From patchwork Wed Jun 14 18:04:19 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 692872 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id AC7C8C0015E for ; Wed, 14 Jun 2023 18:04:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234100AbjFNSEl (ORCPT ); Wed, 14 Jun 2023 14:04:41 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37398 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233096AbjFNSEj (ORCPT ); Wed, 14 Jun 2023 14:04:39 -0400 Received: from mail-lf1-x12e.google.com (mail-lf1-x12e.google.com [IPv6:2a00:1450:4864:20::12e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9F0172117 for ; Wed, 14 Jun 2023 11:04:36 -0700 (PDT) Received: by mail-lf1-x12e.google.com with SMTP id 2adb3069b0e04-4f4b2bc1565so9035640e87.2 for ; Wed, 14 Jun 2023 11:04:36 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1686765875; x=1689357875; h=cc:to:content-transfer-encoding:mime-version:message-id:date :subject:from:from:to:cc:subject:date:message-id:reply-to; bh=bog4gp9IhAVDvicWdI6GPIr4GVAQWTg0cHq5IKswNFk=; b=Cj+kfzZrrM/ZWqq4BcJF4oRr0xz8aECNTiha8VP6xM8nBur/+kL7C1O1pn11SBWwxx VLj0mH5B+XcgsOtbpMJIA9FRIq7T++hm0TK6/3maKHS2KnPBgEPY8WXhPRcwnljw3rCm UaALuKJSlLsTHlczaIxUXd2P/kMisBkJxN63bKrXdeolnXpoIUzbYqyB88umPHNUVLJc XbVOHMr9DVwz+vMZVbmg4AwhYgPGC1GFZSID2j16WHG2+er/QKY/BLJdaClykPXjTAV4 hJpWyTNMkTg9HELkMRL1/QG6/6yhp2De6o9AipeFDncEhl/rcJODtJhR9VAXsHaK4N3a Txag== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1686765875; x=1689357875; h=cc:to:content-transfer-encoding:mime-version:message-id:date :subject:from:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=bog4gp9IhAVDvicWdI6GPIr4GVAQWTg0cHq5IKswNFk=; b=Y8FS4DBk1wX1hAOMUKaLzySERSCjXPIPAZ8ILXl573UQZMFAcLSaqub03WAHaSuxIC 5kTfKHbXSLoqWFXpc57v+cMsZe/hIbw1ZnEy7z+4o81gr1ZEW1bLyMjjGCOl6CO8Hak3 h21TS08NoHalaii4rWCrsesazdhQOCpCxTEkYwz1ehCyZLn3+7OxQm8HE49C+RYjFj7E oPIGRoPBlstmMGq21ez1iHl7qacwajayuOCtrpc7Sg+oMKiKdX/gmiNqE8nWYUrmI3Bc AOJSvXl/8VtPw6l1J7HkouzJl9acXdRvo4UVfrk9C/OIhQzPkwiqP2Zp3bGGi5EI3v2n AcrA== X-Gm-Message-State: AC+VfDzeF6ChNeFxCurbedUMDxPFPHLfwy4wtPn1OjHJxq/nz6Se4KvI pjXM6pSwlmtJL3XCAG37AeEZFw== X-Google-Smtp-Source: ACHHUZ7axmEeaXNrGJVWIh8JHp3aZg1tJeDGzERk4LkPCA+q9ZmyjdjxZJoIQmV12vK+tAg3VJJSFg== X-Received: by 2002:a19:5f0e:0:b0:4f4:d83e:4141 with SMTP id t14-20020a195f0e000000b004f4d83e4141mr9350421lfb.50.1686765874578; Wed, 14 Jun 2023 11:04:34 -0700 (PDT) Received: from [192.168.1.101] (abyj190.neoplus.adsl.tpnet.pl. [83.9.29.190]) by smtp.gmail.com with ESMTPSA id l18-20020a19c212000000b004eff1f7f206sm2224053lfc.9.2023.06.14.11.04.33 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 14 Jun 2023 11:04:34 -0700 (PDT) From: Konrad Dybcio Subject: [PATCH v6 00/22] Restructure RPM SMD ICC Date: Wed, 14 Jun 2023 20:04:19 +0200 Message-Id: <20230526-topic-smd_icc-v6-0-263283111e66@linaro.org> MIME-Version: 1.0 X-B4-Tracking: v=1; b=H4sIACMBimQC/33PTWrDMBAF4KsErauif8td9R4lFI00igWuFKTUp ATfvXJ2xdTLN/C9mXmQhjVhI2+nB6m4pJZK7sG8nIifXL4gTaFnIpiQTAtDb+WaPG1f4TN5T8E KLkdlncZAugHXkEJ12U9d5e957sNrxZjuzyUf556n1G6l/jx3Lnyb/le/cMooh2jRGCO9wvc5Z VfLa6kXslUt4pCLzlGPUgEbguVyx+Uhl53rCEOQI9hBxR1Xh1xtHJwVYCKAEzuuD7nejkfn2Bg Ys+Lv7+u6/gIc6v//vAEAAA== To: Andy Gross , Bjorn Andersson , Michael Turquette , Stephen Boyd , Georgi Djakov , Leo Yan , Evan Green , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: Marijn Suijten , linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, Konrad Dybcio , Krzysztof Kozlowski , Dmitry Baryshkov , Stephan Gerhold X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1686765872; l=6624; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=G4+hKUovQ8Bf7Uod3WWsfrhuUqaphsYJEe+4h0gILuE=; b=il5VF/nWI+73x6ieMVF2AR8DQQaJa2w6T3+QYLzE6gXCwIsvcsuC6DuRQjgfze8r17qMidTk4 9y0Sh9Ov4cHDzc51wMDPNCZ9xdLGlTCapljYWNX/wxqrAonqdfsAK6+ X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org This series reshuffles things around, moving the management of SMD RPM bus clocks to the interconnect framework where they belong. This helps us solve a couple of issues: 1. We can work towards unused clk cleanup of RPMCC without worrying about it killing some NoC bus, resulting in the SoC dying. Deasserting actually unused RPM clocks (among other things) will let us achieve "true SoC-wide power collapse states", also known as VDD_LOW and VDD_MIN. 2. We no longer have to keep tons of quirky bus clock ifs in the icc driver. You either have a RPM clock and call "rpm set rate" or you have a single non-RPM clock (like AHB_CLK_SRC) or you don't have any. 3. There's less overhead - instead of going through layers and layers of the CCF, ratesetting comes down to calling max() and sending a single RPM message. ICC is very very dynamic so that's a big plus. The clocks still need to be vaguely described in the clk-smd-rpm driver, as it gives them an initial kickoff, before actually telling RPM to enable DVFS scaling. After RPM receives that command, all clocks that have not been assigned a rate are considered unused and are shut down in hardware, leading to the same issue as described in point 1. We can consider marking them __initconst in the future, but this series is very fat even without that.. Apart from that, it squashes a couple of bugs that really need fixing.. --- MERGING STRATEGY --- If Stephen and Georgi agree, it would be best to take all of this through the qcom tree, as it touches on heavily intertwined components and introduces compile-time dependencies between icc and clk drivers. Tested on SM6375 (OOT), MSM8998 (OOT), MSM8996. MSM8974 conversion to common code and modernization will be handled separately. Signed-off-by: Konrad Dybcio --- Changes in v6: - Fix argument naming in "Add rpmcc handling skeleton code" - Fix missing clk.h and reorder patch "Add missing headers in icc-rpm.h", drop Dmitry's rb - Pick up tags - Link to v5: https://lore.kernel.org/r/20230526-topic-smd_icc-v5-0-eeaa09d0082e@linaro.org Changes in v5: - Pass RPM context id to qcom_icc_rpm_set_bus_rate() - Fix min_t call cutting off bits 32-63 in set() path - Pick up tags - Link to v4: https://lore.kernel.org/r/20230526-topic-smd_icc-v4-0-5ba82b6fbba2@linaro.org Changes in v4: - Only set clk rate on a context if necessary - Mention qcom,icc.h is not the correct header in "Control bus rpmcc form icc" - Fix the bindings (BIT vs 1<<) - Fix one more wrong use of qcom,icc.h in "Fix bucket numer" and uninclude it - Drop "Allow negative QoS offset" (will be handled separately) - Export icc clocks descriptions to unbreak =m builds - Pick up tags - Link to v3: