diff mbox series

[v6,3/3] spi: dt-bindings: document zero value for spi-{rx,tx}-bus-width properties

Message ID 20201221152936.53873-3-alexandru.ardelean@analog.com
State Superseded
Headers show
Series [v6,1/3] spi: uapi: unify SPI modes into a single spi.h header | expand

Commit Message

Alexandru Ardelean Dec. 21, 2020, 3:29 p.m. UTC
Following a change to the SPI framework, providing a value of zero for
'spi-rx-bus-width' and 'spi-tx-bus-width' is now possible and will
essentially mean that no RX or TX is allowed.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---

Changelog v5 -> v6:
* https://patchwork.kernel.org/project/spi-devel-general/patch/20201221141906.48922-3-alexandru.ardelean@analog.com/
* no change

 Documentation/devicetree/bindings/spi/spi-controller.yaml | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 5f505810104d..06786f1b43d2 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -152,8 +152,9 @@  patternProperties:
       spi-rx-bus-width:
         description:
           Bus width to the SPI bus used for read transfers.
+          If 0 is provided, then no RX will be possible on this device.
         $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [1, 2, 4, 8]
+        enum: [0, 1, 2, 4, 8]
         default: 1
 
       spi-rx-delay-us:
@@ -163,8 +164,9 @@  patternProperties:
       spi-tx-bus-width:
         description:
           Bus width to the SPI bus used for write transfers.
+          If 0 is provided, then no TX will be possible on this device.
         $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [1, 2, 4, 8]
+        enum: [0, 1, 2, 4, 8]
         default: 1
 
       spi-tx-delay-us: