diff mbox series

[v3,19/19] arm64: dts: imx8mq-zii-ultra: Add hog suffixes to GPIO hogs

Message ID 20200825193536.7332-20-krzk@kernel.org
State Superseded
Headers show
Series [v3,01/19] dt-bindings: gpio: fsl-imx-gpio: Add i.MX 8 compatibles | expand

Commit Message

Krzysztof Kozlowski Aug. 25, 2020, 7:35 p.m. UTC
According to device tree specification, device node names should be
somewhat generic and reflecting the function of the device so add the
"hog" suffixes to all GPIO hog nodes.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 0d1088dcaa02..fa7a041ffcfd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -229,28 +229,28 @@ 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio3_hog>;
 
-	usb-emulation {
+	usb-emulation-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "usb-emulation";
 	};
 
-	usb-mode1 {
+	usb-mode1-hog {
 		gpio-hog;
 		gpios = <11 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "usb-mode1";
 	};
 
-	usb-pwr {
+	usb-pwr-hog {
 		gpio-hog;
 		gpios = <12 GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "usb-pwr-ctrl-en-n";
 	};
 
-	usb-mode2 {
+	usb-mode2-hog {
 		gpio-hog;
 		gpios = <13 GPIO_ACTIVE_HIGH>;
 		output-high;