https://lore.kernel.org/r/20230526-topic-smd_icc-v3-0-5fb7d39b874f@linaro.org Changes in v3: - Use devm_clk_get_optional and only get() the clock once - Drop unnecessary NULL-checks for qp->bus_clk - Handle ARM32 CCF limitations, add an explicit comment about them - Use Stephan's alternative rpmcc readiness check - Fix one more wrong usage of QCOM_ICC_NUM_BUCKETS in icc-rpm.h - Introduce new dt-bindings for icc rpm tags - Mention the rpm tags situation in the commit message of "Fix bucket number" - Pick up tags - Link to v2: https://lore.kernel.org/r/20230526-topic-smd_icc-v2-0-e5934b07d813@linaro.org Changes in v2: - Sort entries properly in "Add missing headers in icc-rpm.h" - Fix the check for no clocks on a given provider - Replace "Divide clk rate by src node bus width" with a proper fix - Add "Set correct bandwidth through RPM bw req" - Split "Add QCOM_SMD_RPM_STATE_NUM" into 2 logical changes - Move "Separate out interconnect bus clocks" a bit later in the series - Link to v1: https://lore.kernel.org/r/20230526-topic-smd_icc-v1-0-1bf8e6663c4e@linaro.org --- Konrad Dybcio (21): dt-bindings: interconnect: Add Qcom RPM ICC bindings soc: qcom: smd-rpm: Add QCOM_SMD_RPM_STATE_NUM soc: qcom: smd-rpm: Use tabs for defines clk: qcom: smd-rpm: Move some RPM resources to the common header interconnect: qcom: icc-rpm: Introduce keep_alive interconnect: qcom: Add missing headers in icc-rpm.h interconnect: qcom: Fold smd-rpm.h into icc-rpm.h interconnect: qcom: smd-rpm: Add rpmcc handling skeleton code interconnect: qcom: Define RPM bus clocks interconnect: qcom: sdm660: Hook up RPM bus clk definitions interconnect: qcom: msm8996: Hook up RPM bus clk definitions interconnect: qcom: qcs404: Hook up RPM bus clk definitions interconnect: qcom: msm8939: Hook up RPM bus clk definitions interconnect: qcom: msm8916: Hook up RPM bus clk definitions interconnect: qcom: qcm2290: Hook up RPM bus clk definitions interconnect: qcom: icc-rpm: Control bus rpmcc from icc clk: qcom: smd-rpm: Separate out interconnect bus clocks interconnect: qcom: icc-rpm: Fix bucket number interconnect: qcom: icc-rpm: Set bandwidth on both contexts interconnect: qcom: icc-rpm: Set correct bandwidth through RPM bw req interconnect: qcom: icc-rpm: Fix bandwidth calculations Stephan Gerhold (1): soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm drivers/clk/qcom/clk-smd-rpm.c | 312 +++++++++++------------- drivers/interconnect/qcom/Makefile | 2 +- drivers/interconnect/qcom/icc-rpm-clocks.c | 77 ++++++ drivers/interconnect/qcom/icc-rpm.c | 220 +++++++++-------- drivers/interconnect/qcom/icc-rpm.h | 56 ++++- drivers/interconnect/qcom/msm8916.c | 5 +- drivers/interconnect/qcom/msm8939.c | 6 +- drivers/interconnect/qcom/msm8974.c | 2 +- drivers/interconnect/qcom/msm8996.c | 10 +- drivers/interconnect/qcom/qcm2290.c | 8 +- drivers/interconnect/qcom/qcs404.c | 5 +- drivers/interconnect/qcom/sdm660.c | 8 +- drivers/interconnect/qcom/smd-rpm.c | 23 +- drivers/interconnect/qcom/smd-rpm.h | 15 -- drivers/soc/qcom/smd-rpm.c | 17 +- include/dt-bindings/interconnect/qcom,rpm-icc.h | 13 + include/linux/soc/qcom/smd-rpm.h | 20 +- 17 files changed, 455 insertions(+), 344 deletions(-) --- base-commit: b16049b21162bb649cdd8519642a35972b7910fe change-id: 20230526-topic-smd_icc-b8213948a5ed Best regards,