@@ -368,6 +368,9 @@ static bool amd_spi_supports_op(struct spi_mem *mem,
op->data.buswidth > 1 || op->data.nbytes > AMD_SPI_MAX_DATA)
return false;
+ if (op->max_freq < AMD_SPI_MIN_HZ)
+ return false;
+
return spi_mem_default_supports_op(mem, op);
}
@@ -443,7 +446,7 @@ static int amd_spi_exec_mem_op(struct spi_mem *mem,
amd_spi = spi_controller_get_devdata(mem->spi->controller);
- ret = amd_set_spi_freq(amd_spi, mem->spi->max_speed_hz);
+ ret = amd_set_spi_freq(amd_spi, op->max_freq);
if (ret)
return ret;
@@ -469,6 +472,10 @@ static const struct spi_controller_mem_ops amd_spi_mem_ops = {
.supports_op = amd_spi_supports_op,
};
+static const struct spi_controller_mem_caps amd_spi_mem_caps = {
+ .per_op_freq = true,
+};
+
static int amd_spi_host_transfer(struct spi_controller *host,
struct spi_message *msg)
{
@@ -521,6 +528,7 @@ static int amd_spi_probe(struct platform_device *pdev)
host->setup = amd_spi_host_setup;
host->transfer_one_message = amd_spi_host_transfer;
host->mem_ops = &amd_spi_mem_ops;
+ host->mem_caps = &amd_spi_mem_caps;
host->max_transfer_size = amd_spi_max_transfer_size;
host->max_message_size = amd_spi_max_transfer_size;
Every ->exec_op() call correctly configures the spi bus speed to the maximum allowed frequency for the memory using the constant spi default parameter. Since we can now have per-operation constraints, let's use the value that comes from the spi-mem operation structure instead. In case there is no specific limitation for this operation, the default spi device value will be given anyway. This controller however performed a frequency check, which is also observed during the ->check_op() phase. The per-operation frequency capability is thus advertised to the spi-mem core. Cc: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/spi/spi-amd.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)