| [v3,4/4] ARM: Exynos4: Add device tree support for gpio wakeup interrupt controller |
2012-02-22 |
thomas.abraham@linaro.org |
|
New |
| ARM: EXYNOS: update secondary startup code to use 24 bits of MPIDR |
2013-02-12 |
Chander Kashyap |
|
New |
| ARM: EXYNOS4: Enable WM8994 MFD on I2S selection |
2011-05-25 |
Kukjin Kim |
|
New |
| [V2,2/6] thermal: Add generic cpufreq cooling implementation |
2012-03-19 |
Amit Daniel Kachhap |
|
New |
| [V2,3/6] thermal: Add generic cpuhotplug cooling implementation |
2012-03-19 |
Amit Daniel Kachhap |
|
New |
| [V2,4/6] hwmon: exynos4: Move thermal sensor driver to driver/thermal directory |
2012-03-19 |
Amit Daniel Kachhap |
|
New |
| [V2,5/6] thermal: exynos4: Register the tmu sensor with the kernel thermal layer |
2012-03-19 |
Amit Daniel Kachhap |
|
New |
| [V2,6/6] ARM: exynos4: Add thermal sensor driver platform device support |
2012-03-19 |
Amit Daniel Kachhap |
|
New |
| [v4,1/5] ARM: dts: Add FIMD node to exynos4 |
2013-02-15 |
Vikas C Sajjan |
|
New |
| [v2,3/4] ARM: Exynos4: Remove arch_initcall for wakeup interrupt initialization |
2011-12-11 |
thomas.abraham@linaro.org |
|
New |
| ARM: SAMSUNG: Fix compilation error with s3c2410_defconfig |
2012-08-07 |
Kukjin Kim |
|
New |
| ARM: SAMSUNG: Fix compilation error with s3c2410_defconfig |
2012-08-08 |
Kukjin Kim |
|
New |
| ARM: SAMSUNG: Save/restore GPIO drive strength across suspend/resume |
2011-11-12 |
Inderpal Singh |
|
New |
| [V5,1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210 |
2012-01-05 |
Amit Daniel Kachhap |
|
New |
| [V5,4/5] ARM: exynos: remove useless code to save/restore L2 |
2012-01-05 |
Amit Daniel Kachhap |
|
New |
| ARM: SAMSUNG: Fix compilation error with s3c2410_defconfig |
2012-08-08 |
Kukjin Kim |
|
New |
| ARM: exynos4: Fix for stall in case of cpu hotplug or sleep |
2011-11-18 |
Amit Daniel Kachhap |
|
New |
| [V5,2/5] ARM: s5p: add L2 early resume code |
2012-01-05 |
Amit Daniel Kachhap |
|
New |
| [V5,3/5] ARM: exynos: save L2 settings during bootup |
2012-01-05 |
Amit Daniel Kachhap |
|
New |
| [V5,5/5] ARM: exynos: Enable l2 configuration through device tree |
2012-01-05 |
Amit Daniel Kachhap |
|
New |
| ASoC: Samsung: Fix build error |
2012-08-08 |
Kukjin Kim |
|
New |
| [V3,2/6] ARM: s5p: remove useless churn in sleep.S |
2011-11-22 |
Amit Daniel Kachhap |
|
New |
| [V3,4/6] ARM: s5p: add L2 early resume code |
2011-11-22 |
Amit Daniel Kachhap |
|
New |
| ARM: Exynos: Use lcd power control driver for lcd panel |
2012-01-05 |
thomas.abraham@linaro.org |
|
New |
| [V3,5/6] ARM: exynos: remove useless code to save/restore L2 |
2011-11-22 |
Amit Daniel Kachhap |
|
New |
| [V3,6/6] ARM: exynos: Enable l2 configuration through device tree |
2011-11-22 |
Amit Daniel Kachhap |
|
New |
| [2/2] arm: exynos: allow platform-lcd driver to control lcd regulator source on origen |
2011-12-05 |
thomas.abraham@linaro.org |
|
New |
| [V4,2/5] ARM: exynos: save L2 settings during bootup |
2011-12-05 |
Amit Daniel Kachhap |
|
New |
| [v5,1/2] ARM: Exynos: Add irq_domain support for interrupt combiner |
2012-03-24 |
thomas.abraham@linaro.org |
|
New |
| [v5,2/2] ARM: Exynos: Add device tree support for interrupt combiner |
2012-03-24 |
thomas.abraham@linaro.org |
|
New |
| [v4,2/4] ARM: Exynos: Add irq_domain support for gpio wakeup interrupts |
2012-03-24 |
thomas.abraham@linaro.org |
|
New |
| [v4,4/4] ARM: Exynos: Add device tree support for gpio wakeup interrupt controller |
2012-03-24 |
thomas.abraham@linaro.org |
|
New |
| [RESEND] ARM: Exynos: Add irq domain and device tree support for interrupt combiner |
2011-12-11 |
thomas.abraham@linaro.org |
|
New |
| [v2,1/4] ARM: Exynos4: Simplify EINT number to linux irq number translation |
