diff mbox series

[2/4] tty: serial: samsung: Properly set flags in autoCTS mode

Message ID 20181214112325.9551-3-m.szyprowski@samsung.com
State New
Headers show
Series TM2(e): add Bluetooth support | expand

Commit Message

Marek Szyprowski Dec. 14, 2018, 11:23 a.m. UTC
From: Beomho Seo <beomho.seo@samsung.com>


Commit 391f93f2ec9f ("serial: core: Rework hw-assited flow control support")
has changed the way the autoCTS mode is handled.

According to that change, serial drivers which enable H/W autoCTS mode must
set UPSTAT_AUTOCTS to prevent the serial core from inadvertently disabling
TX. This patch adds proper handling of UPSTAT_AUTOCTS flag.

Signed-off-by: Beomho Seo <beomho.seo@samsung.com>

[mszyprow: rephrased commit message]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

---
 drivers/tty/serial/samsung.c | 3 +++
 1 file changed, 3 insertions(+)

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index da1bd4bba8a9..2a49b6d876b8 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1365,11 +1365,14 @@  static void s3c24xx_serial_set_termios(struct uart_port *port,
 	wr_regl(port, S3C2410_ULCON, ulcon);
 	wr_regl(port, S3C2410_UBRDIV, quot);
 
+	port->status &= ~UPSTAT_AUTOCTS;
+
 	umcon = rd_regl(port, S3C2410_UMCON);
 	if (termios->c_cflag & CRTSCTS) {
 		umcon |= S3C2410_UMCOM_AFC;
 		/* Disable RTS when RX FIFO contains 63 bytes */
 		umcon &= ~S3C2412_UMCON_AFC_8;
+		port->status = UPSTAT_AUTOCTS;
 	} else {
 		umcon &= ~S3C2410_UMCOM_AFC;
 	}