diff mbox series

[v2,27/32] iio/drivers/sun4i_gpadc: Switch to new of thermal API

Message ID 20220725212637.2818207-28-daniel.lezcano@linexp.org
State Superseded
Headers show
Series New thermal OF code | expand

Commit Message

Daniel Lezcano July 25, 2022, 9:26 p.m. UTC
The thermal OF code has a new API allowing to migrate the OF
initialization to a simpler approach. The ops are no longer device
tree specific and are the generic ones provided by the core code.

Convert the ops to the thermal_zone_device_ops format and use the new
API to register the thermal zone with these generic ops.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
---
 drivers/iio/adc/sun4i-gpadc-iio.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 2d393a4dfff6..13d1e937357c 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -412,9 +412,9 @@  static int sun4i_gpadc_runtime_resume(struct device *dev)
 	return 0;
 }
 
-static int sun4i_gpadc_get_temp(void *data, int *temp)
+static int sun4i_gpadc_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct sun4i_gpadc_iio *info = data;
+	struct sun4i_gpadc_iio *info = tz->devdata;
 	int val, scale, offset;
 
 	if (sun4i_gpadc_temp_read(info->indio_dev, &val))
@@ -428,7 +428,7 @@  static int sun4i_gpadc_get_temp(void *data, int *temp)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops sun4i_ts_tz_ops = {
+static const struct thermal_zone_device_ops sun4i_ts_tz_ops = {
 	.get_temp = &sun4i_gpadc_get_temp,
 };
 
@@ -637,9 +637,9 @@  static int sun4i_gpadc_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 
 	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
-		info->tzd = thermal_zone_of_sensor_register(info->sensor_device,
-							    0, info,
-							    &sun4i_ts_tz_ops);
+		info->tzd = thermal_of_zone_register(info->sensor_device,
+						     0, info,
+						     &sun4i_ts_tz_ops);
 		/*
 		 * Do not fail driver probing when failing to register in
 		 * thermal because no thermal DT node is found.