diff mbox series

[V2,3/7] ARM: dts: bcm2835: adjust DMA node names

Message ID 20230617133620.53129-4-stefan.wahren@i2se.com
State Accepted
Commit 3450f9f52a39b9b17d81918f57747111383c6294
Headers show
Series ARM: dts: bcm283x: Improve device-trees and bindings | expand

Commit Message

Stefan Wahren June 17, 2023, 1:36 p.m. UTC
After converting the bcm2835-dma DT binding to YAML, the DT schema
checks gave warnings like:

$nodename:0: 'dma@7e007000' does not match '^dma-controller(@.*)?$'

So fix them accordingly.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 arch/arm/boot/dts/bcm2711.dtsi        | 2 +-
 arch/arm/boot/dts/bcm2835-common.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Comments

Florian Fainelli June 23, 2023, 8:59 p.m. UTC | #1
From: Florian Fainelli <f.fainelli@gmail.com>

On Sat, 17 Jun 2023 15:36:16 +0200, Stefan Wahren <stefan.wahren@i2se.com> wrote:
> After converting the bcm2835-dma DT binding to YAML, the DT schema
> checks gave warnings like:
> 
> $nodename:0: 'dma@7e007000' does not match '^dma-controller(@.*)?$'
> 
> So fix them accordingly.
> 
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 097e9f252235..d30c19311145 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -76,7 +76,7 @@  thermal: thermal {
 			};
 		};
 
-		dma: dma@7e007000 {
+		dma: dma-controller@7e007000 {
 			compatible = "brcm,bcm2835-dma";
 			reg = <0x7e007000 0xb00>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index bb7e8f7facaf..9261b67dbee1 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -8,7 +8,7 @@  / {
 	interrupt-parent = <&intc>;
 
 	soc {
-		dma: dma@7e007000 {
+		dma: dma-controller@7e007000 {
 			compatible = "brcm,bcm2835-dma";
 			reg = <0x7e007000 0xf00>;
 			interrupts = <1 16>,