Show patches with: Submitter = Konrad Dybcio       |    Archived = No       |   505 patches
« 1 2 3 4 … 5 6 »
Patch Series S/W/F Date Submitter Delegate State
[4/4] interconnect: qcom: icc-rpm: Remodel how QoS settings are stored Rework rpm-icc QoS settings --- 2024-03-26 Konrad Dybcio New
[3/4] interconnect: qcom: icc-rpm: Make simple functions return void Rework rpm-icc QoS settings --- 2024-03-26 Konrad Dybcio New
[2/4] interconnect: qcom: qcm2290: Fix mas_snoc_bimc QoS port assignment Rework rpm-icc QoS settings --- 2024-03-26 Konrad Dybcio Accepted
[1/4] interconnect: qcom: sm6115: Unspaghettify SNoC QoS port numbering Rework rpm-icc QoS settings --- 2024-03-26 Konrad Dybcio Accepted
[v2,3/3] arm64: dts: qcom: qcm2290: Add LMH node QCM2290 LMH --- 2024-03-09 Konrad Dybcio Superseded
[v2,2/3] thermal: qcom: lmh: Check for SCM availability at probe QCM2290 LMH --- 2024-03-09 Konrad Dybcio Accepted
[v2,1/3] dt-bindings: thermal: lmh: Add QCM2290 compatible QCM2290 LMH --- 2024-03-09 Konrad Dybcio Superseded
[3/3] arm64: dts: qcom: qcm2290: Add LMH node QCM2290 LMH --- 2024-03-08 Konrad Dybcio New
[2/3] thermal: qcom: lmh: Check for SCM avaiability at probe QCM2290 LMH --- 2024-03-08 Konrad Dybcio Superseded
[1/3] dt-bindings: thermal: lmh: Add QCM2290 compatible QCM2290 LMH --- 2024-03-08 Konrad Dybcio Accepted
interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM --- 2024-03-02 Konrad Dybcio Accepted
[2/2] thermal/of: Assume polling-delay(-passive) 0 when absent Assume polling-delay(-passive) = 0 when absent --- 2024-01-25 Konrad Dybcio Accepted
[1/2] dt-bindings: thermal-zones: Don't require polling-delay(-passive) Assume polling-delay(-passive) = 0 when absent --- 2024-01-25 Konrad Dybcio Accepted
[3/4] arm64: dts: qcom: x1e80100: Add missing system-wide PSCI power domain [1/4] interconnect: qcom: x1e80100: Remove bogus per-RSC BCMs and nodes --- 2024-01-02 Konrad Dybcio Accepted
[1/4] interconnect: qcom: x1e80100: Remove bogus per-RSC BCMs and nodes [1/4] interconnect: qcom: x1e80100: Remove bogus per-RSC BCMs and nodes --- 2024-01-02 Konrad Dybcio Accepted
pmdomain: core: Move the unused cleanup to a _sync initcall pmdomain: core: Move the unused cleanup to a _sync initcall --- 2023-12-27 Konrad Dybcio Accepted
[11/12] arm64: dts: qcom: sm8550: Separate out X3 idle state [01/12] interconnect: qcom: sm8550: Remove bogus per-RSC BCMs and nodes --- 2023-12-18 Konrad Dybcio Accepted
[09/12] clk: qcom: dispcc-sm8550: Use the correct PLL configuration function [01/12] interconnect: qcom: sm8550: Remove bogus per-RSC BCMs and nodes --- 2023-12-18 Konrad Dybcio Accepted
[06/12] clk: qcom: gcc-sm8550: Mark RCGs shared where applicable [01/12] interconnect: qcom: sm8550: Remove bogus per-RSC BCMs and nodes --- 2023-12-18 Konrad Dybcio Accepted
[05/12] clk: qcom: gcc-sm8550: use collapse-voting for PCIe GDSCs [01/12] interconnect: qcom: sm8550: Remove bogus per-RSC BCMs and nodes --- 2023-12-18 Konrad Dybcio Accepted
[03/12] clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag [01/12] interconnect: qcom: sm8550: Remove bogus per-RSC BCMs and nodes --- 2023-12-18 Konrad Dybcio Accepted
[01/12] interconnect: qcom: sm8550: Remove bogus per-RSC BCMs and nodes [01/12] interconnect: qcom: sm8550: Remove bogus per-RSC BCMs and nodes --- 2023-12-18 Konrad Dybcio Accepted
[RFC] power: supply: qcom_battmgr: Register the power supplies after PDR is up [RFC] power: supply: qcom_battmgr: Register the power supplies after PDR is up --- 2023-12-18 Konrad Dybcio Accepted
