@@ -34,14 +34,25 @@
/* Offsets for the DesignWare specific registers */
#define DW_UART_USR 0x1f /* UART Status Register */
+#define DW_UART_DMASA 0xa8 /* DMA Software Ack */
+#define RZN1_UART_TDMACR 0x10c /* DMA Control Register Transmit Mode */
+#define RZN1_UART_RDMACR 0x110 /* DMA Control Register Receive Mode */
/* DesignWare specific register fields */
#define DW_UART_MCR_SIRE BIT(6)
+/* Renesas specific register fields */
+#define RZN1_UART_xDMACR_DMA_EN BIT(0)
+#define RZN1_UART_xDMACR_1_WORD_BURST (0 << 1)
+#define RZN1_UART_xDMACR_4_WORD_BURST (1 << 1)
+#define RZN1_UART_xDMACR_8_WORD_BURST (3 << 1)
+#define RZN1_UART_xDMACR_BLK_SZ(x) ((x) << 3)
+
/* Quirks */
#define DW_UART_QUIRK_OCTEON BIT(0)
#define DW_UART_QUIRK_ARMADA_38X BIT(1)
#define DW_UART_QUIRK_SKIP_SET_RATE BIT(2)
+#define DW_UART_QUIRK_IS_DMA_FLOW_CONTROLLER BIT(3)
static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data)
{
@@ -225,6 +236,7 @@ static unsigned int dw8250_serial_in32be(struct uart_port *p, int offset)
static int dw8250_handle_irq(struct uart_port *p)
{
+ const struct dw8250_platform_data *pdata = device_get_match_data(p->dev);
struct uart_8250_port *up = up_to_u8250p(p);
struct dw8250_data *d = to_dw8250_data(p->private_data);
unsigned int iir = p->serial_in(p, UART_IIR);
@@ -252,6 +264,16 @@ static int dw8250_handle_irq(struct uart_port *p)
spin_unlock_irqrestore(&p->lock, flags);
}
+ /* Manually stop the Rx DMA transfer when acting as flow controller */
+ if (up->dma && up->dma->rx_running && rx_timeout && pdata &&
+ pdata->quirks & DW_UART_QUIRK_IS_DMA_FLOW_CONTROLLER) {
+ status = p->serial_in(p, UART_LSR);
+ if (status & (UART_LSR_DR | UART_LSR_BI)) {
+ writel(0, p->membase + RZN1_UART_RDMACR);
+ writel(1, p->membase + DW_UART_DMASA);
+ }
+ }
+
if (serial8250_handle_irq(p, iir))
return 1;
@@ -375,6 +397,42 @@ static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
return param == chan->device->dev;
}
+static u32 dw8250_rzn1_get_dmacr_burst(int max_burst)
+{
+ if (max_burst >= 8)
+ return RZN1_UART_xDMACR_8_WORD_BURST;
+ else if (max_burst >= 4)
+ return RZN1_UART_xDMACR_4_WORD_BURST;
+ else
+ return RZN1_UART_xDMACR_1_WORD_BURST;
+}
+
+static void dw8250_prepare_tx_dma(struct uart_8250_port *p)
+{
+ struct uart_port *up = &p->port;
+ struct uart_8250_dma *dma = p->dma;
+ u32 val;
+
+ writel(0, up->membase + RZN1_UART_TDMACR);
+ val = dw8250_rzn1_get_dmacr_burst(dma->txconf.dst_maxburst) |
+ RZN1_UART_xDMACR_BLK_SZ(dma->tx_size) |
+ RZN1_UART_xDMACR_DMA_EN;
+ writel(val, up->membase + RZN1_UART_TDMACR);
+}
+
+static void dw8250_prepare_rx_dma(struct uart_8250_port *p)
+{
+ struct uart_port *up = &p->port;
+ struct uart_8250_dma *dma = p->dma;
+ u32 val;
+
+ writel(0, up->membase + RZN1_UART_RDMACR);
+ val = dw8250_rzn1_get_dmacr_burst(dma->rxconf.src_maxburst) |
+ RZN1_UART_xDMACR_BLK_SZ(dma->rx_size) |
+ RZN1_UART_xDMACR_DMA_EN;
+ writel(val, up->membase + RZN1_UART_RDMACR);
+}
+
static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
{
struct device_node *np = p->dev->of_node;
@@ -409,6 +467,12 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
p->serial_out = dw8250_serial_out38x;
if (quirks & DW_UART_QUIRK_SKIP_SET_RATE)
p->set_termios = dw8250_do_set_termios;
+ if (quirks & DW_UART_QUIRK_IS_DMA_FLOW_CONTROLLER) {
+ data->data.dma.txconf.device_fc = 1;
+ data->data.dma.rxconf.device_fc = 1;
+ data->data.dma.prepare_tx_dma = dw8250_prepare_tx_dma;
+ data->data.dma.prepare_rx_dma = dw8250_prepare_rx_dma;
+ }
} else if (acpi_dev_present("APMC0D08", NULL, -1)) {
p->iotype = UPIO_MEM32;