This should be done by timer code */ + + if (cpu_is_omap15xx()) + clk_enable(&arm_gpio_ck); + + return 0; +} + +#define OMAP1_DPLL1_SANE_VALUE 60000000 + +void __init omap1_clk_late_init(void) +{ + unsigned long rate = ck_dpll1.rate; + + /* Find the highest supported frequency and enable it */ + if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + pr_err("System frequencies not set, using default. Check your config.\n"); + /* + * Reprogramming the DPLL is tricky, it must be done from SRAM. + */ + omap_sram_reprogram_clock(0x2290, 0x0005); + ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; + } + propagate_rate(&ck_dpll1); + omap1_show_rates(); + loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate); +} diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h deleted file mode 100644 index f3b8811f5ac0..000000000000 --- a/arch/arm/mach-omap1/clock.h +++ /dev/null @@ -1,288 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/arm/mach-omap1/clock.h - * - * Copyright (C) 2004 - 2005, 2009 Nokia corporation - * Written by Tuukka Tikkanen - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - */ - -#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H -#define __ARCH_ARM_MACH_OMAP1_CLOCK_H - -#include -#include - -#include - -struct module; -struct clk; - -struct omap_clk { - u16 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -/* Platform flags for the clkdev-OMAP integration code */ -#define CK_310 (1 << 0) -#define CK_7XX (1 << 1) /* 7xx, 850 */ -#define CK_1510 (1 << 2) -#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ -#define CK_1710 (1 << 4) /* 1710 extra for rate selection */ - - -/* Temporary, needed during the common clock framework conversion */ -#define __clk_get_name(clk) (clk->name) -#define __clk_get_parent(clk) (clk->parent) -#define __clk_get_rate(clk) (clk->rate) - -/** - * struct clkops - some clock function pointers - * @enable: fn ptr that enables the current clock in hardware - * @disable: fn ptr that enables the current clock in hardware - * @find_idlest: function returning the IDLEST register for the clock's IP blk - * @find_companion: function returning the "companion" clk reg for the clock - * @allow_idle: fn ptr that enables autoidle for the current clock in hardware - * @deny_idle: fn ptr that disables autoidle for the current clock in hardware - * - * A "companion" clk is an accompanying clock to the one being queried - * that must be enabled for the IP module connected to the clock to - * become accessible by the hardware. Neither @find_idlest nor - * @find_companion should be needed; that information is IP - * block-specific; the hwmod code has been created to handle this, but - * until hwmod data is ready and drivers have been converted to use PM - * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and - * @find_companion must, unfortunately, remain. - */ -struct clkops { - int (*enable)(struct clk *); - void (*disable)(struct clk *); - void (*find_idlest)(struct clk *, void __iomem **, - u8 *, u8 *); - void (*find_companion)(struct clk *, void __iomem **, - u8 *); - void (*allow_idle)(struct clk *); - void (*deny_idle)(struct clk *); -}; - -/* - * struct clk.flags possibilities - * - * XXX document the rest of the clock flags here - * - * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL - * bits share the same register. This flag allows the - * omap4_dpllmx*() code to determine which GATE_CTRL bit field - * should be used. This is a temporary solution - a better approach - * would be to associate clock type-specific data with the clock, - * similar to the struct dpll_data approach. - */ -#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 1) -#define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ -#define CLOCK_CLKOUTX2 (1 << 5) - -/** - * struct clk - OMAP struct clk - * @node: list_head connecting this clock into the full clock list - * @ops: struct clkops * for this clock - * @name: the name of the clock in the hardware (used in hwmod data and debug) - * @parent: pointer to this clock's parent struct clk - * @children: list_head connecting to the child clks' @sibling list_heads - * @sibling: list_head connecting this clk to its parent clk's @children - * @rate: current clock rate - * @enable_reg: register to write to enable the clock (see @enable_bit) - * @recalc: fn ptr that returns the clock's current rate - * @set_rate: fn ptr that can change the clock's current rate - * @round_rate: fn ptr that can round the clock's current rate - * @init: fn ptr to do clock-specific initialization - * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) - * @usecount: number of users that have requested this clock to be enabled - * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div - * @flags: see "struct clk.flags possibilities" above - * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) - * @src_offset: bitshift for source selection bitfield (OMAP1 only) - * - * XXX @rate_offset, @src_offset should probably be removed and OMAP1 - * clock code converted to use clksel. - * - * XXX @usecount is poorly named. It should be "enable_count" or - * something similar. "users" in the description refers to kernel - * code (core code or drivers) that have called clk_enable() and not - * yet called clk_disable(); the usecount of parent clocks is also - * incremented by the clock code when clk_enable() is called on child - * clocks and decremented by the clock code when clk_disable() is - * called on child clocks. - * - * XXX @clkdm, @usecount, @children, @sibling should be marked for - * internal use only. - * - * @children and @sibling are used to optimize parent-to-child clock - * tree traversals. (child-to-parent traversals use @parent.) - * - * XXX The notion of the clock's current rate probably needs to be - * separated from the clock's target rate. - */ -struct clk { - struct list_head node; - const struct clkops *ops; - const char *name; - struct clk *parent; - struct list_head children; - struct list_head sibling; /* node for children */ - unsigned long rate; - void __iomem *enable_reg; - unsigned long (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); - u8 enable_bit; - s8 usecount; - u8 fixed_div; - u8 flags; - u8 rate_offset; - u8 src_offset; -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif -}; - -struct clk_functions { - int (*clk_enable)(struct clk *clk); - void (*clk_disable)(struct clk *clk); - long (*clk_round_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_parent)(struct clk *clk, struct clk *parent); - void (*clk_allow_idle)(struct clk *clk); - void (*clk_deny_idle)(struct clk *clk); - void (*clk_disable_unused)(struct clk *clk); -}; - -extern int clk_init(struct clk_functions *custom_clocks); -extern void clk_preinit(struct clk *clk); -extern int clk_register(struct clk *clk); -extern void clk_reparent(struct clk *child, struct clk *parent); -extern void clk_unregister(struct clk *clk); -extern void propagate_rate(struct clk *clk); -extern void recalculate_root_clocks(void); -extern unsigned long followparent_recalc(struct clk *clk); -extern void clk_enable_init_clocks(void); -unsigned long omap_fixed_divisor_recalc(struct clk *clk); -extern struct clk *omap_clk_get_by_name(const char *name); -extern int omap_clk_enable_autoidle_all(void); -extern int omap_clk_disable_autoidle_all(void); - -extern const struct clkops clkops_null; - -extern struct clk dummy_ck; - -int omap1_clk_init(void); -void omap1_clk_late_init(void); -extern int omap1_clk_enable(struct clk *clk); -extern void omap1_clk_disable(struct clk *clk); -extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); -extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate); -extern unsigned long omap1_ckctl_recalc(struct clk *clk); -extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); -extern unsigned long omap1_sossi_recalc(struct clk *clk); -extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); -extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate); -extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate); -extern unsigned long omap1_uart_recalc(struct clk *clk); -extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate); -extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate); -extern void omap1_init_ext_clk(struct clk *clk); -extern int omap1_select_table_rate(struct clk *clk, unsigned long rate); -extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate); -extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); -extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); -extern unsigned long omap1_watchdog_recalc(struct clk *clk); - -#ifdef CONFIG_OMAP_RESET_CLOCKS -extern void omap1_clk_disable_unused(struct clk *clk); -#else -#define omap1_clk_disable_unused NULL -#endif - -struct uart_clk { - struct clk clk; - unsigned long sysc_addr; -}; - -/* Provide a method for preventing idling some ARM IDLECT clocks */ -struct arm_idlect1_clk { - struct clk clk; - unsigned long no_idle_count; - __u8 idlect_shift; -}; - -/* ARM_CKCTL bit shifts */ -#define CKCTL_PERDIV_OFFSET 0 -#define CKCTL_LCDDIV_OFFSET 2 -#define CKCTL_ARMDIV_OFFSET 4 -#define CKCTL_DSPDIV_OFFSET 6 -#define CKCTL_TCDIV_OFFSET 8 -#define CKCTL_DSPMMUDIV_OFFSET 10 -/*#define ARM_TIMXO 12*/ -#define EN_DSPCK 13 -/*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */ -/* DSP_CKCTL bit shifts */ -#define CKCTL_DSPPERDIV_OFFSET 0 - -/* ARM_IDLECT2 bit shifts */ -#define EN_WDTCK 0 -#define EN_XORPCK 1 -#define EN_PERCK 2 -#define EN_LCDCK 3 -#define EN_LBCK 4 /* Not on 1610/1710 */ -/*#define EN_HSABCK 5*/ -#define EN_APICK 6 -#define EN_TIMCK 7 -#define DMACK_REQ 8 -#define EN_GPIOCK 9 /* Not on 1610/1710 */ -/*#define EN_LBFREECK 10*/ -#define EN_CKOUT_ARM 11 - -/* ARM_IDLECT3 bit shifts */ -#define EN_OCPI_CK 0 -#define EN_TC1_CK 2 -#define EN_TC2_CK 4 - -/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */ -#define EN_DSPTIMCK 5 - -/* Various register defines for clock controls scattered around OMAP chip */ -#define SDW_MCLK_INV_BIT 2 /* In ULPD_CLKC_CTRL */ -#define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ -#define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ -#define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */ -#define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */ -#define SWD_CLK_DIV_CTRL_SEL 0xfffe0874 -#define COM_CLK_DIV_CTRL_SEL 0xfffe0878 -#define SOFT_REQ_REG 0xfffe0834 -#define SOFT_REQ_REG2 0xfffe0880 - -extern __u32 arm_idlect1_mask; -extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; - -extern const struct clkops clkops_dspck; -extern const struct clkops clkops_dummy; -extern const struct clkops clkops_uart_16xx; -extern const struct clkops clkops_generic; - -/* used for passing SoC type to omap1_{select,round_to}_table_rate() */ -extern u32 cpu_mask; - -#endif diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c deleted file mode 100644 index 36f04da4b939..000000000000 --- a/arch/arm/mach-omap1/clock_data.c +++ /dev/null @@ -1,920 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/clock_data.c - * - * Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation - * Written by Tuukka Tikkanen - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * To do: - * - Clocks that are only available on some chips should be marked with the - * chips that they are present on. - */ - -#include -#include -#include -#include -#include -#include - -#include /* for machine_is_* */ - -#include "soc.h" -#include "hardware.h" -#include "usb.h" /* for OTG_BASE */ -#include "iomap.h" -#include "clock.h" -#include "sram.h" - -/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ -#define IDL_CLKOUT_ARM_SHIFT 12 -#define IDLTIM_ARM_SHIFT 9 -#define IDLAPI_ARM_SHIFT 8 -#define IDLIF_ARM_SHIFT 6 -#define IDLLB_ARM_SHIFT 4 /* undocumented? */ -#define OMAP1510_IDLLCD_ARM_SHIFT 3 /* undocumented? */ -#define IDLPER_ARM_SHIFT 2 -#define IDLXORP_ARM_SHIFT 1 -#define IDLWDT_ARM_SHIFT 0 - -/* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */ -#define CONF_MOD_UART3_CLK_MODE_R 31 -#define CONF_MOD_UART2_CLK_MODE_R 30 -#define CONF_MOD_UART1_CLK_MODE_R 29 -#define CONF_MOD_MMC_SD_CLK_REQ_R 23 -#define CONF_MOD_MCBSP3_AUXON 20 - -/* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */ -#define CONF_MOD_SOSSI_CLK_EN_R 16 - -/* Some OTG_SYSCON_2-specific bit fields */ -#define OTG_SYSCON_2_UHOST_EN_SHIFT 8 - -/* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */ -#define SOFT_MMC2_DPLL_REQ_SHIFT 13 -#define SOFT_MMC_DPLL_REQ_SHIFT 12 -#define SOFT_UART3_DPLL_REQ_SHIFT 11 -#define SOFT_UART2_DPLL_REQ_SHIFT 10 -#define SOFT_UART1_DPLL_REQ_SHIFT 9 -#define SOFT_USB_OTG_DPLL_REQ_SHIFT 8 -#define SOFT_CAM_DPLL_REQ_SHIFT 7 -#define SOFT_COM_MCKO_REQ_SHIFT 6 -#define SOFT_PERIPH_REQ_SHIFT 5 /* sys_ck gate for UART2 ? */ -#define USB_REQ_EN_SHIFT 4 -#define SOFT_USB_REQ_SHIFT 3 /* sys_ck gate for USB host? */ -#define SOFT_SDW_REQ_SHIFT 2 /* sys_ck gate for Bluetooth? */ -#define SOFT_COM_REQ_SHIFT 1 /* sys_ck gate