diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 130360014c5e14c778e348d37e601f60325b0b14..defeb697c8d89686e3aaf2e6f7b6cb7493219336 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
 #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -39,6 +40,7 @@ cpu0: cpu@0 {
 			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -49,6 +51,7 @@ cpu1: cpu@1 {
 			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		l2_0: l2-cache {
@@ -182,6 +185,117 @@ pcie0_phy: phy@86000 {
 			status = "disabled";
 		};
 
+		qfprom: qfprom@a0000 {
+			compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
+			reg = <0x000a0000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_mode: mode@249 {
+				reg = <0x249 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base1: base1@249 {
+				reg = <0x249 0x2>;
+				bits = <3 8>;
+			};
+
+			tsens_base2: base2@24a {
+				reg = <0x24a 0x2>;
+				bits = <3 8>;
+			};
+
+			tsens_s0_p1: s0-p1@24b {
+				reg = <0x24b 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s0_p2: s0-p2@24c {
+				reg = <0x24c 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@24c {
+				reg = <0x24c 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@24d {
+				reg = <0x24d 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@24e {
+				reg = <0x24e 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@24f {
+				reg = <0x24f 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@24f {
+				reg = <0x24f 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@250 {
+				reg = <0x250 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s4_p1: s4-p1@251 {
+				reg = <0x251 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s4_p2: s4-p2@254 {
+				reg = <0x254 0x1>;
+				bits = <0 6>;
+			};
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5018-tsens";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>,
+				      <&tsens_base2>,
+				      <&tsens_s0_p1>,
+				      <&tsens_s0_p2>,
+				      <&tsens_s1_p1>,
+				      <&tsens_s1_p2>,
+				      <&tsens_s2_p1>,
+				      <&tsens_s2_p2>,
+				      <&tsens_s3_p1>,
+				      <&tsens_s3_p2>,
+				      <&tsens_s4_p1>,
+				      <&tsens_s4_p2>;
+
+			nvmem-cell-names = "mode",
+					   "base1",
+					   "base2",
+					   "s0_p1",
+					   "s0_p2",
+					   "s1_p1",
+					   "s1_p2",
+					   "s2_p1",
+					   "s2_p2",
+					   "s3_p1",
+					   "s3_p2",
+					   "s4_p1",
+					   "s4_p2";
+
+			interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "uplow";
+			#qcom,sensors = <5>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -631,6 +745,74 @@ pcie@0 {
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <2>;
+					type = "critical";
+				};
+
+				cpu_alert: cpu-passive {
+					temperature = <100000>;
+					hysteresis = <2>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gephy-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				gephy-critical {
+					temperature = <120000>;
+					hysteresis = <2>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				top-glue-critical {
+					temperature = <120000>;
+					hysteresis = <2>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi32-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				ubi32-critical {
+					temperature = <120000>;
+					hysteresis = <2>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
