From patchwork Sat Apr 2 18:40:08 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 555996 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 13F95C43217 for ; Sat, 2 Apr 2022 18:41:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1356884AbiDBSmt (ORCPT ); Sat, 2 Apr 2022 14:42:49 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40594 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355756AbiDBSme (ORCPT ); Sat, 2 Apr 2022 14:42:34 -0400 Received: from mail-wr1-x436.google.com (mail-wr1-x436.google.com [IPv6:2a00:1450:4864:20::436]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2FAB54EA09 for ; Sat, 2 Apr 2022 11:40:25 -0700 (PDT) Received: by mail-wr1-x436.google.com with SMTP id r13so8574427wrr.9 for ; Sat, 02 Apr 2022 11:40:25 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=8UQnzpzJ7atASYcdmmpmKJN+w3hsF0/X9rG8MRnHqSQ=; b=sJkGlXQ6t/GZu/niHOpOZmjDOll5gznf77yzZ+d3nFHFi9zhmIBYWzO8zJm1lUtvHj mokqESv8EymQtzEj4HdDpdh2imD09qSWclAOV5dBnXy4uA+tnXRLnjsm8L52Jrcz1aBD kft5rp5Ubmhhn8OQ0zGKHEb/EyaRcr/tlJodiNTpHbeCiPHltu97uL/1OlqRkY4079Ap PPg1j02nGQGh2DU4qKEIpT+GG18rbfHnbmqU64fyVrAwR6ypo8aNywPOWJvt4ri3a6+U xDyAB98bBcx+xekpEefl5Ep6auS2KksQI4H1HtBOtqA38NlidZDO3ztz35Os8Cy+EN0Q pISg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=8UQnzpzJ7atASYcdmmpmKJN+w3hsF0/X9rG8MRnHqSQ=; b=2np1HY6YZUi82aQL/ffri/QK0dX5LME04oEN+f1noc8A2SoTjOXCZsF0d5J2HbJYEC qZJXHh/Nl08oYI6pOQuI3yQLmRxTB5gYgGcM1jVg8hBeXCjbtMDokcIr4ZxXZVUITsix yE+ZtctePst1YuhZoC2LGLpHdIVOeR7cjcZWcKGyigihBccljx01kMUPxBLdopS1Zd+7 SnOoYMMQfia3lUBc/pJh5osfvqt0qtR9vL3FT3RCN+gv9op1YHQZ8mvF1B5J0NElMFul NWG1sae1M+R6R4lEKnWavf1gUhGJ7ub9IXOjd8oWuO4M81zFF7RokWhDo73GdC7Cwr4U LTPQ== X-Gm-Message-State: AOAM532qkFiStufWfFReUE0WtBFUZ4gLYgOurqDBRe5gjbXWmijYhxSt JyuHd0J/RtURVF8Dngr2F+/j1g== X-Google-Smtp-Source: ABdhPJzgfFjUaD8MoK9zh4Fy6hmHDi8obj/pudrAdpzyXg8ImEW0WyON+B6gInWAdwqVSGua/RsS/A== X-Received: by 2002:a5d:5111:0:b0:205:a1aa:ab71 with SMTP id s17-20020a5d5111000000b00205a1aaab71mr11786912wrt.67.1648924823523; Sat, 02 Apr 2022 11:40:23 -0700 (PDT) Received: from localhost.localdomain (xdsl-188-155-201-27.adslplus.ch. [188.155.201.27]) by smtp.gmail.com with ESMTPSA id m20-20020a05600c4f5400b0038b5162260csm6760502wmq.23.2022.04.02.11.40.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 02 Apr 2022 11:40:23 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Greg Kroah-Hartman , Mark Brown , linux-arm-msm@vger.kernel.org, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, linux-spi@vger.kernel.org Cc: Kuldeep Singh , Krzysztof Kozlowski Subject: [PATCH v3 6/9] spi: dt-bindings: qcom,spi-qup: convert to dtschema Date: Sat, 2 Apr 2022 20:40:08 +0200 Message-Id: <20220402184011.132465-7-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220402184011.132465-1-krzysztof.kozlowski@linaro.org> References: <20220402184011.132465-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org Convert the Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) bindings to DT Schema. Signed-off-by: Krzysztof Kozlowski Acked-by: Kuldeep Singh Reviewed-by: Rob Herring --- .../devicetree/bindings/spi/qcom,spi-qup.txt | 103 ------------------ .../devicetree/bindings/spi/qcom,spi-qup.yaml | 81 ++++++++++++++ 2 files changed, 81 insertions(+), 103 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.txt create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt deleted file mode 100644 index 5c090771c016..000000000000 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +++ /dev/null @@ -1,103 +0,0 @@ -Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) - -The QUP core is an AHB slave that provides a common data path (an output FIFO -and an input FIFO) for serial peripheral interface (SPI) mini-core. - -SPI