diff mbox series

[1/2] thermal: rockchip: Support RK3588 SoC in the thermal driver

Message ID 20221021174721.92468-2-sebastian.reichel@collabora.com
State New
Headers show
Series RK3588 Thermal Support | expand

Commit Message

Sebastian Reichel Oct. 21, 2022, 5:47 p.m. UTC
From: Finley Xiao <finley.xiao@rock-chips.com>

The RK3588 SoC has seven channels TS-ADC(TOP, BIG_CORE0, BIG_CORE1,
LITTEL_CORE, CENTER, GPU, and NPU).

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
[rebase, squash fixes]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/thermal/rockchip_thermal.c | 182 ++++++++++++++++++++++++++++-
 1 file changed, 179 insertions(+), 3 deletions(-)

Comments

Heiko Stübner Oct. 21, 2022, 7:12 p.m. UTC | #1
Am Freitag, 21. Oktober 2022, 19:47:20 CEST schrieb Sebastian Reichel:
> From: Finley Xiao <finley.xiao@rock-chips.com>
> 
> The RK3588 SoC has seven channels TS-ADC(TOP, BIG_CORE0, BIG_CORE1,
> LITTEL_CORE, CENTER, GPU, and NPU).
> 
> Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
> [rebase, squash fixes]
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Daniel Lezcano Oct. 21, 2022, 7:59 p.m. UTC | #2
On 21/10/2022 19:47, Sebastian Reichel wrote:
> From: Finley Xiao <finley.xiao@rock-chips.com>
> 
> The RK3588 SoC has seven channels TS-ADC(TOP, BIG_CORE0, BIG_CORE1,
> LITTEL_CORE, CENTER, GPU, and NPU).

Is possible to give a more elaborate description of those sensors?

What is TOP and CENTER ?

There are 4 Bigs on this platform but two sensors ?


> Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
> [rebase, squash fixes]
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>   drivers/thermal/rockchip_thermal.c | 182 ++++++++++++++++++++++++++++-
>   1 file changed, 179 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> index 819e059cde71..82f475a6448f 100644
> --- a/drivers/thermal/rockchip_thermal.c
> +++ b/drivers/thermal/rockchip_thermal.c
> @@ -61,10 +61,9 @@ enum adc_sort_mode {
>   #include "thermal_hwmon.h"
>   
>   /**
> - * The max sensors is two in rockchip SoCs.
> - * Two sensors: CPU and GPU sensor.
> + * The max sensors is seven in rockchip SoCs.
>    */
> -#define SOC_MAX_SENSORS	2
> +#define SOC_MAX_SENSORS	7

You may get rid of this and replace the sensors array to an dyn 
allocation based on chn_num

[ ... ]

> +static const struct rockchip_tsadc_chip rk3588_tsadc_data = {
> +	/* top, big_core0, big_core1, little_core, center, gpu, npu */
> +	.chn_id = {0, 1, 2, 3, 4, 5, 6},

You may want to revisit that. Actually, chn_id is not useful and can be 
removed everywhere as there is no hole. Otherwise a bit mask could be 
used. By removing it, SENSOR_CPU and SENSOR_GPU can be removed too.

> +	.chn_num = 7, /* seven channels for tsadc
> +	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> +	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> +	.tshut_temp = 95000,
> +	.initialize = rk_tsadcv8_initialize,
> +	.irq_ack = rk_tsadcv4_irq_ack,
> +	.control = rk_tsadcv4_control,
> +	.get_temp = rk_tsadcv4_get_temp,
> +	.set_alarm_temp = rk_tsadcv3_alarm_temp,
> +	.set_tshut_temp = rk_tsadcv3_tshut_temp,
> +	.set_tshut_mode = rk_tsadcv3_tshut_mode,
> +	.table = {
> +		.id = rk3588_code_table,
> +		.length = ARRAY_SIZE(rk3588_code_table),
> +		.data_mask = TSADCV4_DATA_MASK,
> +		.mode = ADC_INCREMENT,
> +	},
> +};
> +
>   static const struct of_device_id of_rockchip_thermal_match[] = {
>   	{	.compatible = "rockchip,px30-tsadc",
>   		.data = (void *)&px30_tsadc_data,
> @@ -1180,6 +1352,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = {
>   		.compatible = "rockchip,rk3568-tsadc",
>   		.data = (void *)&rk3568_tsadc_data,
>   	},
> +	{
> +		.compatible = "rockchip,rk3588-tsadc",
> +		.data = (void *)&rk3588_tsadc_data,
> +	},
>   	{ /* end */ },
>   };
>   MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
Nicolas Frattaroli Oct. 22, 2022, 8:43 a.m. UTC | #3
On Freitag, 21. Oktober 2022 21:59:56 CEST Daniel Lezcano wrote:
> On 21/10/2022 19:47, Sebastian Reichel wrote:
> > From: Finley Xiao <finley.xiao@rock-chips.com>
> > 
> > The RK3588 SoC has seven channels TS-ADC(TOP, BIG_CORE0, BIG_CORE1,
> > LITTEL_CORE, CENTER, GPU, and NPU).
> 
> Is possible to give a more elaborate description of those sensors?
> 
> What is TOP and CENTER ?
> 
> There are 4 Bigs on this platform but two sensors ?