for com proc? */ -#define SOFT_DPLL_REQ_SHIFT 0 - -/* - * Omap1 clocks - */ - -static struct clk ck_ref = { - .name = "ck_ref", - .ops = &clkops_null, - .rate = 12000000, -}; - -static struct clk ck_dpll1 = { - .name = "ck_dpll1", - .ops = &clkops_null, - .parent = &ck_ref, -}; - -/* - * FIXME: This clock seems to be necessary but no-one has asked for its - * activation. [ FIX: SoSSI, SSR ] - */ -static struct arm_idlect1_clk ck_dpll1out = { - .clk = { - .name = "ck_dpll1out", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT | - ENABLE_ON_INIT, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_CKOUT_ARM, - .recalc = &followparent_recalc, - }, - .idlect_shift = IDL_CLKOUT_ARM_SHIFT, -}; - -static struct clk sossi_ck = { - .name = "ck_sossi", - .ops = &clkops_generic, - .parent = &ck_dpll1out.clk, - .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), - .enable_bit = CONF_MOD_SOSSI_CLK_EN_R, - .recalc = &omap1_sossi_recalc, - .set_rate = &omap1_set_sossi_rate, -}; - -static struct clk arm_ck = { - .name = "arm_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .rate_offset = CKCTL_ARMDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct arm_idlect1_clk armper_ck = { - .clk = { - .name = "armper_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = IDLPER_ARM_SHIFT, -}; - -/* - * FIXME: This clock seems to be necessary but no-one has asked for its - * activation. [ GPIO code for 1510 ] - */ -static struct clk arm_gpio_ck = { - .name = "ick", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = ENABLE_ON_INIT, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_GPIOCK, - .recalc = &followparent_recalc, -}; - -static struct arm_idlect1_clk armxor_ck = { - .clk = { - .name = "armxor_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = IDLXORP_ARM_SHIFT, -}; - -static struct arm_idlect1_clk armtim_ck = { - .clk = { - .name = "armtim_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_TIMCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = IDLTIM_ARM_SHIFT, -}; - -static struct arm_idlect1_clk armwdt_ck = { - .clk = { - .name = "armwdt_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_WDTCK, - .fixed_div = 14, - .recalc = &omap_fixed_divisor_recalc, - }, - .idlect_shift = IDLWDT_ARM_SHIFT, -}; - -static struct clk arminth_ck16xx = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &arm_ck, - .recalc = &followparent_recalc, - /* Note: On 16xx the frequency can be divided by 2 by programming - * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 - * - * 1510 version is in TC clocks. - */ -}; - -static struct clk dsp_ck = { - .name = "dsp_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), - .enable_bit = EN_DSPCK, - .rate_offset = CKCTL_DSPDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct clk dspmmu_ck = { - .name = "dspmmu_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .rate_offset = CKCTL_DSPMMUDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct clk dspper_ck = { - .name = "dspper_ck", - .ops = &clkops_dspck, - .parent = &ck_dpll1, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &omap1_ckctl_recalc_dsp_domain, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = &omap1_clk_set_rate_dsp_domain, -}; - -static struct clk dspxor_ck = { - .name = "dspxor_ck", - .ops = &clkops_dspck, - .parent = &ck_ref, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, -}; - -static struct clk dsptim_ck = { - .name = "dsptim_ck", - .ops = &clkops_dspck, - .parent = &ck_ref, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_DSPTIMCK, - .recalc = &followparent_recalc, -}; - -static struct arm_idlect1_clk tc_ck = { - .clk = { - .name = "tc_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .rate_offset = CKCTL_TCDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = IDLIF_ARM_SHIFT, -}; - -static struct clk arminth_ck1510 = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, - /* Note: On 1510 the frequency follows TC_CK - * - * 16xx version is in MPU clocks. - */ -}; - -static struct clk tipb_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "tipb_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk l3_ocpi_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "l3_ocpi_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_OCPI_CK, - .recalc = &followparent_recalc, -}; - -static struct clk tc1_ck = { - .name = "tc1_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_TC1_CK, - .recalc = &followparent_recalc, -}; - -/* - * FIXME: This clock seems to be necessary but no-one has asked for its - * activation. [ pm.c (SRAM), CCP, Camera ] - */ -static struct clk tc2_ck = { - .name = "tc2_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = ENABLE_ON_INIT, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_TC2_CK, - .recalc = &followparent_recalc, -}; - -static struct clk dma_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "dma_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk dma_lcdfree_ck = { - .name = "dma_lcdfree_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct arm_idlect1_clk api_ck = { - .clk = { - .name = "api_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_APICK, - .recalc = &followparent_recalc, - }, - .idlect_shift = IDLAPI_ARM_SHIFT, -}; - -static struct arm_idlect1_clk lb_ck = { - .clk = { - .name = "lb_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LBCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = IDLLB_ARM_SHIFT, -}; - -static struct clk rhea1_ck = { - .name = "rhea1_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk rhea2_ck = { - .name = "rhea2_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk lcd_ck_16xx = { - .name = "lcd_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct arm_idlect1_clk lcd_ck_1510 = { - .clk = { - .name = "lcd_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = OMAP1510_IDLLCD_ARM_SHIFT, -}; - -/* - * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. - * - * XXX does this need SYSC register handling? - */ -static struct clk uart1_1510 = { - .name = "uart1_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = CONF_MOD_UART1_CLK_MODE_R, - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -/* - * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. - * - * XXX SYSC register handling does not belong in the clock framework - */ -static struct uart_clk uart1_16xx = { - .clk = { - .name = "uart1_ck", - .ops = &clkops_uart_16xx, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = CONF_MOD_UART1_CLK_MODE_R, - }, - .sysc_addr = 0xfffb0054, -}; - -/* - * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. - * - * XXX does this need SYSC register handling? - */ -static struct clk uart2_ck = { - .name = "uart2_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = CONF_MOD_UART2_CLK_MODE_R, - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -/* - * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. - * - * XXX does this need SYSC register handling? - */ -static struct clk uart3_1510 = { - .name = "uart3_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = CONF_MOD_UART3_CLK_MODE_R, - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -/* - * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. - * - * XXX SYSC register handling does not belong in the clock framework - */ -static struct uart_clk uart3_16xx = { - .clk = { - .name = "uart3_ck", - .ops = &clkops_uart_16xx, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = CONF_MOD_UART3_CLK_MODE_R, - }, - .sysc_addr = 0xfffb9854, -}; - -static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ - .name = "usb_clko", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 6000000, - .flags = ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), - .enable_bit = USB_MCLK_EN_BIT, -}; - -static struct clk usb_hhc_ck1510 = { - .name = "usb_hhc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ - .flags = ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = USB_HOST_HHC_UHOST_EN, -}; - -static struct clk usb_hhc_ck16xx = { - .name = "usb_hhc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ - .flags = ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ - .enable_bit = OTG_SYSCON_2_UHOST_EN_SHIFT -}; - -static struct clk usb_dc_ck = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT, -}; - -static struct clk uart1_7xx = { - .name = "uart1_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 12000000, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 9, -}; - -static struct clk uart2_7xx = { - .name = "uart2_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 12000000, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 11, -}; - -static struct clk mclk_1510 = { - .name = "mclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = SOFT_COM_MCKO_REQ_SHIFT, -}; - -static struct clk mclk_16xx = { - .name = "mclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), - .enable_bit = COM_ULPD_PLL_CLK_REQ, - .set_rate = &omap1_set_ext_clk_rate, - .round_rate = &omap1_round_ext_clk_rate, - .init = &omap1_init_ext_clk, -}; - -static struct clk bclk_1510 = { - .name = "bclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, -}; - -static struct clk bclk_16xx = { - .name = "bclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), - .enable_bit = SWD_ULPD_PLL_CLK_REQ, - .set_rate = &omap1_set_ext_clk_rate, - .round_rate = &omap1_round_ext_clk_rate, - .init = &omap1_init_ext_clk, -}; - -static struct clk mmc1_ck = { - .name = "mmc1_ck", - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = CONF_MOD_MMC_SD_CLK_REQ_R, -}; - -/* - * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as - * CONF_MOD_MCBSP3_AUXON ?? - */ -static struct clk mmc2_ck = { - .name = "mmc2_ck", - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 20, -}; - -static struct clk mmc3_ck = { - .name = "mmc3_ck", - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = SOFT_MMC_DPLL_REQ_SHIFT, -}; - -static struct clk virtual_ck_mpu = { - .name = "mpu", - .ops = &clkops_null, - .parent = &arm_ck, /* Is smarter alias for */ - .recalc = &followparent_recalc, - .set_rate = &omap1_select_table_rate, - .round_rate = &omap1_round_to_table_rate, -}; - -/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK -remains active during MPU idle whenever this is enabled */ -static struct clk i2c_fck = { - .name = "i2c_fck", - .ops = &clkops_null, - .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armxor_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk i2c_ick = { - .name = "i2c_ick", - .ops = &clkops_null, - .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armper_ck.clk, - .recalc = &followparent_recalc, -}; - -/* - * clkdev integration - */ - -static struct omap_clk omap_clks[] = { - /* non-ULPD clocks */ - CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310 | CK_7XX), - /* CK_GEN1 clocks */ - CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), - CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), - CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_gpio.0", "ick", &arm_gpio_ck, CK_1510 | CK_310), - CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), - CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), - /* CK_GEN2 clocks */ - CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), - /* CK_GEN3 clocks */ - CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), - CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), - CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), - CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), - CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), - CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), - CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), - CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), - CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), - CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), - /* ULPD clocks */ - CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), - CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), - CLK(NULL, "uart1_ck", &uart1_7xx, CK_7XX), - CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "uart2_ck", &uart2_7xx, CK_7XX), - CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), - CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), - CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX), - CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), - CLK(NULL, "mclk", &mclk_16xx, CK_16XX), - CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), - CLK(NULL, "bclk", &bclk_16xx, CK_16XX), - CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), - CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), - CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), - CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), - /* Virtual clocks */ - CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("omap_i2c.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK("omap_i2c.1", "ick", &i2c_ick, CK_16XX), - CLK("omap_i2c.