in master mode supports up to 50MHz, up to four chip selects, programmable -data path from 4 bits to 32 bits and numerous protocol variants. - -Required properties: -- compatible: Should contain: - "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064. - "qcom,spi-qup-v2.1.1" for 8974 and later - "qcom,spi-qup-v2.2.1" for 8974 v2 and later. - -- reg: Should contain base register location and length -- interrupts: Interrupt number used by this controller - -- clocks: Should contain the core clock and the AHB clock. -- clock-names: Should be "core" for the core clock and "iface" for the - AHB clock. - -- #address-cells: Number of cells required to define a chip select - address on the SPI bus. Should be set to 1. -- #size-cells: Should be zero. - -Optional properties: -- spi-max-frequency: Specifies maximum SPI clock frequency, - Units - Hz. Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt -- num-cs: total number of chipselects -- cs-gpios: should specify GPIOs used for chipselects. - The gpios will be referred to as reg = in the SPI child - nodes. If unspecified, a single SPI device without a chip - select can be used. - -- dmas: Two DMA channel specifiers following the convention outlined - in bindings/dma/dma.txt -- dma-names: Names for the dma channels, if present. There must be at - least one channel named "tx" for transmit and named "rx" for - receive. - -SPI slave nodes must be children of the SPI master node and can contain -properties described in Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - - spi_8: spi@f9964000 { /* BLSP2 QUP2 */ - - compatible = "qcom,spi-qup-v2"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xf9964000 0x1000>; - interrupts = <0 102 0>; - spi-max-frequency = <19200000>; - - clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - - dmas = <&blsp1_bam 13>, <&blsp1_bam 12>; - dma-names = "rx", "tx"; - - pinctrl-names = "default"; - pinctrl-0 = <&spi8_default>; - - device@0 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <19200000>; - spi-cpol; - }; - - device@1 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <1>; /* Chip select 1 */ - spi-max-frequency = <9600000>; - spi-cpha; - }; - - device@2 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <2>; /* Chip select 2 */ - spi-max-frequency = <19200000>; - spi-cpol; - spi-cpha; - }; - - device@3 { - compatible = "arm,pl022-dummy"; - #address-cells = <1>; - #size-cells = <1>; - reg = <3>; /* Chip select 3 */ - spi-max-frequency = <19200000>; - spi-cpol; - spi-cpha; - spi-cs-high; - }; - }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml new file mode 100644 index 000000000000..93f14dd01afc --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/qcom,spi-qup.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) + +maintainers: + - Andy Gross + - Bjorn Andersson + - Krzysztof Kozlowski + +description: + The QUP core is an AHB slave that provides a common data path (an output FIFO + and an input FIFO) for serial peripheral interface (SPI) mini-core. + + SPI in master mode supports up to 50MHz, up to four chip selects, + programmable data path from 4 bits to 32 bits and numerous protocol variants. + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + enum: + - qcom,spi-qup-v1.1.1 # for 8660, 8960 and 8064 + - qcom,spi-qup-v2.1.1 # for 8974 and later + - qcom,spi-qup-v2.2.1 # for 8974 v2 and later + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: iface + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + + spi@7575000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07575000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_spi1_default>; + pinctrl-1 = <&blsp1_spi1_sleep>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + };