diff mbox series

[v4,5/5] arm64: dts: qcom: ipq5332: Add icc provider ability to gcc

Message ID 20240723090304.336428-6-quic_varada@quicinc.com
State Superseded
Headers show
Series Add interconnect driver for IPQ5332 SoC | expand

Commit Message

Varadarajan Narayanan July 23, 2024, 9:03 a.m. UTC 
IPQ SoCs dont involve RPM in managing NoC related clocks and
there is no NoC scaling. Linux itself handles these clocks.
However, these should not be exposed as just clocks and align
with other Qualcomm SoCs that handle these clocks from a
interconnect provider.

Hence include icc provider capability to the gcc node so that
peripherals can use the interconnect facility to enable these
clocks. Change USB to use the icc-clk framework for the iface
clock.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v3: Fix #include file order
---
 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 573656587c0d..7e8f9d578382 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -7,6 +7,7 @@ 
 
 #include <dt-bindings/clock/qcom,apss-ipq.h>
 #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq5332.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -208,6 +209,7 @@  gcc: clock-controller@1800000 {
 			reg = <0x01800000 0x80000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#interconnect-cells = <1>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
 				 <0>,
@@ -327,11 +329,9 @@  usb: usb@8af8800 {
 					  "dm_hs_phy_irq";
 
 			clocks = <&gcc GCC_USB0_MASTER_CLK>,
-				 <&gcc GCC_SNOC_USB_CLK>,
 				 <&gcc GCC_USB0_SLEEP_CLK>,
 				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			clock-names = "core",
-				      "iface",
 				      "sleep",
 				      "mock_utmi";
 
@@ -342,6 +342,9 @@  usb: usb@8af8800 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			interconnects = <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>,
+					<&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>;
+			interconnect-names = "usb-ddr", "apps-usb";
 
 			status = "disabled";