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), - CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX), - CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX), - CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX), - CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX), - CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), - CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), -}; - -/* - * init - */ - -static void __init omap1_show_rates(void) -{ - pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); -} - -u32 cpu_mask; - -int __init omap1_clk_init(void) -{ - struct omap_clk *c; - int crystal_type = 0; /* Default 12 MHz */ - u32 reg; - -#ifdef CONFIG_DEBUG_LL - /* - * Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. - */ - omap_writel(0x3 << 29, MOD_CONF_CTRL_0); -#endif - - /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ - reg = omap_readw(SOFT_REQ_REG) & (1 << 4); - omap_writew(reg, SOFT_REQ_REG); - if (!cpu_is_omap15xx()) - omap_writew(0, SOFT_REQ_REG2); - - /* By default all idlect1 clocks are allowed to idle */ - arm_idlect1_mask = ~0; - - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - clk_preinit(c->lk.clk); - - cpu_mask = 0; - if (cpu_is_omap1710()) - cpu_mask |= CK_1710; - if (cpu_is_omap16xx()) - cpu_mask |= CK_16XX; - if (cpu_is_omap1510()) - cpu_mask |= CK_1510; - if (cpu_is_omap7xx()) - cpu_mask |= CK_7XX; - if (cpu_is_omap310()) - cpu_mask |= CK_310; - - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - if (c->cpu & cpu_mask) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - } - - /* Pointers to these clocks are needed by code in clock.c */ - api_ck_p = clk_get(NULL, "api_ck"); - ck_dpll1_p = clk_get(NULL, "ck_dpll1"); - ck_ref_p = clk_get(NULL, "ck_ref"); - - if (cpu_is_omap7xx()) - ck_ref.rate = 13000000; - if (cpu_is_omap16xx() && crystal_type == 2) - ck_ref.rate = 19200000; - - pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", - omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), - omap_readw(ARM_CKCTL)); - - /* We want to be in syncronous scalable mode */ - omap_writew(0x1000, ARM_SYSST); - - - /* - * Initially use the values set by bootloader. Determine PLL rate and - * recalculate dependent clocks as if kernel had changed PLL or - * divisors. See also omap1_clk_late_init() that can reprogram dpll1 - * after the SRAM is initialized. - */ - { - unsigned pll_ctl_val = omap_readw(DPLL_CTL); - - ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ - if (pll_ctl_val & 0x10) { - /* PLL enabled, apply multiplier and divisor */ - if (pll_ctl_val & 0xf80) - ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; - ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; - } else { - /* PLL disabled, apply bypass divisor */ - switch (pll_ctl_val & 0xc) { - case 0: - break; - case 0x4: - ck_dpll1.rate /= 2; - break; - default: - ck_dpll1.rate /= 4; - break; - } - } - } - propagate_rate(&ck_dpll1); - /* Cache rates for clocks connected to ck_ref (not dpll1) */ - propagate_rate(&ck_ref); - omap1_show_rates(); - if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { - /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, - OMAP7XX_PCC_UPLD_CTRL); - } - - /* Amstrad Delta wants BCLK high when inactive */ - if (machine_is_ams_delta()) - omap_writel(omap_readl(ULPD_CLOCK_CTRL) | - (1 << SDW_MCLK_INV_BIT), - ULPD_CLOCK_CTRL); - - /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ - /* (on 730, bit 13 must not be cleared) */ - if (cpu_is_omap7xx()) - omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); - else - omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); - - /* Put DSP/MPUI into reset until needed */ - omap_writew(0, ARM_RSTCT1); - omap_writew(1, ARM_RSTCT2); - omap_writew(0x400, ARM_IDLECT1); - - /* - * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) - * of the ARM_IDLECT2 register must be set to zero. The power-on - * default value of this bit is one. - */ - omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable(&armper_ck.clk); - clk_enable(&armxor_ck.clk); - clk_enable(&armtim_ck.clk); /* This should be done by timer code */ - - if (cpu_is_omap15xx()) - clk_enable(&arm_gpio_ck); - - return 0; -} - -#define OMAP1_DPLL1_SANE_VALUE 60000000 - -void __init omap1_clk_late_init(void) -{ - unsigned long rate = ck_dpll1.rate; - - /* Find the highest supported frequency and enable it */ - if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { - pr_err("System frequencies not set, using default. Check your config.