diff mbox series

[V4,1/4] selftests: amd-pstate: Modify amd-pstate-ut.sh to basic.sh.

Message ID 20221024013356.1639489-2-li.meng@amd.com
State New
Headers show
Series Add tbench/gitsource new test cases for amd-pstate-ut | expand

Commit Message

Meng, Li (Jassmine) Oct. 24, 2022, 1:33 a.m. UTC
Modify amd-pstate-ut.sh to basic.sh.
The purpose of this modification is to facilitate the subsequent
addition of gitsource, tbench and other tests.
Then you can specify test case in kselftest/amd-pstate, for example:
sudo ./run.sh -c basic, this command only test basic kernel funcitions.
The detail please run the below script.
./run.sh --help

Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
---
 tools/testing/selftests/amd-pstate/Makefile   |   3 +-
 .../selftests/amd-pstate/amd-pstate-ut.sh     |  56 -------
 tools/testing/selftests/amd-pstate/basic.sh   |  38 +++++
 tools/testing/selftests/amd-pstate/run.sh     | 142 ++++++++++++++++++
 4 files changed, 182 insertions(+), 57 deletions(-)
 delete mode 100755 tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
 create mode 100755 tools/testing/selftests/amd-pstate/basic.sh
 create mode 100755 tools/testing/selftests/amd-pstate/run.sh

Comments

Shuah Khan Oct. 28, 2022, 7:27 a.m. UTC | #1
On 10/23/22 19:33, Meng Li wrote:
> Modify amd-pstate-ut.sh to basic.sh.
> The purpose of this modification is to facilitate the subsequent
> addition of gitsource, tbench and other tests.
> Then you can specify test case in kselftest/amd-pstate, for example:
> sudo ./run.sh -c basic, this command only test basic kernel funcitions.
> The detail please run the below script.
> ./run.sh --help
> 
> Signed-off-by: Meng Li <li.meng@amd.com>
> Acked-by: Huang Rui <ray.huang@amd.com>
> ---
>   tools/testing/selftests/amd-pstate/Makefile   |   3 +-
>   .../selftests/amd-pstate/amd-pstate-ut.sh     |  56 -------
>   tools/testing/selftests/amd-pstate/basic.sh   |  38 +++++
>   tools/testing/selftests/amd-pstate/run.sh     | 142 ++++++++++++++++++
>   4 files changed, 182 insertions(+), 57 deletions(-)
>   delete mode 100755 tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
>   create mode 100755 tools/testing/selftests/amd-pstate/basic.sh

Is there a reason to delete followed by a create?  It is cleaner to rename amd-pstate-ut.sh
it to basic.sh first and then make changes.

>   create mode 100755 tools/testing/selftests/amd-pstate/run.sh
> 
> diff --git a/tools/testing/selftests/amd-pstate/Makefile b/tools/testing/selftests/amd-pstate/Makefile
> index 199867f44b32..6f4c7b01e3bb 100644
> --- a/tools/testing/selftests/amd-pstate/Makefile
> +++ b/tools/testing/selftests/amd-pstate/Makefile
> @@ -4,6 +4,7 @@
>   # No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
>   all:
>   
> -TEST_PROGS := amd-pstate-ut.sh
> +TEST_PROGS := run.sh
> +TEST_FILES := basic.sh
>   
>   include ../lib.mk
> diff --git a/tools/testing/selftests/amd-pstate/amd-pstate-ut.sh b/tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
> deleted file mode 100755
> index f8e82d91ffcf..000000000000
> --- a/tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
> +++ /dev/null
> @@ -1,56 +0,0 @@
> -#!/bin/sh
> -# SPDX-License-Identifier: GPL-2.0
> -
> -# amd-pstate-ut is a test module for testing the amd-pstate driver.
> -# It can only run on x86 architectures and current cpufreq driver
> -# must be amd-pstate.
> -# (1) It can help all users to verify their processor support
> -# (SBIOS/Firmware or Hardware).
> -# (2) Kernel can have a basic function test to avoid the kernel
> -# regression during the update.
> -# (3) We can introduce more functional or performance tests to align
> -# the result together, it will benefit power and performance scale optimization.
> -
> -# Kselftest framework requirement - SKIP code is 4.
> -ksft_skip=4
> -
> -# amd-pstate-ut only run on x86/x86_64 AMD systems.
> -ARCH=$(uname -m 2>/dev/null | sed -e 's/i.86/x86/' -e 's/x86_64/x86/')
> -VENDOR=$(cat /proc/cpuinfo | grep -m 1 'vendor_id' | awk '{print $NF}')
> -
> -if ! echo "$ARCH" | grep -q x86; then
> -	echo "$0 # Skipped: Test can only run on x86 architectures."
> -	exit $ksft_skip
> -fi
> -
> -if ! echo "$VENDOR" | grep -iq amd; then
> -	echo "$0 # Skipped: Test can only run on AMD CPU."
> -	echo "$0 # Current cpu vendor is $VENDOR."
> -	exit $ksft_skip
> -fi
> -
> -scaling_driver=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_driver)
> -if [ "$scaling_driver" != "amd-pstate" ]; then
> -	echo "$0 # Skipped: Test can only run on amd-pstate driver."
> -	echo "$0 # Please set X86_AMD_PSTATE enabled."
> -	echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
> -	exit $ksft_skip
> -fi
> -
> -msg="Skip all tests:"
> -if [ ! -w /dev ]; then
> -    echo $msg please run this as root >&2
> -    exit $ksft_skip
> -fi
> -
> -if ! /sbin/modprobe -q -n amd-pstate-ut; then
> -	echo "amd-pstate-ut: module amd-pstate-ut is not found [SKIP]"
> -	exit $ksft_skip
> -fi
> -if /sbin/modprobe -q amd-pstate-ut; then
> -	/sbin/modprobe -q -r amd-pstate-ut
> -	echo "amd-pstate-ut: ok"
> -else
> -	echo "amd-pstate-ut: [FAIL]"
> -	exit 1
> -fi
> diff --git a/tools/testing/selftests/amd-pstate/basic.sh b/tools/testing/selftests/amd-pstate/basic.sh
> new file mode 100755
> index 000000000000..e4c43193e4a3
> --- /dev/null
> +++ b/tools/testing/selftests/amd-pstate/basic.sh
> @@ -0,0 +1,38 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0
> +
> +# amd-pstate-ut is a test module for testing the amd-pstate driver.
> +# It can only run on x86 architectures and current cpufreq driver
> +# must be amd-pstate.
> +# (1) It can help all users to verify their processor support
> +# (SBIOS/Firmware or Hardware).
> +# (2) Kernel can have a basic function test to avoid the kernel
> +# regression during the update.
> +# (3) We can introduce more functional or performance tests to align
> +# the result together, it will benefit power and performance scale optimization.
> +
> +# protect against multiple inclusion
> +if [ $FILE_BASIC ]; then
> +	return 0
> +else
> +	FILE_BASIC=DONE
> +fi
> +
> +amd_pstate_basic()
> +{
> +	printf "\n---------------------------------------------\n"
> +	printf "*** Running AMD P-state ut                ***"
> +	printf "\n---------------------------------------------\n"
> +
> +	if ! /sbin/modprobe -q -n amd-pstate-ut; then
> +		echo "amd-pstate-ut: module amd-pstate-ut is not found [SKIP]"
> +		exit $ksft_skip
> +	fi
> +	if /sbin/modprobe -q amd-pstate-ut; then
> +		/sbin/modprobe -q -r amd-pstate-ut
> +		echo "amd-pstate-basic: ok"
> +	else
> +		echo "amd-pstate-basic: [FAIL]"
> +		exit 1
> +	fi
> +}
> diff --git a/tools/testing/selftests/amd-pstate/run.sh b/tools/testing/selftests/amd-pstate/run.sh
> new file mode 100755
> index 000000000000..715e9d01484f
> --- /dev/null
> +++ b/tools/testing/selftests/amd-pstate/run.sh
> @@ -0,0 +1,142 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +
> +# protect against multiple inclusion
> +if [ $FILE_MAIN ]; then
> +	return 0
> +else
> +	FILE_MAIN=DONE
> +fi
> +
> +source basic.sh
> +
> +# amd-pstate-ut only run on x86/x86_64 AMD systems.
> +ARCH=$(uname -m 2>/dev/null | sed -e 's/i.86/x86/' -e 's/x86_64/x86/')
> +VENDOR=$(cat /proc/cpuinfo | grep -m 1 'vendor_id' | awk '{print $NF}')
> +
> +FUNC=all
> +OUTFILE=selftest
> +
> +# Kselftest framework requirement - SKIP code is 4.
> +ksft_skip=4
> +
> +# All amd-pstate tests
> +amd_pstate_all()
> +{
> +	printf "\n=============================================\n"
> +	printf "***** Running AMD P-state Sanity Tests  *****\n"
> +	printf "=============================================\n\n"
> +
> +	# unit test for amd-pstate kernel driver
> +	amd_pstate_basic
> +}
> +
> +helpme()