As far as I know, the four big cores in the SoC are arranged in two
clusters of two cores each, so one temperature sensor for each
cluster. As far as I can tell each CPU in a cluster shares its voltage
with its partner CPU core in its cluster.

If you have access to the TRM, it contains the following line in
part 1 on page 1372:

	Support to 7 channel TS-ADC (near chip center, A76_0/1, A76_2/3,
	DSU and A55_0/1/2/3, PD_CENTER, NPU, GPU)

I assume one of "TOP" and "CENTER" is "near chip center", the other is
PD_CENTER, whatever that means (PD = power domain maybe?)

I agree these could be named more descriptively.

> 
> 
> > Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
> > [rebase, squash fixes]
> > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> > ---
> >   drivers/thermal/rockchip_thermal.c | 182 ++++++++++++++++++++++++++++-
> >   1 file changed, 179 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> > index 819e059cde71..82f475a6448f 100644
> > --- a/drivers/thermal/rockchip_thermal.c
> > +++ b/drivers/thermal/rockchip_thermal.c
> > @@ -61,10 +61,9 @@ enum adc_sort_mode {
> >   #include "thermal_hwmon.h"
> >   
> >   /**
> > - * The max sensors is two in rockchip SoCs.
> > - * Two sensors: CPU and GPU sensor.
> > + * The max sensors is seven in rockchip SoCs.
> >    */
> > -#define SOC_MAX_SENSORS	2
> > +#define SOC_MAX_SENSORS	7
> 
> You may get rid of this and replace the sensors array to an dyn 
> allocation based on chn_num
> 
> [ ... ]
> 
> > +static const struct rockchip_tsadc_chip rk3588_tsadc_data = {
> > +	/* top, big_core0, big_core1, little_core, center, gpu, npu */
> > +	.chn_id = {0, 1, 2, 3, 4, 5, 6},
> 
> You may want to revisit that. Actually, chn_id is not useful and can be 
> removed everywhere as there is no hole. Otherwise a bit mask could be 
> used. By removing it, SENSOR_CPU and SENSOR_GPU can be removed too.
> 
> > +	.chn_num = 7, /* seven channels for tsadc
> > +	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> > +	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> > +	.tshut_temp = 95000,
> > +	.initialize = rk_tsadcv8_initialize,
> > +	.irq_ack = rk_tsadcv4_irq_ack,
> > +	.control = rk_tsadcv4_control,
> > +	.get_temp = rk_tsadcv4_get_temp,
> > +	.set_alarm_temp = rk_tsadcv3_alarm_temp,
> > +	.set_tshut_temp = rk_tsadcv3_tshut_temp,
> > +	.set_tshut_mode = rk_tsadcv3_tshut_mode,
> > +	.table = {
> > +		.id = rk3588_code_table,
> > +		.length = ARRAY_SIZE(rk3588_code_table),
> > +		.data_mask = TSADCV4_DATA_MASK,
> > +		.mode = ADC_INCREMENT,
> > +	},
> > +};
> > +
> >   static const struct of_device_id of_rockchip_thermal_match[] = {
> >   	{	.compatible = "rockchip,px30-tsadc",
> >   		.data = (void *)&px30_tsadc_data,
> > @@ -1180,6 +1352,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = {
> >   		.compatible = "rockchip,rk3568-tsadc",
> >   		.data = (void *)&rk3568_tsadc_data,
> >   	},
> > +	{
> > +		.compatible = "rockchip,rk3588-tsadc",
> > +		.data = (void *)&rk3588_tsadc_data,
> > +	},
> >   	{ /* end */ },
> >   };
> >   MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
> 
> 
>
Daniel Lezcano Oct. 22, 2022, 11:12 a.m. UTC | #4
On 22/10/2022 10:43, Nicolas Frattaroli wrote:

[ ... ]

>> What is TOP and CENTER ?
>>
>> There are 4 Bigs on this platform but two sensors ?
> 
> As far as I know, the four big cores in the SoC are arranged in two
> clusters of two cores each, so one temperature sensor for each
> cluster. As far as I can tell each CPU in a cluster shares its voltage
> with its partner CPU core in its cluster.

Ok, I found some more details on the datasheet, page 7-8.

So it is a big "Cluster" with the 4 Big cores. They share the same cache.

There is one power domain per core (cpuidle)

There are two performance domains (cpufreq x 2)

So it makes sense to have one sensor per performance domain to mitigate 
the temperature.

> If you have access to the TRM, it contains the following line in
> part 1 on page 1372:

Unfortunately no, I don't have access to the TRM. But I'll be happy if I 
can ;)

> 	Support to 7 channel TS-ADC (near chip center, A76_0/1, A76_2/3,
> 	DSU and A55_0/1/2/3, PD_CENTER, NPU, GPU)
> 
> I assume one of "TOP" and "CENTER" is "near chip center", the other is
> PD_CENTER, whatever that means (PD = power domain maybe?)

Yes certainly.

I take the opportunity to let you know there is a new tool in the linux 
tools directory called 'thermometer'. You can capture the temperature 
and use the data to create graphics.

> I agree these could be named more descriptively.
>
Sebastian Reichel Oct. 22, 2022, 6:18 p.m. UTC | #5
Hi,

On Sat, Oct 22, 2022 at 01:12:22PM +0200, Daniel Lezcano wrote:
> > If you have access to the TRM, it contains the following line in
> > part 1 on page 1372:
> 
> Unfortunately no, I don't have access to the TRM. But I'll be happy if I can
> ;)

The RK3588 TRM is available under datasheets on this page:

https://wiki.radxa.com/Rock5/hardware

> > 	Support to 7 channel TS-ADC (near chip center, A76_0/1, A76_2/3,
> > 	DSU and A55_0/1/2/3, PD_CENTER, NPU, GPU)
> > 
> > I assume one of "TOP" and "CENTER" is "near chip center", the other is
> > PD_CENTER, whatever that means (PD = power domain maybe?)
> 
> Yes certainly.
> 
> I take the opportunity to let you know there is a new tool in the linux
> tools directory called 'thermometer'. You can capture the temperature and
> use the data to create graphics.

nice :)

-- Sebastian
diff mbox series

Patch

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 819e059cde71..82f475a6448f 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -61,10 +61,9 @@  enum adc_sort_mode {
 #include "thermal_hwmon.h"
 
 /**
- * The max sensors is two in rockchip SoCs.
- * Two sensors: CPU and GPU sensor.
+ * The max sensors is seven in rockchip SoCs.
  */
-#define SOC_MAX_SENSORS	2
+#define SOC_MAX_SENSORS	7
 
 /**
  * struct chip_tsadc_table - hold information about chip-specific differences
@@ -180,29 +179,49 @@  struct rockchip_thermal_data {
 #define TSADCV2_AUTO_CON			0x04
 #define TSADCV2_INT_EN				0x08
 #define TSADCV2_INT_PD				0x0c
+#define TSADCV3_AUTO_SRC_CON			0x0c
+#define TSADCV3_HT_INT_EN			0x14
+#define TSADCV3_HSHUT_GPIO_INT_EN		0x18
+#define TSADCV3_HSHUT_CRU_INT_EN		0x1c
+#define TSADCV3_INT_PD				0x24
+#define TSADCV3_HSHUT_PD			0x28
 #define TSADCV2_DATA(chn)			(0x20 + (chn) * 0x04)
 #define TSADCV2_COMP_INT(chn)		        (0x30 + (chn) * 0x04)
 #define TSADCV2_COMP_SHUT(chn)		        (0x40 + (chn) * 0x04)
+#define TSADCV3_DATA(chn)			(0x2c + (chn) * 0x04)
+#define TSADCV3_COMP_INT(chn)		        (0x6c + (chn) * 0x04)
+#define TSADCV3_COMP_SHUT(chn)		        (0x10c + (chn) * 0x04)
 #define TSADCV2_HIGHT_INT_DEBOUNCE		0x60
 #define TSADCV2_HIGHT_TSHUT_DEBOUNCE		0x64
+#define TSADCV3_HIGHT_INT_DEBOUNCE		0x14c
+#define TSADCV3_HIGHT_TSHUT_DEBOUNCE		0x150
 #define TSADCV2_AUTO_PERIOD			0x68
 #define TSADCV2_AUTO_PERIOD_HT			0x6c
+#define TSADCV3_AUTO_PERIOD			0x154
+#define TSADCV3_AUTO_PERIOD_HT			0x158
 
 #define TSADCV2_AUTO_EN				BIT(0)
+#define TSADCV2_AUTO_EN_MASK			BIT(16)
 #define TSADCV2_AUTO_SRC_EN(chn)		BIT(4 + (chn))
+#define TSADCV3_AUTO_SRC_EN(chn)		BIT(chn)
+#define TSADCV3_AUTO_SRC_EN_MASK(chn)		BIT(16 + chn)
 #define TSADCV2_AUTO_TSHUT_POLARITY_HIGH	BIT(8)
+#define TSADCV2_AUTO_TSHUT_POLARITY_MASK	BIT(24)
 
 #define TSADCV3_AUTO_Q_SEL_EN			BIT(1)
 
 #define TSADCV2_INT_SRC_EN(chn)			BIT(chn)
+#define TSADCV2_INT_SRC_EN_MASK(chn)		BIT(16 + (chn))
 #define TSADCV2_SHUT_2GPIO_SRC_EN(chn)		BIT(4 + (chn))
 #define TSADCV2_SHUT_2CRU_SRC_EN(chn)		BIT(8 + (chn))
 
 #define TSADCV2_INT_PD_CLEAR_MASK		~BIT(8)
 #define TSADCV3_INT_PD_CLEAR_MASK		~BIT(16)
+#define TSADCV4_INT_PD_CLEAR_MASK		0xffffffff
 
 #define TSADCV2_DATA_MASK			0xfff
 #define TSADCV3_DATA_MASK			0x3ff
+#define TSADCV4_DATA_MASK			0x1ff
 
 #define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT	4
 #define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT	4
@@ -213,6 +232,8 @@  struct rockchip_thermal_data {
 
 #define TSADCV5_AUTO_PERIOD_TIME		1622 /* 2.5ms */
 #define TSADCV5_AUTO_PERIOD_HT_TIME		1622 /* 2.5ms */
+#define TSADCV6_AUTO_PERIOD_TIME		5000 /* 2.5ms */
+#define TSADCV6_AUTO_PERIOD_HT_TIME		5000 /* 2.5ms */
 
 #define TSADCV2_USER_INTER_PD_SOC		0x340 /* 13 clocks */
 #define TSADCV5_USER_INTER_PD_SOC		0xfc0 /* 97us, at least 90us */
@@ -229,6 +250,12 @@  struct rockchip_thermal_data {
 #define RK3568_GRF_TSADC_ANA_REG2		(0x10001 << 2)
 #define RK3568_GRF_TSADC_TSEN			(0x10001 << 8)
 
+#define RK3588_GRF0_TSADC_CON			0x0100
+
+#define RK3588_GRF0_TSADC_TRM			(0xff0077 << 0)
+#define RK3588_GRF0_TSADC_SHUT_2CRU		(0x30003 << 10)
+#define RK3588_GRF0_TSADC_SHUT_2GPIO		(0x70007 << 12)
+
 #define GRF_SARADC_TESTBIT_ON			(0x10001 << 2)
 #define GRF_TSADC_TESTBIT_H_ON			(0x10001 << 2)
 #define GRF_TSADC_VCM_EN_L			(0x10001 << 7)
@@ -523,6 +550,15 @@  static const struct tsadc_table rk3568_code_table[] = {
 	{TSADCV2_DATA_MASK, 125000},
 };
 
+static const struct tsadc_table rk3588_code_table[] = {
+	{0, -40000},
+	{215, -40000},
+	{285, 25000},
+	{350, 85000},
+	{395, 125000},
+	{TSADCV4_DATA_MASK, 125000},
+};
+
 static u32 rk_tsadcv2_temp_to_code(const struct chip_tsadc_table *table,
 				   int temp)
 {
@@ -793,6 +829,25 @@  static void rk_tsadcv7_initialize(struct regmap *grf, void __iomem *regs,
 	}
 }
 
+static void rk_tsadcv8_initialize(struct regmap *grf, void __iomem *regs,
+				  enum tshut_polarity tshut_polarity)
+{
+	writel_relaxed(TSADCV6_AUTO_PERIOD_TIME, regs + TSADCV3_AUTO_PERIOD);
+	writel_relaxed(TSADCV6_AUTO_PERIOD_HT_TIME,
+		       regs + TSADCV3_AUTO_PERIOD_HT);
+	writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
+		       regs + TSADCV3_HIGHT_INT_DEBOUNCE);
+	writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
+		       regs + TSADCV3_HIGHT_TSHUT_DEBOUNCE);
+	if (tshut_polarity == TSHUT_HIGH_ACTIVE)
+		writel_relaxed(TSADCV2_AUTO_TSHUT_POLARITY_HIGH |
+			       TSADCV2_AUTO_TSHUT_POLARITY_MASK,
+			       regs + TSADCV2_AUTO_CON);
+	else
+		writel_relaxed(TSADCV2_AUTO_TSHUT_POLARITY_MASK,
+			       regs + TSADCV2_AUTO_CON);
+}
+
 static void rk_tsadcv2_irq_ack(void __iomem *regs)
 {
 	u32 val;
@@ -809,6 +864,17 @@  static void rk_tsadcv3_irq_ack(void __iomem *regs)
 	writel_relaxed(val & TSADCV3_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
 }
 
+static void rk_tsadcv4_irq_ack(void __iomem *regs)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV3_INT_PD);
+	writel_relaxed(val & TSADCV4_INT_PD_CLEAR_MASK, regs + TSADCV3_INT_PD);
+	val = readl_relaxed(regs + TSADCV3_HSHUT_PD);
+	writel_relaxed(val & TSADCV3_INT_PD_CLEAR_MASK,
+		       regs + TSADCV3_HSHUT_PD);
+}
+
 static void rk_tsadcv2_control(void __iomem *regs, bool enable)
 {
 	u32 val;
@@ -844,6 +910,18 @@  static void rk_tsadcv3_control(void __iomem *regs, bool enable)
 	writel_relaxed(val, regs + TSADCV2_AUTO_CON);
 }
 
+static void rk_tsadcv4_control(void __iomem *regs, bool enable)
+{
+	u32 val;
+
+	if (enable)
+		val = TSADCV2_AUTO_EN | TSADCV2_AUTO_EN_MASK;
+	else
+		val = TSADCV2_AUTO_EN_MASK;
+
+	writel_relaxed(val, regs + TSADCV2_AUTO_CON);
+}
+
 static int rk_tsadcv2_get_temp(const struct chip_tsadc_table *table,
 			       int chn, void __iomem *regs, int *temp)
 {
@@ -854,6 +932,16 @@  static int rk_tsadcv2_get_temp(const struct chip_tsadc_table *table,
 	return rk_tsadcv2_code_to_temp(table, val, temp);
 }
 
+static int rk_tsadcv4_get_temp(const struct chip_tsadc_table *table,
+			       int chn, void __iomem *regs, int *temp)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV3_DATA(chn));
+
+	return rk_tsadcv2_code_to_temp(table, val, temp);
+}
+
 static int rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table,
 				 int chn, void __iomem *regs, int temp)
 {
@@ -888,6 +976,33 @@  static int rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table,
 	return 0;
 }
 