interconnect: qcom: sm6115: Fix up includes interconnect: qcom: sm6115: Fix up includes --- 2023-12-14 Konrad Dybcio Accepted
[6/6] arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting SC8180X fixes --- 2023-12-14 Konrad Dybcio Accepted
[5/6] arm64: dts: qcom: sc8180x: Describe the GIC redistributor SC8180X fixes --- 2023-12-14 Konrad Dybcio Accepted
[4/6] arm64: dts: qcom: sc8180x: Add interconnects to UFS SC8180X fixes --- 2023-12-14 Konrad Dybcio Accepted
[3/6] arm64: dts: qcom: sc8180x: Add missing MDP clocks SC8180X fixes --- 2023-12-14 Konrad Dybcio Accepted
[2/6] arm64: dts: qcom: sc8180x: Add UFS GDSC SC8180X fixes --- 2023-12-14 Konrad Dybcio Accepted
[1/6] interconnect: qcom: sc8180x: Mark CO0 BCM keepalive SC8180X fixes --- 2023-12-14 Konrad Dybcio Accepted
[1/2] dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM6115 bwmon instance [1/2] dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM6115 bwmon instance --- 2023-12-11 Konrad Dybcio Accepted
interconnect: qcom: sm8250: Enable sync_state interconnect: qcom: sm8250: Enable sync_state --- 2023-11-30 Konrad Dybcio Accepted
[v3,12/12] arm64: dts: qcom: qrb2210-rb1: add wifi variant property RB1/QCM2290 features --- 2023-11-29 Konrad Dybcio Superseded
[v3,11/12] arm64: dts: qcom: qrb2210-rb1: Enable CAN bus controller RB1/QCM2290 features --- 2023-11-29 Konrad Dybcio Accepted
[v3,10/12] arm64: dts: qcom: qrb2210-rb1: Set up HDMI RB1/QCM2290 features --- 2023-11-29 Konrad Dybcio Accepted
[v3,09/12] arm64: dts: qcom: qcm2290: Hook up interconnects RB1/QCM2290 features --- 2023-11-29 Konrad Dybcio Superseded
[v3,08/12] arm64: dts: qcom: qcm2290: Add display nodes RB1/QCM2290 features --- 2023-11-29 Konrad Dybcio Superseded
[v3,07/12] arm64: dts: qcom: sc7280: Add the missing MDSS icc path RB1/QCM2290 features --- 2023-11-29 Konrad Dybcio Accepted
[v3,06/12] arm64: dts: qcom: sc7180: Add the missing MDSS icc path RB1/QCM2290 features --- 2023-11-29 Konrad Dybcio Superseded
[v3,05/12] iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible RB1/QCM2290 features --- 2023-11-29 Konrad Dybcio Accepted
[v3,04/12] dt-bindings: firmware: qcom,scm: Allow interconnect for everyone RB1/QCM2290 features --- 2023-11-29 Konrad Dybcio Superseded
[v3,03/12] dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance RB1/QCM2290 features --- 2023-11-29 Konrad Dybcio Accepted
[v3,02/12] dt-bindings: display: msm: Add reg bus and rotator interconnects RB1/QCM2290 features --- 2023-11-29 Konrad Dybcio Superseded
[v3,01/12] dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat RB1/QCM2290 features --- 2023-11-29 Konrad Dybcio Accepted
[v3,2/2] interconnect: qcom: Add SM6115 interconnect provider driver SM6115 interconnect --- 2023-11-29 Konrad Dybcio Superseded
[v3,1/2] dt-bindings: interconnect: Add Qualcomm SM6115 NoC SM6115 interconnect --- 2023-11-29 Konrad Dybcio Accepted
[v2,12/12] arm64: dts: qcom: qrb2210-rb1: add wifi variant property RB1/QCM2290 features --- 2023-11-27 Konrad Dybcio New
[v2,11/12] arm64: dts: qcom: qrb2210-rb1: Enable CAN bus controller RB1/QCM2290 features --- 2023-11-27 Konrad Dybcio Superseded
[v2,10/12] arm64: dts: qcom: qrb2210-rb1: Set up HDMI RB1/QCM2290 features --- 2023-11-27 Konrad Dybcio Superseded
[v2,09/12] arm64: dts: qcom: qcm2290: Hook up interconnects RB1/QCM2290 features --- 2023-11-27 Konrad Dybcio Accepted
