diff mbox series

[v12,15/20] scsi: sd: Have pr commands retry UAs

Message ID 20231114013750.76609-16-michael.christie@oracle.com
State Superseded
Headers show
Series scsi: Allow scsi_execute users to request retries | expand

Commit Message

Mike Christie Nov. 14, 2023, 1:37 a.m. UTC
It's common to get a UA when doing PR commands. It could be due to a
target restarting, transport level relogin or other PR commands like a
release causing it. The upper layers don't get the sense and in some cases
have no idea if it's a SCSI device, so this has the sd layer retry.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
---
 drivers/scsi/sd.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
diff mbox series

Patch

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 0d73145430a4..87a8feabc2b4 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1800,8 +1800,22 @@  static int sd_pr_in_command(struct block_device *bdev, u8 sa,
 	struct scsi_device *sdev = sdkp->device;
 	struct scsi_sense_hdr sshdr;
 	u8 cmd[10] = { PERSISTENT_RESERVE_IN, sa };
+	struct scsi_failure failure_defs[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = 5,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{}
+	};
+	struct scsi_failures failures = {
+		.failure_definitions = failure_defs,
+	};
 	const struct scsi_exec_args exec_args = {
 		.sshdr = &sshdr,
+		.failures = &failures,
 	};
 	int result;
 
@@ -1888,8 +1902,22 @@  static int sd_pr_out_command(struct block_device *bdev, u8 sa, u64 key,
 	struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
 	struct scsi_device *sdev = sdkp->device;
 	struct scsi_sense_hdr sshdr;
+	struct scsi_failure failure_defs[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = 5,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{}
+	};
+	struct scsi_failures failures = {
+		.failure_definitions = failure_defs,
+	};
 	const struct scsi_exec_args exec_args = {
 		.sshdr = &sshdr,
+		.failures = &failures,
 	};
 	int result;
 	u8 cmd[16] = { 0, };