diff mbox series

[-next,11/11] gpio: zynq: Use helper function devm_clk_get_enabled()

Message ID 20230818093018.1051434-12-lizetao1@huawei.com
State New
Headers show
Series gpio: Use devm_clk_get_*() helper function to simplify the drivers. | expand

Commit Message

Li Zetao Aug. 18, 2023, 9:30 a.m. UTC
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for
prepared and enabled clocks"), devm_clk_get() and clk_prepare_enable()
can now be replaced by devm_clk_get_enabled() when the driver enables
(and possibly prepares) the clocks for the whole lifetime of the device.
Moreover, it is no longer necessary to unprepare and disable the clocks
explicitly.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
---
 drivers/gpio/gpio-zynq.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

Comments

Andy Shevchenko Aug. 18, 2023, 3:13 p.m. UTC | #1
On Fri, Aug 18, 2023 at 05:30:18PM +0800, Li Zetao wrote:
> Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for
> prepared and enabled clocks"), devm_clk_get() and clk_prepare_enable()
> can now be replaced by devm_clk_get_enabled() when the driver enables
> (and possibly prepares) the clocks for the whole lifetime of the device.
> Moreover, it is no longer necessary to unprepare and disable the clocks
> explicitly.

...

> -		return dev_err_probe(&pdev->dev, PTR_ERR(gpio->clk), "input clock not found.\n");
> +		return dev_err_probe(&pdev->dev, PTR_ERR(gpio->clk),
> +				     "input clock not found or unable to enable clock.\n");

With this change dropped,
Reviewed-by: Andy Shevchenko <andy@kernel.org>
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 0a7264aabe48..98cb38c95837 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -918,15 +918,10 @@  static int zynq_gpio_probe(struct platform_device *pdev)
 	chip->ngpio = gpio->p_data->ngpio;
 
 	/* Retrieve GPIO clock */
-	gpio->clk = devm_clk_get(&pdev->dev, NULL);
+	gpio->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(gpio->clk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(gpio->clk), "input clock not found.\n");
-
-	ret = clk_prepare_enable(gpio->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to enable clock.\n");
-		return ret;
-	}
+		return dev_err_probe(&pdev->dev, PTR_ERR(gpio->clk),
+				     "input clock not found or unable to enable clock.\n");
 
 	spin_lock_init(&gpio->dirlock);
 
@@ -977,7 +972,6 @@  static int zynq_gpio_probe(struct platform_device *pdev)
 	pm_runtime_put(&pdev->dev);
 err_pm_dis:
 	pm_runtime_disable(&pdev->dev);
-	clk_disable_unprepare(gpio->clk);
 
 	return ret;
 }
@@ -997,7 +991,6 @@  static int zynq_gpio_remove(struct platform_device *pdev)
 	if (ret < 0)
 		dev_warn(&pdev->dev, "pm_runtime_get_sync() Failed\n");
 	gpiochip_remove(&gpio->chip);
-	clk_disable_unprepare(gpio->clk);
 	device_set_wakeup_capable(&pdev->dev, 0);
 	pm_runtime_disable(&pdev->dev);
 	return 0;