Make this just help()

> +{
> +	printf "Usage: $0 [OPTION...]
> +	[-h <help>]
> +	[-o <output-file-for-dump>]
> +	[-c <all: All testing,
> +	     basic: Basic testing.>]
> +	\n"
> +	exit 2
> +}
> +
> +parse_arguments()
> +{
> +	while getopts ho:c: arg
> +	do
> +		case $arg in
> +			h) # --help
> +				helpme
> +				;;
> +
> +			c) # --func_type (Function to perform: basic (default: all))
> +				FUNC=$OPTARG
> +				;;
> +
> +			o) # --output-file (Output file to store dumps)
> +				OUTFILE=$OPTARG
> +				;;
> +
> +			*)
> +				helpme

Same here

> +				;;
> +		esac
> +	done
> +}
> +
> +prerequisite()
> +{
> +	if ! echo "$ARCH" | grep -q x86; then
> +		echo "$0 # Skipped: Test can only run on x86 architectures."
> +		exit $ksft_skip
> +	fi
> +
> +	if ! echo "$VENDOR" | grep -iq amd; then
> +		echo "$0 # Skipped: Test can only run on AMD CPU."
> +		echo "$0 # Current cpu vendor is $VENDOR."
> +		exit $ksft_skip
> +	fi
> +
> +	scaling_driver=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_driver)
> +	if [ "$scaling_driver" != "amd-pstate" ]; then
> +		echo "$0 # Skipped: Test can only run on amd-pstate driver."
> +		echo "$0 # Please set X86_AMD_PSTATE enabled."
> +		echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
> +		exit $ksft_skip
> +	fi
> +
> +	msg="Skip all tests:"
> +	if [ ! -w /dev ]; then
> +		echo $msg please run this as root >&2
> +		exit $ksft_skip
> +	fi
> +}
> +
> +do_test()
> +{
> +	case "$FUNC" in
> +		"all")
> +			amd_pstate_all
> +			;;
> +
> +		"basic")
> +			amd_pstate_basic
> +			;;
> +
> +		*)
> +			echo "Invalid [-f] function type"
> +			helpme
> +			;;
> +	esac
> +}
> +
> +# clear dumps
> +pre_clear_dumps()
> +{
> +	case "$FUNC" in
> +		"all")
> +			rm -rf $OUTFILE*
> +			;;
> +
> +		*)
> +			;;
> +	esac
> +}
> +
> +post_clear_dumps()
> +{
> +	rm -rf $OUTFILE.log
> +}
> +
> +# Parse arguments
> +parse_arguments $@
> +
> +# Make sure all requirements are met
> +prerequisite
> +
> +# Run requested functions
> +pre_clear_dumps
> +do_test | tee -a $OUTFILE.log
> +post_clear_dumps
diff mbox series