[v2,08/12] arm64: dts: qcom: qcm2290: Add display nodes RB1/QCM2290 features --- 2023-11-27 Konrad Dybcio Accepted
[v2,07/12] arm64: dts: qcom: sc7280: Add the missing MDSS icc path RB1/QCM2290 features --- 2023-11-27 Konrad Dybcio Superseded
[v2,06/12] arm64: dts: qcom: sc7180: Add the missing MDSS icc path RB1/QCM2290 features --- 2023-11-27 Konrad Dybcio Accepted
[v2,05/12] iommu/arm-smmu-qcom: Add QCM2290 DPU compatible RB1/QCM2290 features --- 2023-11-27 Konrad Dybcio Superseded
[v2,04/12] dt-bindings: firmware: qcom,scm: Allow interconnect for everyone RB1/QCM2290 features --- 2023-11-27 Konrad Dybcio Accepted
[v2,03/12] dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance RB1/QCM2290 features --- 2023-11-27 Konrad Dybcio Superseded
[v2,02/12] dt-bindings: display: msm: Add reg bus and rotator interconnects RB1/QCM2290 features --- 2023-11-27 Konrad Dybcio Accepted
[v2,01/12] dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat RB1/QCM2290 features --- 2023-11-27 Konrad Dybcio Superseded
[v2,2/2] interconnect: qcom: Add SM6115 interconnect provider driver SM6115 interconnect --- 2023-11-27 Konrad Dybcio Accepted
[v2,1/2] dt-bindings: interconnect: Add Qualcomm SM6115 NoC SM6115 interconnect --- 2023-11-27 Konrad Dybcio Superseded
[2/2] interconnect: qcom: Add SM6115 interconnect provider driver SM6115 interconnect --- 2023-11-25 Konrad Dybcio Superseded
[1/2] dt-bindings: interconnect: Add Qualcomm SM6115 NoC SM6115 interconnect --- 2023-11-25 Konrad Dybcio Superseded
[12/12] arm64: dts: qcom: qrb2210-rb1: add wifi variant property RB1/QCM2290 features --- 2023-11-25 Konrad Dybcio Superseded
[11/12] arm64: dts: qcom: qrb2210-rb1: Enable CAN bus controller RB1/QCM2290 features --- 2023-11-25 Konrad Dybcio Superseded
[10/12] arm64: dts: qcom: qrb2210-rb1: Set up HDMI RB1/QCM2290 features --- 2023-11-25 Konrad Dybcio Superseded
[09/12] arm64: dts: qcom: qcm2290: Hook up interconnects RB1/QCM2290 features --- 2023-11-25 Konrad Dybcio Superseded
[08/12] arm64: dts: qcom: qcm2290: Add display nodes RB1/QCM2290 features --- 2023-11-25 Konrad Dybcio Superseded
[07/12] iommu/arm-smmu-qcom: Add QCM2290 DPU compatible RB1/QCM2290 features --- 2023-11-25 Konrad Dybcio Superseded
[06/12] dt-bindings: firmware: qcom,scm: Allow interconnect for everyone RB1/QCM2290 features --- 2023-11-25 Konrad Dybcio Superseded
[05/12] dt-bindings: interconnect: qcom,msm8998-bwmon: Add QCM2290 bwmon instance RB1/QCM2290 features --- 2023-11-25 Konrad Dybcio Superseded
[04/12] dt-bindings: display: msm: sm8450-mdss: Allow 3 interconnects RB1/QCM2290 features --- 2023-11-25 Konrad Dybcio New
[03/12] dt-bindings: display: msm: qcm2290-mdss: Allow 2 interconnects RB1/QCM2290 features --- 2023-11-25 Konrad Dybcio New
[02/12] dt-bindings: display: msm: Add reg bus and rotator interconnects RB1/QCM2290 features --- 2023-11-25 Konrad Dybcio New
[01/12] dt-bindings: display: msm: qcm2290-mdss: Use the non-deprecated DSI compat RB1/QCM2290 features --- 2023-11-25 Konrad Dybcio New
psy: mm8013: Add more properties psy: mm8013: Add more properties --- 2023-09-16 Konrad Dybcio Accepted
[v4,3/3] power: supply: Introduce MM8013 fuel gauge driver MM8013 fg driver --- 2023-09-15 Konrad Dybcio Accepted
[v4,2/3] dt-bindings: power: supply: Document Mitsumi MM8013 fuel gauge MM8013 fg driver --- 2023-09-15 Konrad Dybcio Accepted
[v4,1/3] dt-bindings: vendor-prefixes: Add Mitsumi Electric Co., Ltd. MM8013 fg driver --- 2023-09-15 Konrad Dybcio Accepted