2011-12-11 |
thomas.abraham@linaro.org |
|
New |
| [v2,2/4] ARM: Exynos4: Add irq_domain support for wakeup interrupts |
2011-12-11 |
thomas.abraham@linaro.org |
|
New |
| [v2,4/4] ARM: Exynos4: Add device tree support for external wakeup interrupt controller |
2011-12-11 |
thomas.abraham@linaro.org |
|
New |
| [v4,2/5] hwmon: exynos4: Move thermal sensor driver to driver/thermal directory |
2012-05-12 |
Amit Daniel Kachhap |
|
New |
| [v4,1/5] thermal: Add generic cpufreq cooling implementation |
2012-05-12 |
Amit Daniel Kachhap |
|
New |
| [v4,3/5] thermal: exynos5: Add exynos5 thermal sensor driver support |
2012-05-12 |
Amit Daniel Kachhap |
|
New |
| [v4,4/5] thermal: exynos: Register the tmu sensor with the kernel thermal layer |
2012-05-12 |
Amit Daniel Kachhap |
|
New |
| [v3,1/5,SCSI] ufshcd: UFS Host controller driver |
2012-02-29 |
Santosh Yaraganavi |
|
New |
| [v3,2/5,SCSI] ufshcd: UFS UTP Transfer requests handling |
2012-02-29 |
Santosh Yaraganavi |
|
New |
| [v3,3/5,SCSI] ufshcd: UFSHCI error handling |
2012-02-29 |
Santosh Yaraganavi |
|
New |
| [v3,4/5,SCSI] ufshcd: SCSI error handling |
2012-02-29 |
Santosh Yaraganavi |
|
New |
| [v3,5/5] Documentation: UFS Host Controller Driver |
2012-02-29 |
Santosh Yaraganavi |
|
New |
| [V6,1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210 |
2012-02-23 |
Amit Daniel Kachhap |
|
New |
| [v4,1/2] ARM: Exynos: Add irq_domain support for interrupt combiner |
2012-02-21 |
thomas.abraham@linaro.org |
|
New |
| [v4,2/2] ARM: Exynos: Add device tree support for interrupt combiner |
2012-02-21 |
thomas.abraham@linaro.org |
|
New |
| [V6,1/5] ARM: exynos: Add support AFTR mode on EXYNOS4210 |
2012-02-21 |
Amit Daniel Kachhap |
|
New |
| [RFC] tracing/rcu: Add trace_##name##__rcuidle() static tracepoint for inside rcu_idle_exit() sections |
2012-02-06 |
Steven Rostedt |
|
New |
| [v3,1/4] ARM: Exynos4: Simplify EINT number to linux irq number translation |
2012-02-22 |
thomas.abraham@linaro.org |
|
New |
| [v3,2/4] ARM: Exynos4: Add irq_domain support for gpio wakeup interrupts |
2012-02-22 |
thomas.abraham@linaro.org |
|
New |
| [V6,2/5] ARM: s5p: add L2 early resume code |
2012-02-21 |
Amit Daniel Kachhap |
|
New |
| [V6,3/5] ARM: exynos: save L2 settings during bootup |
2012-02-21 |
Amit Daniel Kachhap |
|
New |
| [V6,4/5] ARM: exynos: remove useless code to save/restore L2 |
2012-02-21 |
Amit Daniel Kachhap |
|
New |
| [V6,5/5] ARM: exynos: Enable l2 configuration through device tree |
2012-02-21 |
Amit Daniel Kachhap |
|
New |
| [v3,3/4] ARM: Exynos4: Remove arch_initcall for wakeup interrupt initialization |
2012-02-22 |
thomas.abraham@linaro.org |
|
New |
| [1/4] thermal: exynos: Add thermal interface support for linux thermal layer |
2012-03-03 |
Amit Daniel Kachhap |
|
New |
| [v4,2/5] ARM: dts: Add lcd pinctrl node entries for EXYNOS4412 SoC |
2013-02-15 |
Vikas C Sajjan |
|
New |
| [3/4] thermal: exynos4: Register the tmu sensor with the thermal interface layer |
2012-03-03 |
Amit Daniel Kachhap |
|
New |
| [v2] ARM: EXYNOS: Add WLAN init on ORIGEN |
2012-02-27 |
Sangwook |
|
New |
| [3/3] ARM: Exynos: Rework platform data for lcd controller for Origen board |
2012-03-03 |
thomas.abraham@linaro.org |
|
New |
| [2/6] ARM: dts: Add MFC codec support for Exynos4 DT machines |
2013-01-29 |
Sylwester Nawrocki |
|
New |
| [2/4] hwmon: exynos4: Move thermal sensor driver to driver/mfd directory |
2012-03-03 |
Amit Daniel Kachhap |
|
New |
| [1/3] video: s3c-fb: move video interface timing out of window setup data |
2012-03-03 |
thomas.abraham@linaro.org |
|
New |
| [4/4] ARM: exynos4: Add thermal sensor driver platform device support |
2012-03-03 |
Amit Daniel Kachhap |
|
New |