Patch

diff --git a/tools/testing/selftests/amd-pstate/Makefile b/tools/testing/selftests/amd-pstate/Makefile
index 199867f44b32..6f4c7b01e3bb 100644
--- a/tools/testing/selftests/amd-pstate/Makefile
+++ b/tools/testing/selftests/amd-pstate/Makefile
@@ -4,6 +4,7 @@ 
 # No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
 all:
 
-TEST_PROGS := amd-pstate-ut.sh
+TEST_PROGS := run.sh
+TEST_FILES := basic.sh
 
 include ../lib.mk
diff --git a/tools/testing/selftests/amd-pstate/amd-pstate-ut.sh b/tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
deleted file mode 100755
index f8e82d91ffcf..000000000000
--- a/tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
+++ /dev/null
@@ -1,56 +0,0 @@ 
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-# amd-pstate-ut is a test module for testing the amd-pstate driver.
-# It can only run on x86 architectures and current cpufreq driver
-# must be amd-pstate.
-# (1) It can help all users to verify their processor support
-# (SBIOS/Firmware or Hardware).
-# (2) Kernel can have a basic function test to avoid the kernel
-# regression during the update.
-# (3) We can introduce more functional or performance tests to align
-# the result together, it will benefit power and performance scale optimization.
-
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
-# amd-pstate-ut only run on x86/x86_64 AMD systems.
-ARCH=$(uname -m 2>/dev/null | sed -e 's/i.86/x86/' -e 's/x86_64/x86/')
-VENDOR=$(cat /proc/cpuinfo | grep -m 1 'vendor_id' | awk '{print $NF}')
-
-if ! echo "$ARCH" | grep -q x86; then
-	echo "$0 # Skipped: Test can only run on x86 architectures."
-	exit $ksft_skip
-fi
-
-if ! echo "$VENDOR" | grep -iq amd; then
-	echo "$0 # Skipped: Test can only run on AMD CPU."
-	echo "$0 # Current cpu vendor is $VENDOR."
-	exit $ksft_skip
-fi
-
-scaling_driver=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_driver)
-if [ "$scaling_driver" != "amd-pstate" ]; then
-	echo "$0 # Skipped: Test can only run on amd-pstate driver."
-	echo "$0 # Please set X86_AMD_PSTATE enabled."
-	echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
-	exit $ksft_skip
-fi
-
-msg="Skip all tests:"
-if [ ! -w /dev ]; then
-    echo $msg please run this as root >&2
-    exit $ksft_skip
-fi
-
-if ! /sbin/modprobe -q -n amd-pstate-ut; then
-	echo "amd-pstate-ut: module amd-pstate-ut is not found [SKIP]"
-	exit $ksft_skip
-fi
-if /sbin/modprobe -q amd-pstate-ut; then
-	/sbin/modprobe -q -r amd-pstate-ut
-	echo "amd-pstate-ut: ok"
-else
-	echo "amd-pstate-ut: [FAIL]"
-	exit 1
-fi
diff --git a/tools/testing/selftests/amd-pstate/basic.sh b/tools/testing/selftests/amd-pstate/basic.sh
new file mode 100755
index 000000000000..e4c43193e4a3
--- /dev/null
+++ b/tools/testing/selftests/amd-pstate/basic.sh
@@ -0,0 +1,38 @@ 
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# amd-pstate-ut is a test module for testing the amd-pstate driver.
+# It can only run on x86 architectures and current cpufreq driver
+# must be amd-pstate.
+# (1) It can help all users to verify their processor support
+# (SBIOS/Firmware or Hardware).
+# (2) Kernel can have a basic function test to avoid the kernel
+# regression during the update.
+# (3) We can introduce more functional or performance tests to align
+# the result together, it will benefit power and performance scale optimization.
+
+# protect against multiple inclusion
