diff mbox series

[RFC,v2,1/2] dt-bindings: clock: ti: Convert interface.txt to json-schema

Message ID 20241009205619.16250-2-andreas@kemnade.info
State Superseded
Headers show
Series dt-bindings: clock: ti: convert to yaml | expand

Commit Message

Andreas Kemnade Oct. 9, 2024, 8:56 p.m. UTC
Convert the OMAP interface clock device tree binding to json-schema.
Specify the creator of the original binding as a maintainer.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
 .../bindings/clock/ti/interface.txt           | 55 ---------------
 .../bindings/clock/ti/ti,interface-clock.yaml | 70 +++++++++++++++++++
 2 files changed, 70 insertions(+), 55 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/ti/interface.txt
 create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml

Comments

Rob Herring (Arm) Oct. 10, 2024, 3:34 a.m. UTC | #1
On Wed, Oct 09, 2024 at 10:56:18PM +0200, Andreas Kemnade wrote:
> Convert the OMAP interface clock device tree binding to json-schema.
> Specify the creator of the original binding as a maintainer.

Nice to see this! These are the top occurring undocumented (by schema) 
warnings for arm32.

> 
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> ---
>  .../bindings/clock/ti/interface.txt           | 55 ---------------
>  .../bindings/clock/ti/ti,interface-clock.yaml | 70 +++++++++++++++++++
>  2 files changed, 70 insertions(+), 55 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/ti/interface.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
> deleted file mode 100644
> index 85fb1f2d2d28..000000000000
> --- a/Documentation/devicetree/bindings/clock/ti/interface.txt
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -Binding for Texas Instruments interface clock.
> -
> -This binding uses the common clock binding[1]. This clock is
> -quite much similar to the basic gate-clock [2], however,
> -it supports a number of additional features, including
> -companion clock finding (match corresponding functional gate
> -clock) and hardware autoidle enable / disable.
> -
> -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
> -
> -Required properties:
> -- compatible : shall be one of:
> -  "ti,omap3-interface-clock" - basic OMAP3 interface clock
> -  "ti,omap3-no-wait-interface-clock" - interface clock which has no hardware
> -				       capability for waiting clock to be ready
> -  "ti,omap3-hsotgusb-interface-clock" - interface clock with USB specific HW
> -					handling
> -  "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling
> -  "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling
> -  "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling
> -  "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW
> -				  handling
> -- #clock-cells : from common clock binding; shall be set to 0
> -- clocks : link to phandle of parent clock
> -- reg : base address for the control register
> -
> -Optional properties:
> -- clock-output-names : from common clock binding.
> -- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
> -
> -Examples:
> -	aes1_ick: aes1_ick@48004a14 {
> -		#clock-cells = <0>;
> -		compatible = "ti,omap3-interface-clock";
> -		clocks = <&security_l4_ick2>;
> -		reg = <0x48004a14 0x4>;
> -		ti,bit-shift = <3>;
> -	};
> -
> -	cam_ick: cam_ick@48004f10 {
> -		#clock-cells = <0>;
> -		compatible = "ti,omap3-no-wait-interface-clock";
> -		clocks = <&l4_ick>;
> -		reg = <0x48004f10 0x4>;
> -		ti,bit-shift = <0>;
> -	};
> -
> -	ssi_ick_3430es2: ssi_ick_3430es2@48004a10 {
> -		#clock-cells = <0>;
> -		compatible = "ti,omap3-ssi-interface-clock";
> -		clocks = <&ssi_l4_ick>;
> -		reg = <0x48004a10 0x4>;
> -		ti,bit-shift = <0>;
> -	};
> diff --git a/Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml
> new file mode 100644
> index 000000000000..0e9542ed381f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/ti/ti,interface-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments interface clock.
> +
> +maintainers:
> +  - Tero Kristo <kristo@kernel.org>
> +
> +description: |
> +  This clock is quite much similar to the basic gate-clock[1], however,
> +  it supports a number of additional features, including
> +  companion clock finding (match corresponding functional gate
> +  clock) and hardware autoidle enable / disable.
> +
> +  [1] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,omap3-interface-clock           # basic OMAP3 interface clock
> +      - ti,omap3-no-wait-interface-clock   # interface clock which has no hardware
> +                                           # capability for waiting clock to be ready
> +      - ti,omap3-hsotgusb-interface-clock  # interface clock with USB specific HW handling
> +      - ti,omap3-dss-interface-clock       # interface clock with DSS specific HW handling
> +      - ti,omap3-ssi-interface-clock       # interface clock with SSI specific HW handling
> +      - ti,am35xx-interface-clock          # interface clock with AM35xx specific HW handling
> +      - ti,omap2430-interface-clock        # interface clock with OMAP2430 specific HW handling
> +
> +  "#clock-cells":
> +    const: 0
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-output-names:
> +    maxItems: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +  ti,bit-shift:
> +    description:
> +      bit shift for the bit enabling/disabling the clock
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 0

