From patchwork Sat Feb 19 21:53:20 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Drew Fustini X-Patchwork-Id: 544164 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4494FC433FE for ; Sat, 19 Feb 2022 21:55:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S243160AbiBSV4J (ORCPT ); Sat, 19 Feb 2022 16:56:09 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:55206 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S243167AbiBSV4G (ORCPT ); Sat, 19 Feb 2022 16:56:06 -0500 Received: from mail-pj1-x102c.google.com (mail-pj1-x102c.google.com [IPv6:2607:f8b0:4864:20::102c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9B10A54194 for ; Sat, 19 Feb 2022 13:55:44 -0800 (PST) Received: by mail-pj1-x102c.google.com with SMTP id v4so11570099pjh.2 for ; Sat, 19 Feb 2022 13:55:44 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20210112.gappssmtp.com; s=20210112; h=from:to:subject:date:message-id:in-reply-to:references:mime-version :content-transfer-encoding; bh=DPqC7sk0jXG3KL4pgR3flZBRy+4blHrbIS6/yBS27Mg=; b=RCOdYH6WIaW2xVqRGFA32u3oOOKisUBbxh2bQZ6OLEuubkB37e/DLlUPUI/qS7ZsPp K9vvLxcUrbv9BMjXSg9sciDkhvYNEdsasmZcb9Ita6e1im3+L2SufG4wk2DJXmvo5pK+ Wx2IcMPhbQ1baTb9PqWZsTEBmfmjFo8u1nF5FRQu3fsbnEslXRYQAawKzZ/FeLpMmYU+ P3YLroiH1jtnPz8t/uPk7nZkuRosB1f+3Lu82Nd6FqbNMUN3ETXpC3qUUkI2D6KutTCV MvLoFxsc1KMYD2sK6O4571yQv32Zu02CNtmn8AKwLrNsFHFGSBRAnJHyhvH6+ZTianzC Gd9g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=DPqC7sk0jXG3KL4pgR3flZBRy+4blHrbIS6/yBS27Mg=; b=kLAMY0zCa40Mv5o1gKjEWsOIw+TwRDXFe18AqScEha/bDpFIcNEY4Is+PeDQhYi5Zw nMPnVhYPDvlzdgS0yIUFXXDJPGPpKTkgSyW+9hSSkuN/q0XpLk/XJbHZ6C2zxw6Z/bUp ymnZpPRfsWA5OshoWnEXyG1v+6V/YEiqkiPJnYm9ddzWj2M/kFoPJ/a/Bv35B+7qreoP dI/45v9VmhxgffffjuwZpiCX29AO/voGhyP0fEZGQSqTWqGr7n6c1GJhRptfODw9B4fX 5HYxsUuhAwLod3cosI1UQLdpUuKLsYhBzOL6fCaE6aie3tIWRprFsn31LqFJ8gyCZqbP UIsg== X-Gm-Message-State: AOAM531gcskQ2Ay1aiaMPxXRYj/y2YVvZyvvmBqnlvlkss9GdM0F6KzH g5/sycWn1jXxl6L/W/8K5dNBJA== X-Google-Smtp-Source: ABdhPJyrjgGWD8uK2oJsFpdirNDfgtzWoV5CCSu0s9ORmrFOQ1CeFPo+nYa0r4tS45fI/XS//g8JLQ== X-Received: by 2002:a17:90a:9309:b0:1bc:1bf1:dad4 with SMTP id p9-20020a17090a930900b001bc1bf1dad4mr1336912pjo.169.1645307744093; Sat, 19 Feb 2022 13:55:44 -0800 (PST) Received: from x1.hsd1.or.comcast.net ([2601:1c2:1001:7090:31ab:1e81:9550:f30a]) by smtp.gmail.com with ESMTPSA id i17sm13447337pgn.82.2022.02.19.13.55.42 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 19 Feb 2022 13:55:43 -0800 (PST) From: Drew Fustini To: =?utf-8?q?Beno=C3=AEt_Cousson?= , Bjorn Andersson , Dave Gerlach , devicetree@vger.kernel.org, Drew Fustini , Keerthy , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-remoteproc@vger.kernel.org, Mathieu Poirier , Nishanth Menon , Rob Herring , Santosh Shilimkar , Tony Lindgren , s-anna@ti.com, khilman@baylibre.com Subject: [PATCH 03/11] soc: ti: wkup_m3_ipc: Add support for toggling VTT regulator Date: Sat, 19 Feb 2022 13:53:20 -0800 Message-Id: <20220219215328.485660-4-dfustini@baylibre.com> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220219215328.485660-1-dfustini@baylibre.com> References: <20220219215328.485660-1-dfustini@baylibre.