mbox series

[v3,0/9] add 6GHz radio support in ath11k driver

Message ID 20200526224217.11119-1-pradeepc@codeaurora.org
Headers show
Series add 6GHz radio support in ath11k driver | expand

Message

Pradeep Kumar Chitrapu May 26, 2020, 10:42 p.m. UTC 
This patch series adds 6GHz frequency listing in ath11k driver and mac80211
registration for the 6GHz band. Also, extends some of wmi command tlvs for
supporting 6GHz.

In cfg80211, a helper function is added for identifying Preferred Scanning
Channels (PSC) in 6GHz band.

changes in v3:
 - cfg80211: remove PSC channel flag and instead add helper function.
 - Address differences in 6GHZ frequencies between IEEE P802.11ax/D6.0
   and IEEE P802.11ax/D6.1

changes in v2:
 - Fixed ath11k_phymode to be set in 6GHZ band

Pradeep Kumar Chitrapu (9):
  cfg80211: Add helper function to identify 6GHz PSC channel
  ath11k: add 6G frequency list supported by driver
  ath11k: add support for 6GHz radio in driver
  ath11k: Use freq instead of channel number in rx path
  ath11k: extend peer_assoc_cmd for 6GHz band
  ath11k: set psc channel flag when sending channel list to firmware.
  ath11k: Add 6G scan dwell time parameter in scan request command
  ath11k: Send multiple scan_chan_list messages if required
  ath11k: Add support for 6g scan hint

 drivers/net/wireless/ath/ath11k/core.h  |   6 +-
 drivers/net/wireless/ath/ath11k/dp_rx.c |   6 +-
 drivers/net/wireless/ath/ath11k/mac.c   | 174 +++++++++++++--
 drivers/net/wireless/ath/ath11k/reg.c   |   4 +
 drivers/net/wireless/ath/ath11k/wmi.c   | 269 +++++++++++++++++-------
 drivers/net/wireless/ath/ath11k/wmi.h   |  40 +++-
 include/net/cfg80211.h                  |  24 +++
 7 files changed, 425 insertions(+), 98 deletions(-)