+static int rk_tsadcv3_alarm_temp(const struct chip_tsadc_table *table,
+				 int chn, void __iomem *regs, int temp)
+{
+	u32 alarm_value;
+
+	/*
+	 * In some cases, some sensors didn't need the trip points, the
+	 * set_trips will pass {-INT_MAX, INT_MAX} to trigger tsadc alarm
+	 * in the end, ignore this case and disable the high temperature
+	 * interrupt.
+	 */
+	if (temp == INT_MAX) {
+		writel_relaxed(TSADCV2_INT_SRC_EN_MASK(chn),
+			       regs + TSADCV3_HT_INT_EN);
+		return 0;
+	}
+	/* Make sure the value is valid */
+	alarm_value = rk_tsadcv2_temp_to_code(table, temp);
+	if (alarm_value == table->data_mask)
+		return -ERANGE;
+	writel_relaxed(alarm_value & table->data_mask,
+		       regs + TSADCV3_COMP_INT(chn));
+	writel_relaxed(TSADCV2_INT_SRC_EN(chn) | TSADCV2_INT_SRC_EN_MASK(chn),
+		       regs + TSADCV3_HT_INT_EN);
+	return 0;
+}
+
 static int rk_tsadcv2_tshut_temp(const struct chip_tsadc_table *table,
 				 int chn, void __iomem *regs, int temp)
 {
@@ -907,6 +1022,25 @@  static int rk_tsadcv2_tshut_temp(const struct chip_tsadc_table *table,
 	return 0;
 }
 
+static int rk_tsadcv3_tshut_temp(const struct chip_tsadc_table *table,
+				 int chn, void __iomem *regs, int temp)
+{
+	u32 tshut_value;
+
+	/* Make sure the value is valid */
+	tshut_value = rk_tsadcv2_temp_to_code(table, temp);
+	if (tshut_value == table->data_mask)
+		return -ERANGE;
+
+	writel_relaxed(tshut_value, regs + TSADCV3_COMP_SHUT(chn));
+
+	/* TSHUT will be valid */
+	writel_relaxed(TSADCV3_AUTO_SRC_EN(chn) | TSADCV3_AUTO_SRC_EN_MASK(chn),
+		       regs + TSADCV3_AUTO_SRC_CON);
+
+	return 0;
+}
+
 static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 				  enum tshut_mode mode)
 {
@@ -924,6 +1058,22 @@  static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 	writel_relaxed(val, regs + TSADCV2_INT_EN);
 }
 
+static void rk_tsadcv3_tshut_mode(int chn, void __iomem *regs,
+				  enum tshut_mode mode)
+{
+	u32 val_gpio, val_cru;
+
+	if (mode == TSHUT_MODE_GPIO) {
+		val_gpio = TSADCV2_INT_SRC_EN(chn) | TSADCV2_INT_SRC_EN_MASK(chn);
+		val_cru = TSADCV2_INT_SRC_EN_MASK(chn);
+	} else {
+		val_cru = TSADCV2_INT_SRC_EN(chn) | TSADCV2_INT_SRC_EN_MASK(chn);
+		val_gpio = TSADCV2_INT_SRC_EN_MASK(chn);
+	}
+	writel_relaxed(val_gpio, regs + TSADCV3_HSHUT_GPIO_INT_EN);
+	writel_relaxed(val_cru, regs + TSADCV3_HSHUT_CRU_INT_EN);
+}
+
 static const struct rockchip_tsadc_chip px30_tsadc_data = {
 	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
 	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
@@ -1144,6 +1294,28 @@  static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
 	},
 };
 
+static const struct rockchip_tsadc_chip rk3588_tsadc_data = {
+	/* top, big_core0, big_core1, little_core, center, gpu, npu */
+	.chn_id = {0, 1, 2, 3, 4, 5, 6},
+	.chn_num = 7, /* seven channels for tsadc */
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+	.initialize = rk_tsadcv8_initialize,
+	.irq_ack = rk_tsadcv4_irq_ack,
+	.control = rk_tsadcv4_control,
+	.get_temp = rk_tsadcv4_get_temp,
+	.set_alarm_temp = rk_tsadcv3_alarm_temp,
+	.set_tshut_temp = rk_tsadcv3_tshut_temp,
+	.set_tshut_mode = rk_tsadcv3_tshut_mode,
+	.table = {
+		.id = rk3588_code_table,
+		.length = ARRAY_SIZE(rk3588_code_table),
+		.data_mask = TSADCV4_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
 static const struct of_device_id of_rockchip_thermal_match[] = {
 	{	.compatible = "rockchip,px30-tsadc",
 		.data = (void *)&px30_tsadc_data,
@@ -1180,6 +1352,10 @@  static const struct of_device_id of_rockchip_thermal_match[] = {
 		.compatible = "rockchip,rk3568-tsadc",
 		.data = (void *)&rk3568_tsadc_data,
 	},
+	{
+		.compatible = "rockchip,rk3588-tsadc",
+		.data = (void *)&rk3588_tsadc_data,
+	},
 	{ /* end */ },
 };
 MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);