From patchwork Wed Apr 3 02:04:39 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrew Jeffery X-Patchwork-Id: 786460 Received: from codeconstruct.com.au (pi.codeconstruct.com.au [203.29.241.158]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 4DE5B168A8; Wed, 3 Apr 2024 02:04:51 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=203.29.241.158 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1712109893; cv=none; b=enDdzVUPBFiGzZqoFx2ijNfg9HpjoRpFowgMxfWuvOvvm++e7a901F3GPvjkvlQjmDXbBN0FfZ5DnfGuz6mrMQkOBqjmbzWEyhUjL8+QDUS/Stub70+kVluionB/XIG20kc9p56CPXXACrSlHmbkexM8PlGa/8Aq7Wqi+ia6Q2U= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1712109893; c=relaxed/simple; bh=rX8gIwLzj9i+NrbHgx/4MPN8g2hbR2CC7BqbS9FNum8=; h=From:To:Cc:Subject:Date:Message-Id:MIME-Version; b=QRqlddajuwfi/byKiu49VfxV2D2bcGRQcPgmNymLYCZJHBMb0uuupr5XM/VQ/8VQAF52SzN2dbnzPDLcG4ck25+UVT427bmsFPnkOc49gmY87BTXt/j3HcBgw/aG6DpyEbJPf0BcyWYNNtryfDaALguAJJqczhGtJbr5kZOy8qE= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=codeconstruct.com.au; spf=pass smtp.mailfrom=codeconstruct.com.au; dkim=pass (2048-bit key) header.d=codeconstruct.com.au header.i=@codeconstruct.com.au header.b=h2JCCK1U; arc=none smtp.client-ip=203.29.241.158 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=codeconstruct.com.au Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=codeconstruct.com.au Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=codeconstruct.com.au header.i=@codeconstruct.com.au header.b="h2JCCK1U" Received: from localhost.localdomain (ppp118-210-182-70.adl-adc-lon-bras34.tpg.internode.on.net [118.210.182.70]) by mail.codeconstruct.com.au (Postfix) with ESMTPSA id 78DE920075; Wed, 3 Apr 2024 10:04:47 +0800 (AWST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=codeconstruct.com.au; s=2022a; t=1712109889; bh=CHtl7bWOPaZNTF6/vPau0ikdHIEDo+eVR2BRd+QNipc=; h=From:To:Cc:Subject:Date; b=h2JCCK1UiiDcyJg4DhhddJ1AEGre8Z0Wt4UJPXPxaOlOw0RcsmJ9xxIy+trwNDGJ0 dOp0JE76UyotLGcZ7FYl5hY0SKZ0IhO+sRA/GGCR3KW1J11dCfMtEQ6CemtmCIGWZa cAioct+O/kcLkXHJDzLe4c9ECiPo2e6+4tgkHXKd2+snYlEgXBcorkTJ9qWIALYim7 weGb5qpMQgMY71Ys61A1rHRpLLUmkRHIa9rU8eXNJ7uOH9g4Vdk5vYbE2vjtjT0WlL AligKszqy0ktKNNNtuBloGsyC7nMfYDV+VYKi+caDcq1mrOr7XTLQMHeSaKSb9fgEx bpUPEwDEdNsFQ== From: Andrew Jeffery To: wim@linux-watchdog.org, linux@roeck-us.net Cc: Andrew Jeffery , robh@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, joel@jms.id.au, zev@bewilderbeest.net, linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org Subject: [PATCH v2] dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema Date: Wed, 3 Apr 2024 12:34:39 +1030 Message-Id: <20240403020439.418788-1-andrew@codeconstruct.com.au> X-Mailer: git-send-email 2.39.2 Precedence: bulk X-Mailing-List: linux-watchdog@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Squash warnings such as: ``` arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/watchdog@1e785000: failed to match any schema with compatible: ['aspeed,ast2400-wdt'] ``` The schema binding additionally defines the clocks property over the prose binding to align with use of the node in the DTS files. Signed-off-by: Andrew Jeffery --- v2: Address feedback from Rob and Zev - Rob: https://lore.kernel.org/linux-watchdog/20240402180718.GA358505-robh@kernel.org/ - Zev: https://lore.kernel.org/linux-watchdog/65722a59-2e94-4616-81e1-835615b0e600@hatter.bewilderbeest.net/ v1: https://lore.kernel.org/linux-watchdog/20240402120118.282035-1-andrew@codeconstruct.com.au/ .../bindings/watchdog/aspeed,ast2400-wdt.yaml | 142 ++++++++++++++++++ .../bindings/watchdog/aspeed-wdt.txt | 73 --------- 2 files changed, 142 insertions(+), 73 deletions(-) create mode 100644 Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml delete mode 100644 Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt diff --git a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml new file mode 100644 index 000000000000..be78a9865584 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed watchdog timer controllers + +maintainers: + - Andrew Jeffery + +properties: + compatible: + enum: + - aspeed,ast2400-wdt + - aspeed,ast2500-wdt + - aspeed,ast2600-wdt + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: > + The clock used to drive the watchdog counter. From the AST2500 no source + other than the 1MHz clock can be selected, so the clocks property is + optional. + + aspeed,reset-type: + $ref: /schemas/types.yaml#/definitions/string + enum: + - cpu + - soc + - system + - none + default: system + description: > + The watchdog can be programmed to generate one of three different types of + reset when a timeout occcurs. + + Specifying 'cpu' will only reset the processor on a timeout event. + + Specifying 'soc' will reset a configurable subset of the SoC's controllers + on a timeout event. Controllers critical to the SoC's operation may remain + untouched. The set of SoC controllers to reset may be specified via the + aspeed,reset-mask property if the node has the aspeed,ast2500-wdt or + aspeed,ast2600-wdt compatible. + + Specifying 'system' will reset all controllers on a timeout event, as if + EXTRST had been asserted. + + Specifying 'none' will cause the timeout event to have no reset effect. + Another watchdog engine on the chip must be used for chip reset operations. + + aspeed,alt-boot: + $ref: /schemas/types.yaml#/definitions/flag + description: > + Direct the watchdog to configure the SoC to boot from the alternative boot + region if a timeout occurs. + + aspeed,external-signal: + $ref: /schemas/types.yaml#/definitions/flag + description: > + Assert the timeout event on an external signal pin associated with the + watchdog controller instance. The pin must be muxed appropriately. + + aspeed,ext-pulse-duration: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The duration, in microseconds, of the pulse emitted on the external signal + pin. + + aspeed,ext-push-pull: + $ref: /schemas/types.yaml#/definitions/flag + description: > + If aspeed,external-signal is specified in the node, set the external + signal pin's drive type to push-pull. If aspeed,ext-push-pull is not + specified then the pin is configured as open-drain. + + aspeed,ext-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: > + If both aspeed,external-signal and aspeed,ext-push-pull are specified in + the node, set the pulse polarity to active-high. If aspeed,ext-active-high + is not specified then the pin is configured as active-low. + + aspeed,reset-mask: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + description: > + A bitmask indicating which peripherals will be reset if the watchdog + timer expires. On AST2500 SoCs this should be a single word defined using + the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word + array with the first word defined using the AST2600_WDT_RESET1_* macros, + and the second word defined using the AST2600_WDT_RESET2_* macros. + +required: + - compatible + - reg + +allOf: + - if: + anyOf: + - required: + - aspeed,ext-push-pull + - required: + - aspeed,ext-active-high + - required: + - aspeed,reset-mask + then: + properties: + compatible: + enum: + - aspeed,ast2500-wdt + - aspeed,ast2600-wdt + - if: + required: + - aspeed,ext-active-high + then: + required: + - aspeed,ext-push-pull + +additionalProperties: false + +examples: + - | + watchdog@1e785000 { + compatible = "aspeed,ast2400-wdt"; + reg = <0x1e785000 0x1c>; + aspeed,reset-type = "system"; + aspeed,external-signal; + }; + - | + #include + watchdog@1e785040 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785040 0x40>; + aspeed,reset-type = "soc"; + aspeed,reset-mask = ; + }; diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt deleted file mode 100644 index 3208adb3e52e..000000000000 --- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt +++ /dev/null @@ -1,73 +0,0 @@ -Aspeed Watchdog Timer - -Required properties: - - compatible: must be one of: - - "aspeed,ast2400-wdt" - - "aspeed,ast2500-wdt" - - "aspeed,ast2600-wdt" - - - reg: physical base address of the controller and length of memory mapped - region - -Optional properties: - - - aspeed,reset-type = "cpu|soc|system|none" - - Reset behavior - Whenever a timeout occurs the watchdog can be programmed - to generate one of three different, mutually exclusive, types of resets. - - Type "none" can be specified to indicate that no resets are to be done. - This is useful in situations where another watchdog engine on chip is - to perform the reset. - - If 'aspeed,reset-type=' is not specified the default is to enable system - reset. - - Reset types: - - - cpu: Reset CPU on watchdog timeout - - - soc: Reset 'System on Chip' on watchdog timeout - - - system: Reset system on watchdog timeout - - - none: No reset is performed on timeout. Assumes another watchdog - engine is responsible for this. - - - aspeed,alt-boot: If property is present then boot from alternate block. - - aspeed,external-signal: If property is present then signal is sent to - external reset counter (only WDT1 and WDT2). If not - specified no external signal is sent. - - aspeed,ext-pulse-duration: External signal pulse duration in microseconds - -Optional properties for AST2500-compatible watchdogs: - - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's - drive type to push-pull. The default is open-drain. - - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin - is configured as push-pull, then set the pulse - polarity to active-high. The default is active-low. - -Optional properties for AST2500- and AST2600-compatible watchdogs: - - aspeed,reset-mask: A bitmask indicating which peripherals will be reset if - the watchdog timer expires. On AST2500 this should be a - single word defined using the AST2500_WDT_RESET_* macros; - on AST2600 this should be a two-word array with the first - word defined using the AST2600_WDT_RESET1_* macros and the - second word defined using the AST2600_WDT_RESET2_* macros. - -Examples: - - wdt1: watchdog@1e785000 { - compatible = "aspeed,ast2400-wdt"; - reg = <0x1e785000 0x1c>; - aspeed,reset-type = "system"; - aspeed,external-signal; - }; - - #include - wdt2: watchdog@1e785040 { - compatible = "aspeed,ast2600-wdt"; - reg = <0x1e785040 0x40>; - aspeed,reset-mask = ; - };