diff mbox series

[v4,07/10] scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 5 and newer

Message ID 1700728577-14729-8-git-send-email-quic_cang@quicinc.com
State Superseded
Headers show
Series Enable HS-G5 support on SM8550 | expand

Commit Message

Can Guo Nov. 23, 2023, 8:36 a.m. UTC
Set the initial PHY gear to max HS gear for hosts with HW ver 5 and newer.

This patch is not changing any functionalities or logic but only a
preparation patch for the next patch in this series.

Signed-off-by: Can Guo <quic_cang@quicinc.com>
---
 drivers/ufs/host/ufs-qcom.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 6756f8d..7bbccf4 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -1067,6 +1067,20 @@  static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
 		hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH;
 }
 
+static void ufs_qcom_set_phy_gear(struct ufs_qcom_host *host)
+{
+	struct ufs_host_params *host_params = &host->host_params;
+
+	host->phy_gear = host_params->hs_tx_gear;
+
+	/*
+	 * Power up the PHY using the minimum supported gear (UFS_HS_G2).
+	 * Switching to max gear will be performed during reinit if supported.
+	 */
+	if (host->hw_ver.major < 0x5)
+		host->phy_gear = UFS_HS_G2;
+}
+
 static void ufs_qcom_set_host_params(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@@ -1303,6 +1317,7 @@  static int ufs_qcom_init(struct ufs_hba *hba)
 	ufs_qcom_set_caps(hba);
 	ufs_qcom_advertise_quirks(hba);
 	ufs_qcom_set_host_params(hba);
+	ufs_qcom_set_phy_gear(host);
 
 	err = ufs_qcom_ice_init(host);
 	if (err)
@@ -1320,12 +1335,6 @@  static int ufs_qcom_init(struct ufs_hba *hba)
 		dev_warn(dev, "%s: failed to configure the testbus %d\n",
 				__func__, err);
 
-	/*
-	 * Power up the PHY using the minimum supported gear (UFS_HS_G2).
-	 * Switching to max gear will be performed during reinit if supported.
-	 */
-	host->phy_gear = UFS_HS_G2;
-
 	return 0;
 
 out_variant_clear: