@@ -4429,44 +4429,6 @@ static bool iwl_mvm_rx_aux_roc(struct iwl_notif_wait_data *notif_wait,
return true;
}
-#define AUX_ROC_MIN_DURATION MSEC_TO_TU(100)
-#define AUX_ROC_MIN_DELAY MSEC_TO_TU(200)
-#define AUX_ROC_MAX_DELAY MSEC_TO_TU(600)
-#define AUX_ROC_SAFETY_BUFFER MSEC_TO_TU(20)
-#define AUX_ROC_MIN_SAFETY_BUFFER MSEC_TO_TU(10)
-
-static void iwl_mvm_roc_duration_and_delay(struct ieee80211_vif *vif,
- u32 duration_ms,
- u32 *duration_tu,
- u32 *delay)
-{
- u32 dtim_interval = vif->bss_conf.dtim_period *
- vif->bss_conf.beacon_int;
-
- *delay = AUX_ROC_MIN_DELAY;
- *duration_tu = MSEC_TO_TU(duration_ms);
-
- /*
- * If we are associated we want the delay time to be at least one
- * dtim interval so that the FW can wait until after the DTIM and
- * then start the time event, this will potentially allow us to
- * remain off-channel for the max duration.
- * Since we want to use almost a whole dtim interval we would also
- * like the delay to be for 2-3 dtim intervals, in case there are
- * other time events with higher priority.
- */
- if (vif->cfg.assoc) {
- *delay = min_t(u32, dtim_interval * 3, AUX_ROC_MAX_DELAY);
- /* We cannot remain off-channel longer than the DTIM interval */
- if (dtim_interval <= *duration_tu) {
- *duration_tu = dtim_interval - AUX_ROC_SAFETY_BUFFER;
- if (*duration_tu <= AUX_ROC_MIN_DURATION)
- *duration_tu = dtim_interval -
- AUX_ROC_MIN_SAFETY_BUFFER;
- }
- }
-}
-
static int iwl_mvm_send_aux_roc_cmd(struct iwl_mvm *mvm,
struct ieee80211_channel *channel,
struct ieee80211_vif *vif,
@@ -4564,48 +4526,6 @@ static int iwl_mvm_send_aux_roc_cmd(struct iwl_mvm *mvm,
return res;
}
-static int iwl_mvm_roc_add_cmd(struct iwl_mvm *mvm,
- struct ieee80211_channel *channel,
- struct ieee80211_vif *vif,
- int duration, u32 activity)
-{
- int res;
- u32 duration_tu, delay;
- struct iwl_roc_req roc_req = {
- .action = cpu_to_le32(FW_CTXT_ACTION_ADD),
- .activity = cpu_to_le32(activity),
- .sta_id = cpu_to_le32(mvm->aux_sta.sta_id),
- };
-
- lockdep_assert_held(&mvm->mutex);
-
- /* Set the channel info data */
- iwl_mvm_set_chan_info(mvm, &roc_req.channel_info,
- channel->hw_value,
- iwl_mvm_phy_band_from_nl80211(channel->band),
- IWL_PHY_CHANNEL_MODE20, 0);
-
- iwl_mvm_roc_duration_and_delay(vif, duration, &duration_tu,
- &delay);
- roc_req.duration = cpu_to_le32(duration_tu);
- roc_req.max_delay = cpu_to_le32(delay);
-
- IWL_DEBUG_TE(mvm,
- "\t(requested = %ums, max_delay = %ums)\n",
- duration, delay);
- IWL_DEBUG_TE(mvm,
- "Requesting to remain on channel %u for %utu\n",
- channel->hw_value, duration_tu);
-
- /* Set the node address */
- memcpy(roc_req.node_addr, vif->addr, ETH_ALEN);
-
- res = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(MAC_CONF_GROUP, ROC_CMD),
- 0, sizeof(roc_req), &roc_req);
-
- return res;
-}
-
static int iwl_mvm_add_aux_sta_for_hs20(struct iwl_mvm *mvm, u32 lmac_id)
{
int ret = 0;
@@ -2764,4 +2764,12 @@ iwl_mvm_chanctx_def(struct iwl_mvm *mvm, struct ieee80211_chanctx_conf *ctx)
return use_def ? &ctx->def : &ctx->min_def;
}
+void iwl_mvm_roc_duration_and_delay(struct ieee80211_vif *vif,
+ u32 duration_ms,
+ u32 *duration_tu,
+ u32 *delay);
+int iwl_mvm_roc_add_cmd(struct iwl_mvm *mvm,
+ struct ieee80211_channel *channel,
+ struct ieee80211_vif *vif,
+ int duration, u32 activity);
#endif /* __IWL_MVM_H__ */
@@ -986,6 +986,86 @@ void iwl_mvm_rx_session_protect_notif(struct iwl_mvm *mvm,
rcu_read_unlock();
}
+#define AUX_ROC_MIN_DURATION MSEC_TO_TU(100)
+#define AUX_ROC_MIN_DELAY MSEC_TO_TU(200)
+#define AUX_ROC_MAX_DELAY MSEC_TO_TU(600)
+#define AUX_ROC_SAFETY_BUFFER MSEC_TO_TU(20)
+#define AUX_ROC_MIN_SAFETY_BUFFER MSEC_TO_TU(10)
+
+void iwl_mvm_roc_duration_and_delay(struct ieee80211_vif *vif,
+ u32 duration_ms,
+ u32 *duration_tu,
+ u32 *delay)
+{
+ u32 dtim_interval = vif->bss_conf.dtim_period *
+ vif->bss_conf.beacon_int;
+
+ *delay = AUX_ROC_MIN_DELAY;
+ *duration_tu = MSEC_TO_TU(duration_ms);
+
+ /*
+ * If we are associated we want the delay time to be at least one
+ * dtim interval so that the FW can wait until after the DTIM and
+ * then start the time event, this will potentially allow us to
+ * remain off-channel for the max duration.
+ * Since we want to use almost a whole dtim interval we would also
+ * like the delay to be for 2-3 dtim intervals, in case there are
+ * other time events with higher priority.
+ */
+ if (vif->cfg.assoc) {
+ *delay = min_t(u32, dtim_interval * 3, AUX_ROC_MAX_DELAY);
+ /* We cannot remain off-channel longer than the DTIM interval */
+ if (dtim_interval <= *duration_tu) {
+ *duration_tu = dtim_interval - AUX_ROC_SAFETY_BUFFER;
+ if (*duration_tu <= AUX_ROC_MIN_DURATION)
+ *duration_tu = dtim_interval -
+ AUX_ROC_MIN_SAFETY_BUFFER;
+ }
+ }
+}
+
+int iwl_mvm_roc_add_cmd(struct iwl_mvm *mvm,
+ struct ieee80211_channel *channel,
+ struct ieee80211_vif *vif,
+ int duration, u32 activity)
+{
+ int res;
+ u32 duration_tu, delay;
+ struct iwl_roc_req roc_req = {
+ .action = cpu_to_le32(FW_CTXT_ACTION_ADD),
+ .activity = cpu_to_le32(activity),
+ .sta_id = cpu_to_le32(mvm->aux_sta.sta_id),
+ };
+
+ lockdep_assert_held(&mvm->mutex);
+
+ /* Set the channel info data */
+ iwl_mvm_set_chan_info(mvm, &roc_req.channel_info,
+ channel->hw_value,
+ iwl_mvm_phy_band_from_nl80211(channel->band),
+ IWL_PHY_CHANNEL_MODE20, 0);
+
+ iwl_mvm_roc_duration_and_delay(vif, duration, &duration_tu,
+ &delay);
+ roc_req.duration = cpu_to_le32(duration_tu);
+ roc_req.max_delay = cpu_to_le32(delay);
+
+ IWL_DEBUG_TE(mvm,
+ "\t(requested = %ums, max_delay = %ums)\n",
+ duration, delay);
+ IWL_DEBUG_TE(mvm,
+ "Requesting to remain on channel %u for %utu\n",
+ channel->hw_value, duration_tu);
+
+ /* Set the node address */
+ memcpy(roc_req.node_addr, vif->addr, ETH_ALEN);
+
+ res = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(MAC_CONF_GROUP, ROC_CMD),
+ 0, sizeof(roc_req), &roc_req);
+
+ return res;
+}
+
static int
iwl_mvm_start_p2p_roc_session_protection(struct iwl_mvm *mvm,
struct ieee80211_vif *vif,