| Message ID | 1502199018-28250-1-git-send-email-todor.tomov@linaro.org |
|---|---|
| Headers | show |
| Series | Qualcomm 8x16 Camera Subsystem driver | expand |
On Tue, Aug 08, 2017 at 04:29:57PM +0300, Todor Tomov wrote: > This patchset adds basic support for the Qualcomm Camera Subsystem found > on Qualcomm MSM8916 and APQ8016 processors. > > The driver implements V4L2, Media controller and V4L2 subdev interfaces. > Camera sensor using V4L2 subdev interface in the kernel is supported. > > The driver is implemented using as a reference the Qualcomm Camera > Subsystem driver for Android as found in Code Aurora [1]. > > The driver is tested on Dragonboard 410C (APQ8016) with one and two > OV5645 camera sensors. media-ctl [2] and yavta [3] applications were > used for testing. Also Gstreamer 1.10.4 with v4l2src plugin is supported. > > More information is present in the document added by the third patch. Thanks! Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> -- Sakari Ailus e-mail: sakari.ailus@iki.fi XMPP: sailus@retiisi.org.uk
This patchset adds basic support for the Qualcomm Camera Subsystem found on Qualcomm MSM8916 and APQ8016 processors. The driver implements V4L2, Media controller and V4L2 subdev interfaces. Camera sensor using V4L2 subdev interface in the kernel is supported. The driver is implemented using as a reference the Qualcomm Camera Subsystem driver for Android as found in Code Aurora [1]. The driver is tested on Dragonboard 410C (APQ8016) with one and two OV5645 camera sensors. media-ctl [2] and yavta [3] applications were used for testing. Also Gstreamer 1.10.4 with v4l2src plugin is supported. More information is present in the document added by the third patch. [1] https://source.codeaurora.org/quic/la/kernel/msm-3.10/ [2] https://git.linuxtv.org//v4l-utils.git [3] http://git.ideasonboard.org/yavta.git ------------------------------------------------------------------------------- Patchset Changelog: Version 4: - rework video node format handling - now can be set independently from the format on the subdev linked to it. Format compatibility is checked on STREAM_ON and should be compatible to allow start of the streaming; - fix sensor pixel clock rate request (use 4l2_ctrl_g_ctrl_int64()); - refuse to continue if received sensor pixel clock == 0; - add function to calculate clock frequency margin; - use proper functions/macros for 64bit division; - add v4l2 format names of the supported formats in documentation; - use media_entity_cleanup on camss_remove(); - remove uncompressed field from format struct - it is unused; - remove magic values; - fix SBGGR12 typo; - improve CSI2 lane configuration description in documentation; - do not touch compose selection rectangle sent by userspace; - always destroy mutexes at the end; - other small code fixes. Version 3: - use V4L2 fwnode framework; - remove settle count parameter from DT and add logic to calculate it instead; - refactor video device node format initialization; - fixed copyright information; - shorter clock names; - remove redundant memset usage; - print error code when error happens; - do not check format type on g_fmt/s_fmt; - add busy check on s_fmt; - rename files to add camss- prefix; - other small code fixes. Version 2: - patches 01-10 are updated from v1 following the review received and bugs and limitaitons found after v1 was posted. The updates include: - return buffers on unsuccessful stream on; - fill device capabilities in struct video_device; - simplify v4l2 file handle usage - no custom struct for file handle; - use vb2_fop_poll and vb2_fop_mmap v4l2 file operations; - add support for read/write I/O; - add support for DMABUF streaming I/O; - add support for EXPBUF and PREPARE_BUF ioctl; - avoid a race condition between device unbind and userspace access to the video node; - use non-contiguous memory for video buffers; - switch to V4L2 multi-planar API; - add useful error messages in case of an overflow in ISPIF; - other small and style fixes. - patches 11-19 are new (they were not ready/posted with v1). I'm including these in this patchset as they add valuable features and may be desired for a real world usage of the driver. ------------------------------------------------------------------------------- The driver depends on patches: - [media] media: Make parameter of media_entity_remote_pad() const - [media] v4l2-mediabus: Add helper functions - v4l: Add packed Bayer raw12 pixel formats The first and second are already on linux-next, the third one is included in this patchset to ensure successful compilation. ------------------------------------------------------------------------------- V4L2 compliance test result: $ v4l2-compliance -d /dev/video0 -s v4l2-compliance SHA : 172b663ea1fd16909a390f508851098a58061d9b Driver Info: Driver name : qcom-camss Card type : Qualcomm Camera Subsystem Bus info : platform:1b0ac00.camss Driver version: 4.9.34 Capabilities : 0x85201000 Video Capture Multiplanar Read/Write Streaming Extended Pix Format Device Capabilities Device Caps : 0x05201000 Video Capture Multiplanar Read/Write Streaming Extended Pix Format Compliance test for device /dev/video0 (not using libv4l2): Required ioctls: test VIDIOC_QUERYCAP: OK Allow for multiple opens: test second video open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK test for unlimited opens: OK Debug ioctls: test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK (Not Supported) Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 1 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Test input 0: Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) test VIDIOC_QUERYCTRL: OK (Not Supported) test VIDIOC_G/S_CTRL: OK (Not Supported) test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 0 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK test VIDIOC_TRY_FMT: OK test VIDIOC_S_FMT: OK test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK Test input 0: Streaming ioctls: test read/write: OK test MMAP: OK test USERPTR: OK (Not Supported) test DMABUF: Cannot test, specify --expbuf-device Total: 46, Succeeded: 46, Failed: 0, Warnings: 0 ------------------------------------------------------------------------------- Sakari Ailus (1): v4l: Add packed Bayer raw12 pixel formats Todor Tomov (20): dt-bindings: media: Binding document for Qualcomm Camera subsystem driver MAINTAINERS: Add Qualcomm Camera subsystem driver doc: media/v4l-drivers: Add Qualcomm Camera Subsystem driver document media: camss: Add CSIPHY files media: camss: Add CSID files media: camss: Add ISPIF files media: camss: Add VFE files media: camss: Add files which handle the video device nodes media: camms: Add core files media: camss: Enable building camss: vfe: Format conversion support using PIX interface doc: media/v4l-drivers: Qualcomm Camera Subsystem - PIX Interface camss: vfe: Support for frame padding camss: vfe: Add interface for scaling camss: vfe: Configure scaler module in VFE camss: vfe: Add interface for cropping camss: vfe: Configure crop module in VFE doc: media/v4l-drivers: Qualcomm Camera Subsystem - Scale and crop camss: Use optimal clock frequency rates doc: media/v4l-drivers: Qualcomm Camera Subsystem - Media graph .../devicetree/bindings/media/qcom,camss.txt | 197 ++ Documentation/media/uapi/v4l/pixfmt-rgb.rst | 1 + Documentation/media/uapi/v4l/pixfmt-srggb12p.rst | 104 + Documentation/media/v4l-drivers/qcom_camss.rst | 155 + .../media/v4l-drivers/qcom_camss_graph.dot | 41 + MAINTAINERS | 8 + drivers/media/platform/Kconfig | 7 + drivers/media/platform/Makefile | 2 + drivers/media/platform/qcom/camss-8x16/Makefile | 11 + .../media/platform/qcom/camss-8x16/camss-csid.c | 1092 +++++++ .../media/platform/qcom/camss-8x16/camss-csid.h | 82 + .../media/platform/qcom/camss-8x16/camss-csiphy.c | 890 ++++++ .../media/platform/qcom/camss-8x16/camss-csiphy.h | 77 + .../media/platform/qcom/camss-8x16/camss-ispif.c | 1175 ++++++++ .../media/platform/qcom/camss-8x16/camss-ispif.h | 85 + drivers/media/platform/qcom/camss-8x16/camss-vfe.c | 3088 ++++++++++++++++++++ drivers/media/platform/qcom/camss-8x16/camss-vfe.h | 123 + .../media/platform/qcom/camss-8x16/camss-video.c | 860 ++++++ .../media/platform/qcom/camss-8x16/camss-video.h | 70 + drivers/media/platform/qcom/camss-8x16/camss.c | 746 +++++ drivers/media/platform/qcom/camss-8x16/camss.h | 106 + drivers/media/v4l2-core/v4l2-ioctl.c | 12 +- include/uapi/linux/videodev2.h | 5 + 23 files changed, 8933 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/qcom,camss.txt create mode 100644 Documentation/media/uapi/v4l/pixfmt-srggb12p.rst create mode 100644 Documentation/media/v4l-drivers/qcom_camss.rst create mode 100644 Documentation/media/v4l-drivers/qcom_camss_graph.dot create mode 100644 drivers/media/platform/qcom/camss-8x16/Makefile create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csid.c create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csid.h create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csiphy.c create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csiphy.h create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-ispif.c create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-ispif.h create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-vfe.c create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-vfe.h create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-video.c create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-video.h create mode 100644 drivers/media/platform/qcom/camss-8x16/camss.c create mode 100644 drivers/media/platform/qcom/camss-8x16/camss.h -- 2.7.4