diff mbox series

[v2,10/10] wcn36xx: Set feature DOT11AC for wcn3680

Message ID 20200829033846.2167619-11-bryan.odonoghue@linaro.org
State New
Headers show
Series wcn36xx: Add basic support for wcn3680 up to MCS7/40MHz | expand

Commit Message

Bryan O'Donoghue Aug. 29, 2020, 3:38 a.m. UTC 
In order for the firmware to process extended V1 parameters with the
addtional VHT fields added we need to first enable the feature bit DOT11AC.
Once done the version number in the HAL message header will be acted upon
by the firmware.

Extended V1 parameters are a prerequisite for 802.11ac speeds since we
cannot communicate VHT parameters to the firmware absent the extended data
structures.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
 drivers/net/wireless/ath/wcn36xx/smd.c | 2 ++
 1 file changed, 2 insertions(+)

-- 
2.27.0


_______________________________________________
wcn36xx mailing list
wcn36xx@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wcn36xx
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 9490b1bf4e05..4c30036e2e56 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -2084,6 +2084,8 @@  int wcn36xx_smd_feature_caps_exchange(struct wcn36xx *wcn)
 	INIT_HAL_MSG(msg_body, WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_REQ);
 
 	set_feat_caps(msg_body.feat_caps, STA_POWERSAVE);
+	if (wcn->rf_id == RF_IRIS_WCN3680)
+		set_feat_caps(msg_body.feat_caps, DOT11AC);
 
 	PREPARE_HAL_BUF(wcn->hal_buf, msg_body);