+if [ $FILE_BASIC ]; then
+	return 0
+else
+	FILE_BASIC=DONE
+fi
+
+amd_pstate_basic()
+{
+	printf "\n---------------------------------------------\n"
+	printf "*** Running AMD P-state ut                ***"
+	printf "\n---------------------------------------------\n"
+
+	if ! /sbin/modprobe -q -n amd-pstate-ut; then
+		echo "amd-pstate-ut: module amd-pstate-ut is not found [SKIP]"
+		exit $ksft_skip
+	fi
+	if /sbin/modprobe -q amd-pstate-ut; then
+		/sbin/modprobe -q -r amd-pstate-ut
+		echo "amd-pstate-basic: ok"
+	else
+		echo "amd-pstate-basic: [FAIL]"
+		exit 1
+	fi
+}
diff --git a/tools/testing/selftests/amd-pstate/run.sh b/tools/testing/selftests/amd-pstate/run.sh
new file mode 100755
index 000000000000..715e9d01484f
--- /dev/null
+++ b/tools/testing/selftests/amd-pstate/run.sh
@@ -0,0 +1,142 @@ 
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# protect against multiple inclusion
+if [ $FILE_MAIN ]; then
+	return 0
+else
+	FILE_MAIN=DONE
+fi
+
+source basic.sh
+
+# amd-pstate-ut only run on x86/x86_64 AMD systems.
+ARCH=$(uname -m 2>/dev/null | sed -e 's/i.86/x86/' -e 's/x86_64/x86/')
+VENDOR=$(cat /proc/cpuinfo | grep -m 1 'vendor_id' | awk '{print $NF}')
+
+FUNC=all
+OUTFILE=selftest
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# All amd-pstate tests
+amd_pstate_all()
+{
+	printf "\n=============================================\n"
+	printf "***** Running AMD P-state Sanity Tests  *****\n"
+	printf "=============================================\n\n"
+
+	# unit test for amd-pstate kernel driver
+	amd_pstate_basic
+}
+
+helpme()
+{
+	printf "Usage: $0 [OPTION...]
+	[-h <help>]
+	[-o <output-file-for-dump>]
+	[-c <all: All testing,
+	     basic: Basic testing.>]
+	\n"
+	exit 2
+}
+
+parse_arguments()
+{
+	while getopts ho:c: arg
+	do
+		case $arg in
+			h) # --help
+				helpme
+				;;
+
+			c) # --func_type (Function to perform: basic (default: all))
+				FUNC=$OPTARG
+				;;
+
+			o) # --output-file (Output file to store dumps)
+				OUTFILE=$OPTARG
+				;;
+
+			*)
+				helpme
+				;;
+		esac
+	done
+}
+
+prerequisite()
+{
+	if ! echo "$ARCH" | grep -q x86; then
+		echo "$0 # Skipped: Test can only run on x86 architectures."
+		exit $ksft_skip
+	fi
+
+	if ! echo "$VENDOR" | grep -iq amd; then
+		echo "$0 # Skipped: Test can only run on AMD CPU."
+		echo "$0 # Current cpu vendor is $VENDOR."
+		exit $ksft_skip
+	fi
+
+	scaling_driver=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_driver)
+	if [ "$scaling_driver" != "amd-pstate" ]; then
+		echo "$0 # Skipped: Test can only run on amd-pstate driver."
+		echo "$0 # Please set X86_AMD_PSTATE enabled."
+		echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
+		exit $ksft_skip
+	fi
+
+	msg="Skip all tests:"
+	if [ ! -w /dev ]; then
+		echo $msg please run this as root >&2
+		exit $ksft_skip
+	fi
+}
+
+do_test()
+{
+	case "$FUNC" in
+		"all")
+			amd_pstate_all
+			;;
+
+		"basic")
+			amd_pstate_basic
+			;;
+
+		*)
+			echo "Invalid [-f] function type"
+			helpme
+			;;
+	esac
+}
+
+# clear dumps
+pre_clear_dumps()
+{
+	case "$FUNC" in
+		"all")
+			rm -rf $OUTFILE*
+			;;
+
+		*)
+			;;
+	esac
+}
+
+post_clear_dumps()
+{
+	rm -rf $OUTFILE.log
+}
+
+# Parse arguments
+parse_arguments $@
+
+# Make sure all requirements are met
+prerequisite
+
+# Run requested functions
+pre_clear_dumps
+do_test | tee -a $OUTFILE.log
+post_clear_dumps