maximum: 31 ?

Otherwise,

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

> +
> +required:
> +  - compatible
> +  - clocks
> +  - '#clock-cells'
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    bus {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      aes1_ick: clock-controller@3 {
> +        #clock-cells = <0>;
> +        compatible = "ti,omap3-interface-clock";
> +        clocks = <&security_l4_ick2>;
> +        reg = <3>;
> +      };
> +    };
> -- 
> 2.39.5
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
deleted file mode 100644
index 85fb1f2d2d28..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ /dev/null
@@ -1,55 +0,0 @@ 
-Binding for Texas Instruments interface clock.
-
-This binding uses the common clock binding[1]. This clock is
-quite much similar to the basic gate-clock [2], however,
-it supports a number of additional features, including
-companion clock finding (match corresponding functional gate
-clock) and hardware autoidle enable / disable.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
-
-Required properties:
-- compatible : shall be one of:
-  "ti,omap3-interface-clock" - basic OMAP3 interface clock
-  "ti,omap3-no-wait-interface-clock" - interface clock which has no hardware
-				       capability for waiting clock to be ready
-  "ti,omap3-hsotgusb-interface-clock" - interface clock with USB specific HW
-					handling
-  "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling
-  "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling
-  "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling
-  "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW
-				  handling
-- #clock-cells : from common clock binding; shall be set to 0
-- clocks : link to phandle of parent clock
-- reg : base address for the control register
-
-Optional properties:
-- clock-output-names : from common clock binding.
-- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
-
-Examples:
-	aes1_ick: aes1_ick@48004a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x48004a14 0x4>;
-		ti,bit-shift = <3>;
-	};
-
-	cam_ick: cam_ick@48004f10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x48004f10 0x4>;
-		ti,bit-shift = <0>;
-	};
-
-	ssi_ick_3430es2: ssi_ick_3430es2@48004a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-ssi-interface-clock";
-		clocks = <&ssi_l4_ick>;
-		reg = <0x48004a10 0x4>;
-		ti,bit-shift = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml
new file mode 100644
index 000000000000..0e9542ed381f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,interface-clock.yaml
@@ -0,0 +1,70 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,interface-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments interface clock.
+
+maintainers:
+  - Tero Kristo <kristo@kernel.org>
+
+description: |
+  This clock is quite much similar to the basic gate-clock[1], however,
+  it supports a number of additional features, including
+  companion clock finding (match corresponding functional gate
+  clock) and hardware autoidle enable / disable.
+
+  [1] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
+
+properties:
+  compatible:
+    enum:
+      - ti,omap3-interface-clock           # basic OMAP3 interface clock
+      - ti,omap3-no-wait-interface-clock   # interface clock which has no hardware
+                                           # capability for waiting clock to be ready
+      - ti,omap3-hsotgusb-interface-clock  # interface clock with USB specific HW handling
+      - ti,omap3-dss-interface-clock       # interface clock with DSS specific HW handling
+      - ti,omap3-ssi-interface-clock       # interface clock with SSI specific HW handling
+      - ti,am35xx-interface-clock          # interface clock with AM35xx specific HW handling
+      - ti,omap2430-interface-clock        # interface clock with OMAP2430 specific HW handling
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  ti,bit-shift:
+    description:
+      bit shift for the bit enabling/disabling the clock
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      aes1_ick: clock-controller@3 {
+        #clock-cells = <0>;
+        compatible = "ti,omap3-interface-clock";
+        clocks = <&security_l4_ick2>;
+        reg = <3>;
+      };
+    };