@@ -76,21 +76,21 @@ else:
examples:
- |
- bsca: i2c@f0406200 {
- clock-frequency = <390000>;
- compatible = "brcm,brcmstb-i2c";
- interrupt-parent = <&irq0_intc>;
- reg = <0xf0406200 0x58>;
- interrupts = <0x18>;
- interrupt-names = "upg_bsca";
- };
+ bsca: i2c@f0406200 {
+ compatible = "brcm,brcmstb-i2c";
+ reg = <0xf0406200 0x58>;
+ clock-frequency = <390000>;
+ interrupt-parent = <&irq0_intc>;
+ interrupts = <0x18>;
+ interrupt-names = "upg_bsca";
+ };
- |
- ddc0: i2c@7ef04500 {
- compatible = "brcm,bcm2711-hdmi-i2c";
- reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
- reg-names = "bsc", "auto-i2c";
- clock-frequency = <390000>;
- };
+ ddc0: i2c@7ef04500 {
+ compatible = "brcm,bcm2711-hdmi-i2c";
+ reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+ reg-names = "bsc", "auto-i2c";
+ clock-frequency = <390000>;
+ };
...
@@ -109,65 +109,65 @@ examples:
// Example for a bus to be demuxed. It contains various I2C clients for
// HDMI, so the bus is named "i2c-hdmi":
i2chdmi: i2c-mux3 {
- compatible = "i2c-demux-pinctrl";
- i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
- i2c-bus-name = "i2c-hdmi";
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
+ i2c-bus-name = "i2c-hdmi";
+ #address-cells = <1>;
+ #size-cells = <0>;
- ak4643: codec@12 {
- compatible = "asahi-kasei,ak4643";
- #sound-dai-cells = <0>;
- reg = <0x12>;
+ ak4643: codec@12 {
+ compatible = "asahi-kasei,ak4643";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep0>;
+ };
};
+ };
- composite-in@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&cec_clock>;
+ clock-names = "cec";
- port {
- adv7180: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin1ep0>;
- };
+ avdd-supply = <&fixedregulator1v8>;
+ dvdd-supply = <&fixedregulator1v8>;
+ pvdd-supply = <&fixedregulator1v8>;
+ dvdd-3v-supply = <&fixedregulator3v3>;
+ bgvdd-supply = <&fixedregulator1v8>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
};
- };
+ };
- hdmi@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&cec_clock>;
- clock-names = "cec";
-
- avdd-supply = <&fixedregulator1v8>;
- dvdd-supply = <&fixedregulator1v8>;
- pvdd-supply = <&fixedregulator1v8>;
- dvdd-3v-supply = <&fixedregulator3v3>;
- bgvdd-supply = <&fixedregulator1v8>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con_out>;
- };
- };
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
};
+ };
};
+ };
};
@@ -44,11 +44,11 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
iic0: i2c@e0070000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,iic-emev2";
- reg = <0xe0070000 0x28>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
- clocks = <&iic0_sclk>;
- clock-names = "sclk";
+ compatible = "renesas,iic-emev2";
+ reg = <0xe0070000 0x28>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&iic0_sclk>;
+ clock-names = "sclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
@@ -153,14 +153,14 @@ examples:
#include <dt-bindings/power/r8a7791-sysc.h>
i2c0: i2c@e6508000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
- reg = <0xe6508000 0x40>;
- interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <400000>;
- clocks = <&cpg CPG_MOD 931>;
- power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
- resets = <&cpg 931>;
- i2c-scl-internal-delay-ns = <6>;
+ compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
+ reg = <0xe6508000 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ i2c-scl-internal-delay-ns = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
@@ -97,21 +97,21 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
i2c0: i2c@fcfee000 {
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee000 0x44>;
- interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
- "tmoi";
- clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
- clock-frequency = <100000>;
- power-domains = <&cpg_clocks>;
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee000 0x44>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
+ "tmoi";
+ clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+ clock-frequency = <100000>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
@@ -134,16 +134,16 @@ examples:
#include <dt-bindings/power/r8a7790-sysc.h>
iic0: i2c@e6500000 {
- compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
- "renesas,rmobile-iic";
- reg = <0xe6500000 0x425>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 318>;
- clock-frequency = <400000>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
- dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
- resets = <&cpg 318>;
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0xe6500000 0x425>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>;
+ clock-frequency = <400000>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
@@ -145,31 +145,31 @@ examples:
#include <dt-bindings/mfd/stm32f7-rcc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
//Example 1 (with st,stm32f4-i2c compatible)
- i2c@40005400 {
- compatible = "st,stm32f4-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x40005400 0x400>;
- interrupts = <31>,
- <32>;
- resets = <&rcc 277>;
- clocks = <&rcc 0 149>;
- };
+ i2c@40005400 {
+ compatible = "st,stm32f4-i2c";
+ reg = <0x40005400 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc 277>;
+ clocks = <&rcc 0 149>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- |
#include <dt-bindings/mfd/stm32f7-rcc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
//Example 2 (with st,stm32f7-i2c compatible)
- i2c@40005800 {
- compatible = "st,stm32f7-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x40005800 0x400>;
- interrupts = <31>,
- <32>;
- resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
- clocks = <&rcc 1 CLK_I2C1>;
- };
+ i2c@40005800 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40005800 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+ clocks = <&rcc 1 CLK_I2C1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- |
#include <dt-bindings/mfd/stm32f7-rcc.h>
@@ -178,16 +178,16 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
- i2c@40013000 {
- compatible = "st,stm32mp15-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x40013000 0x400>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc I2C2_K>;
- resets = <&rcc I2C2_R>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- st,syscfg-fmp = <&syscfg 0x4 0x2>;
- };
+ i2c@40013000 {
+ compatible = "st,stm32mp15-i2c";
+ reg = <0x40013000 0x400>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc I2C2_K>;
+ resets = <&rcc I2C2_R>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ st,syscfg-fmp = <&syscfg 0x4 0x2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
@@ -82,9 +82,9 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
main_i2c0: i2c@2000000 {
- compatible = "ti,j721e-i2c", "ti,omap4-i2c";
- reg = <0x2000000 0x100>;
- interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x2000000 0x100>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
Bindings coding style expects 2- or 4-space indentation in the DTS example. Correct files having something odd (6- or 8-space) to 4-space while re-ordering few properties according to DTS coding style (the first property should be compatible, then reg/ranges). No functional impact. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 28 +++--- .../devicetree/bindings/i2c/i2c-demux-pinctrl.yaml | 106 ++++++++++----------- .../devicetree/bindings/i2c/renesas,iic-emev2.yaml | 14 +-- .../devicetree/bindings/i2c/renesas,rcar-i2c.yaml | 20 ++-- .../devicetree/bindings/i2c/renesas,riic.yaml | 34 +++---- .../bindings/i2c/renesas,rmobile-iic.yaml | 24 ++--- .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 66 ++++++------- .../devicetree/bindings/i2c/ti,omap4-i2c.yaml | 12 +-- 8 files changed, 152 insertions(+), 152 deletions(-)