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org From: Dave Gerlach Some boards (currently AM335x EVM-SK) provides s/w control via GPIO to toggle VTT regulator to reduce power consumption in low power state. The VTT regulator should be disabled after enabling self-refresh on suspend, and should be enabled before disabling self-refresh on resume. This is to allow proper self-refresh entry/exit commands to be transmitted to the memory. Add support for toggling VTT regulator using DT properties. Actual toggling happens in CM3 Firmware. The enable option & the GPIO pin used is collected in A8 Core and then sent to CM3 using IPC registers. Note: Here it is assumed that VTT Toggle will be done using a pin on GPIO-0 Instance. The reason is GPIO-0 is in wakeup domain. Signed-off-by: Dave Gerlach Signed-off-by: Keerthy Signed-off-by: Drew Fustini --- drivers/soc/ti/wkup_m3_ipc.c | 27 +++++++++++++++++++++++++-- include/linux/wkup_m3_ipc.h | 1 + 2 files changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c index 72386bd393fe..974b4118a893 100644 --- a/drivers/soc/ti/wkup_m3_ipc.c +++ b/drivers/soc/ti/wkup_m3_ipc.c @@ -40,6 +40,13 @@ #define M3_FW_VERSION_MASK 0xffff #define M3_WAKE_SRC_MASK 0xff +#define IPC_MEM_TYPE_SHIFT (0x0) +#define IPC_MEM_TYPE_MASK (0x7 << 0) +#define IPC_VTT_STAT_SHIFT (0x3) +#define IPC_VTT_STAT_MASK (0x1 << 3) +#define IPC_VTT_GPIO_PIN_SHIFT (0x4) +#define IPC_VTT_GPIO_PIN_MASK (0x3f << 4) + #define M3_STATE_UNKNOWN 0 #define M3_STATE_RESET 1 #define M3_STATE_INITED 2 @@ -215,6 +222,12 @@ static int wkup_m3_is_available(struct wkup_m3_ipc *m3_ipc) (m3_ipc->state != M3_STATE_UNKNOWN)); } +static void wkup_m3_set_vtt_gpio(struct wkup_m3_ipc *m3_ipc, int gpio) +{ + m3_ipc->vtt_conf = (1 << IPC_VTT_STAT_SHIFT) | + (gpio << IPC_VTT_GPIO_PIN_SHIFT); +} + /* Public functions */ /** * wkup_m3_set_mem_type - Pass wkup_m3 which type of memory is in use @@ -294,7 +307,8 @@ static int wkup_m3_prepare_low_power(struct wkup_m3_ipc *m3_ipc, int state) /* Program each required IPC register then write defaults to others */ wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->resume_addr, 0); wkup_m3_ctrl_ipc_write(m3_ipc, m3_power_state, 1); - wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->mem_type, 4); + wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->mem_type | + m3_ipc->vtt_conf, 4); wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 2); wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 3); @@ -433,12 +447,13 @@ static int wkup_m3_rproc_boot_thread(void *arg) static int wkup_m3_ipc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - int irq, ret; + int irq, ret, temp; phandle rproc_phandle; struct rproc *m3_rproc; struct resource *res; struct task_struct *task; struct wkup_m3_ipc *m3_ipc; + struct device_node *np = dev->of_node; m3_ipc = devm_kzalloc(dev, sizeof(*m3_ipc), GFP_KERNEL); if (!m3_ipc) @@ -496,6 +511,14 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev) m3_ipc->ops = &ipc_ops; + if (of_find_property(np, "ti,needs-vtt-toggle", NULL) && + !(of_property_read_u32(np, "ti,vtt-gpio-pin", &temp))) { + if (temp >= 0 && temp <= 31) + wkup_m3_set_vtt_gpio(m3_ipc, temp); + else + dev_warn(dev, "Invalid VTT GPIO(%d) pin\n", temp); + } + /* * Wait for firmware loading completion in a thread so we * can boot the wkup_m3 as soon as it's ready without holding diff --git a/include/linux/wkup_m3_ipc.h b/include/linux/wkup_m3_ipc.h index 3f496967b538..2bc52c6381d5 100644 --- a/include/linux/wkup_m3_ipc.h +++ b/include/linux/wkup_m3_ipc.h @@ -33,6 +33,7 @@ struct wkup_m3_ipc { int mem_type; unsigned long resume_addr; + int vtt_conf; int state; struct completion sync_complete;