[v3,3/3] power: supply: Introduce MM8013 fuel gauge driver MM8013 fg driver --- 2023-09-13 Konrad Dybcio New
[v3,2/3] dt-bindings: power: supply: Document Mitsumi MM8013 fuel gauge MM8013 fg driver --- 2023-09-13 Konrad Dybcio Superseded
[v3,1/3] dt-bindings: vendor-prefixes: Add Mitsumi Electric Co., Ltd. MM8013 fg driver --- 2023-09-13 Konrad Dybcio Superseded
[v14,9/9] arm64: dts: qcom: msm8998: Configure CPRh Add support for Core Power Reduction v3, v4 and Hardened --- 2023-08-28 Konrad Dybcio New
[v14,8/9] soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened Add support for Core Power Reduction v3, v4 and Hardened --- 2023-08-28 Konrad Dybcio New
[v14,7/9] soc: qcom: cpr-common: Add threads support Add support for Core Power Reduction v3, v4 and Hardened --- 2023-08-28 Konrad Dybcio New
[v14,6/9] soc: qcom: cpr: Use u64 for frequency Add support for Core Power Reduction v3, v4 and Hardened --- 2023-08-28 Konrad Dybcio New
[v14,5/9] soc: qcom: cpr-common: Add support for flat fuse adjustment Add support for Core Power Reduction v3, v4 and Hardened --- 2023-08-28 Konrad Dybcio New
[v14,4/9] soc: qcom: cpr: Move common functions to new file Add support for Core Power Reduction v3, v4 and Hardened --- 2023-08-28 Konrad Dybcio New
[v14,3/9] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver Add support for Core Power Reduction v3, v4 and Hardened --- 2023-08-28 Konrad Dybcio New
[v14,2/9] dt-bindings: opp: v2-qcom-level: Document CPR3 open/closed loop volt adjustment Add support for Core Power Reduction v3, v4 and Hardened --- 2023-08-28 Konrad Dybcio New
[v14,1/9] MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver Add support for Core Power Reduction v3, v4 and Hardened --- 2023-08-28 Konrad Dybcio New
[v4,10/10] clk: qcom: smd-rpm: Move CPUSS_GNoC clock to interconnect Fix up icc clock rate calculation on some platforms --- 2023-08-25 Konrad Dybcio Accepted
[v4,09/10] interconnect: qcom: msm8996: Set AB/IB coefficients Fix up icc clock rate calculation on some platforms --- 2023-08-25 Konrad Dybcio Accepted
[v4,08/10] interconnect: qcom: sdm660: Set AB/IB coefficients Fix up icc clock rate calculation on some platforms --- 2023-08-25 Konrad Dybcio Accepted
[v4,07/10] interconnect: qcom: qcm2290: Update EBI channel configuration Fix up icc clock rate calculation on some platforms --- 2023-08-25 Konrad Dybcio Accepted
[v4,06/10] interconnect: qcom: qcm2290: Set AB coefficients Fix up icc clock rate calculation on some platforms --- 2023-08-25 Konrad Dybcio Accepted
[v4,05/10] interconnect: qcom: qcm2290: Hook up MAS_APPS_PROC's bus clock Fix up icc clock rate calculation on some platforms --- 2023-08-25 Konrad Dybcio Accepted
[v4,04/10] interconnect: qcom: icc-rpm: Check for node-specific rate coefficients Fix up icc clock rate calculation on some platforms --- 2023-08-25 Konrad Dybcio Accepted
[v4,03/10] interconnect: qcom: icc-rpm: Let nodes drive their own bus clock Fix up icc clock rate calculation on some platforms --- 2023-08-25 Konrad Dybcio Accepted
[v4,02/10] interconnect: qcom: icc-rpm: Separate out clock rate calulcations Fix up icc clock rate calculation on some platforms --- 2023-08-25 Konrad Dybcio Accepted
[v4,01/10] interconnect: qcom: icc-rpm: Add AB/IB calculations coefficients Fix up icc clock rate calculation on some platforms --- 2023-08-25 Konrad Dybcio Accepted
« 1 2 3 4 … 5 6 »