| [2/3] video: s3c-fb: remove 'default_win' element from platform data |
2012-03-03 |
thomas.abraham@linaro.org |
|
New |
| [v4,4/5] ARM: dts: add FIMD AUXDATA node entry for exynos4 DT |
2013-02-15 |
Vikas C Sajjan |
|
New |
| [V2,1/6] thermal: Add a new trip type to use cooling device instance number |
2012-03-19 |
Amit Daniel Kachhap |
|
New |
| [v3,0/5,SCSI] ufshcd: UFS Host Controller Driver |
2012-03-22 |
James Bottomley |
|
New |
| [v4,1/4] ARM: Exynos: Simplify the wakeup interrupt setup code |
2012-03-24 |
thomas.abraham@linaro.org |
|
New |
| [v4,3/4] ARM: Exynos: Remove arch_initcall for wakeup interrupt initialization |
2012-03-24 |
thomas.abraham@linaro.org |
|
New |
| ARM: exynos: Adapt to cpuidle core time keeping and irq enable |
2012-04-25 |
Amit Daniel Kachhap |
|
New |
| [v4,5/5] ARM: exynos: Add thermal sensor driver platform data support |
2012-05-12 |
Amit Daniel Kachhap |
|
New |
| [1/2] ARM: dts: Add pinctrl node entries for Samsung Exynos4210 SoC |
2012-08-15 |
thomas.abraham@linaro.org |
|
New |
| [2/2] ARM: EXYNOS: Enable PINCTRL config option for Exynos4 device tree enabled platform |
2012-08-15 |
thomas.abraham@linaro.org |
|
New |
| ARM: dts: use generic mmc properties for Samsung Exynos4210 sdhci nodes |
2012-08-16 |
thomas.abraham@linaro.org |
|
New |
| ARM: EXYNOS: Keep USB related LDOs always active on Origen |
2013-02-22 |
Tushar Behera |
|
New |
| [1/1] ARM: EXYNOS: Fix compilation warning in setup-usb-phy.c file |
2012-07-12 |
Kukjin Kim |
|
New |
| [v2,1/2] ARM: dts: Add pinctrl node entries for Samsung Exynos4210 SoC |
2012-08-23 |
thomas.abraham@linaro.org |
|
New |
| [v2,2/2] ARM: EXYNOS: Enable pinctrl driver support for Exynos4 device tree enabled platform |
2012-08-23 |
thomas.abraham@linaro.org |
|
New |
| arm: exynos4: Fix suspend/resume hang |
2013-01-11 |
Inderpal Singh |
|
New |
| arm: plat-samsung: check soc ids before l2x0 cache restoration in resume |
2013-01-22 |
Inderpal Singh |
|
New |
| [v2,4/4] DMA: PL330: unregister dma_device in module's remove function |
2012-10-05 |
Inderpal Singh |
|
New |
| [v6,1/5] ARM: dts: Add FIMD node to exynos4 |
2013-02-28 |
Vikas C Sajjan |
|
New |
| [1/3] DMA: PL330: Free memory allocated for peripheral channels |
2012-09-25 |
Inderpal Singh |
|
New |
| [2/3] DMA: PL330: Change allocation method to properly free DMA descriptors |
2012-09-25 |
Inderpal Singh |
|
New |
| [3/3] DMA: PL330: Balance module remove function with probe |
2012-09-25 |
Inderpal Singh |
|
New |
| [v7,4/5] ARM: dts: Add FIMD AUXDATA node entry for exynos4 DT |
2013-03-13 |
Vikas C Sajjan |
|
New |
| [v2,1/4] DMA: PL330: Free memory allocated for peripheral channels |
2012-10-05 |
Inderpal Singh |
|
New |
| [v2,2/4] DMA: PL330: Change allocation method to properly free DMA descriptors |
2012-10-05 |
Inderpal Singh |
|
New |
| [v2,3/4] DMA: PL330: Balance module remove function with probe |
2012-10-05 |
Inderpal Singh |
|
New |
| [v8,1/4] ARM: dts: Add FIMD node to exynos4 |
2013-03-19 |
Vikas C Sajjan |
|
New |
| DMA: PL330: Add runtime pm support |
2012-10-17 |
Inderpal Singh |
|
New |
| ARM: dts: add interrupt-names property to get interrupt resource by name |
2013-03-13 |
Vikas C Sajjan |
|
New |
| [v6,2/5] ARM: dts: Add lcd pinctrl node entries for EXYNOS4412 SoC |
2013-02-28 |
Vikas C Sajjan |
|
New |
| [v6,4/5] ARM: dts: Add FIMD AUXDATA node entry for exynos4 DT |
2013-02-28 |
Vikas C Sajjan |
|
New |
| [v10,1/3] ARM: dts: Add FIMD node to exynos4 |
2013-04-01 |
Vikas C Sajjan |
|
New |
| [v7,2/5] ARM: dts: Add lcd pinctrl node entries for EXYNOS4412 SoC |
2013-03-13 |
Vikas C Sajjan |
|
New |
| [V3,2/7] ARM: dts: Add disable-wp for card slot on exynos5250-arndale |
2013-04-02 |
Tushar Behera |
|
New |