\n"); - /* - * Reprogramming the DPLL is tricky, it must be done from SRAM. - */ - omap_sram_reprogram_clock(0x2290, 0x0005); - ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; - } - propagate_rate(&ck_dpll1); - omap1_show_rates(); - loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate); -} diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index 5ceff05e15c0..fb360902c6fc 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -77,6 +77,8 @@ void omap1_init_irq(void); void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs); void omap1_init_late(void); void omap1_restart(enum reboot_mode, const char *); +int omap1_clk_init(void); +void omap1_clk_late_init(void); extern void __init omap_check_revision(void); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 36b03410b210..01213ad07b5c 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -25,7 +25,6 @@ #include "camera.h" #include "hardware.h" #include "common.h" -#include "clock.h" #include "mmc.h" #include "sram.h" diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index cf425aeeb240..b0465a956ea8 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -18,7 +18,6 @@ #include "mux.h" #include "iomap.h" #include "common.h" -#include "clock.h" /* * The machine specific code may provide the extra mapping besides the diff --git a/arch/arm/mach-omap1/opp.h b/arch/arm/mach-omap1/opp.h deleted file mode 100644 index 5b8b9c8edfe3..000000000000 --- a/arch/arm/mach-omap1/opp.h +++ /dev/null @@ -1,26 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/arm/mach-omap1/opp.h - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - */ - -#ifndef __ARCH_ARM_MACH_OMAP1_OPP_H -#define __ARCH_ARM_MACH_OMAP1_OPP_H - -#include - -struct mpu_rate { - unsigned long rate; - unsigned long xtal; - unsigned long pll_rate; - __u16 ckctl_val; - __u16 dpllctl_val; - u32 flags; -}; - -extern struct mpu_rate omap1_rate_table[]; - -#endif diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c deleted file mode 100644 index a27ca7dc03a2..000000000000 --- a/arch/arm/mach-omap1/opp_data.c +++ /dev/null @@ -1,51 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/opp_data.c - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - */ - -#include "clock.h" -#include "opp.h" - -/*------------------------------------------------------------------------- - * Omap1 MPU rate table - *-------------------------------------------------------------------------*/ -struct mpu_rate omap1_rate_table[] = { - /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL - * NOTE: Comment order here is different from bits in CKCTL value: - * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv - */ - { 216000000, 12000000, 216000000, 0x050d, 0x2910, /* 1/1/2/2/2/8 */ - CK_1710 }, - { 195000000, 13000000, 195000000, 0x050e, 0x2790, /* 1/1/2/2/4/8 */ - CK_7XX }, - { 192000000, 19200000, 192000000, 0x050f, 0x2510, /* 1/1/2/2/8/8 */ - CK_16XX }, - { 192000000, 12000000, 192000000, 0x050f, 0x2810, /* 1/1/2/2/8/8 */ - CK_16XX }, - { 96000000, 12000000, 192000000, 0x055f, 0x2810, /* 2/2/2/2/8/8 */ - CK_16XX }, - { 48000000, 12000000, 192000000, 0x0baf, 0x2810, /* 4/4/4/8/8/8 */ - CK_16XX }, - { 24000000, 12000000, 192000000, 0x0fff, 0x2810, /* 8/8/8/8/8/8 */ - CK_16XX }, - { 182000000, 13000000, 182000000, 0x050e, 0x2710, /* 1/1/2/2/4/8 */ - CK_7XX }, - { 168000000, 12000000, 168000000, 0x010f, 0x2710, /* 1/1/1/2/8/8 */ - CK_16XX|CK_7XX }, - { 150000000, 12000000, 150000000, 0x010a, 0x2cb0, /* 1/1/1/2/4/4 */ - CK_1510 }, - { 120000000, 12000000, 120000000, 0x010a, 0x2510, /* 1/1/1/2/4/4 */ - CK_16XX|CK_1510|CK_310|CK_7XX }, - { 96000000, 12000000, 96000000, 0x0005, 0x2410, /* 1/1/1/1/2/2 */ - CK_16XX|CK_1510|CK_310|CK_7XX }, - { 60000000, 12000000, 60000000, 0x0005, 0x2290, /* 1/1/1/1/2/2 */ - CK_16XX|CK_1510|CK_310|CK_7XX }, - { 30000000, 12000000, 60000000, 0x0555, 0x2290, /* 2/2/2/2/2/2 */ - CK_16XX|CK_1510|CK_310|CK_7XX }, - { 0, 0, 0, 0, 0 }, -}; - diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index dd3743c891b7..754119028138 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -61,7 +61,6 @@ #include "mux.h" #include "irqs.h" #include "iomap.h" -#include "clock.h" #include "pm.h" #include "soc.h" #include "sram.h"