diff mbox series

[22/27] thermal/ti-soc-thermal: Convert to platform remove callback returning void

Message ID 20230712081258.29254-22-frank.li@vivo.com
State New
Headers show
Series None | expand

Commit Message

Yangtao Li July 12, 2023, 8:12 a.m. UTC
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Cc: Uwe Kleine-K├Ânig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
---
 drivers/thermal/ti-soc-thermal/ti-bandgap.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index a1c9a1530183..6c23f2095631 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1068,8 +1068,7 @@  int ti_bandgap_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static
-int ti_bandgap_remove(struct platform_device *pdev)
+static void ti_bandgap_remove(struct platform_device *pdev)
 {
 	struct ti_bandgap *bgp = platform_get_drvdata(pdev);
 	int i;
@@ -1098,8 +1097,6 @@  int ti_bandgap_remove(struct platform_device *pdev)
 
 	if (TI_BANDGAP_HAS(bgp, TSHUT))
 		free_irq(gpiod_to_irq(bgp->tshut_gpiod), NULL);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -1283,7 +1280,7 @@  MODULE_DEVICE_TABLE(of, of_ti_bandgap_match);
 
 static struct platform_driver ti_bandgap_sensor_driver = {
 	.probe = ti_bandgap_probe,
-	.remove = ti_bandgap_remove,
+	.remove_new = ti_bandgap_remove,
 	.driver = {
 			.name = "ti-soc-thermal",
 			.pm = DEV_PM_OPS,