diff mbox series

[v3,6/7] wcn36xx: Add wcn36xx_smd_set_bss_vht_params()

Message ID 20200908182437.2870281-7-bryan.odonoghue@linaro.org
State Superseded
Headers show
Series wcn36xx: Add a set of helpers to enable VHT parameter passing | expand

Commit Message

Bryan O'Donoghue Sept. 8, 2020, 6:24 p.m. UTC
This commit adds wcn36xx_smd_set_bss_vht_params(). The job of this function
is to decide if the BSS is VHT capable and if so set the appropriate bit
in the BSS parameter structure for passing to the firmware.

VHT Channel width set is not set since we don't support 160MHz.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
 drivers/net/wireless/ath/wcn36xx/smd.c | 9 +++++++++
 1 file changed, 9 insertions(+)

-- 
2.27.0


_______________________________________________
wcn36xx mailing list
wcn36xx@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wcn36xx
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 14af98af42f3..fa6f5943a43d 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -146,6 +146,15 @@  static void wcn36xx_smd_set_bss_ht_params(struct ieee80211_vif *vif,
 	}
 }
 
+void
+wcn36xx_smd_set_bss_vht_params(struct ieee80211_vif *vif,
+			       struct ieee80211_sta *sta,
+			       struct wcn36xx_hal_config_bss_params_v1 *bss)
+{
+	if (sta && sta->vht_cap.vht_supported)
+		bss->vht_capable = 1;
+}
+
 static void wcn36xx_smd_set_sta_ht_params(struct ieee80211_sta *sta,
 		struct wcn36xx_hal_config_sta_params *sta_params)
 {