| Message ID | 1533791115-3681-1-git-send-email-firoz.khan@linaro.org |
|---|---|
| Headers | show |
| Series | System call table generation support | expand |
On Thu, Aug 09, 2018 at 10:35:10AM +0530, Firoz Khan wrote: > The purpose of this patch series is: > 1. We can easily add/modify/delete system call by changing entry > in syscall.tbl file. No need to manually edit many files. I tried applying this to latest upstream as it was yesterday HEAD = fedb8da96355f5f64 ("parisc: Define mb() and add memory barriers to assembler unlock sequences") it built with no errors, but does not boot. Init dies, so may be an issue with not being able to make a system call??? Serial console log below. -Tony Linux version 4.18.0-rc8-generic-smp-9-g3484b4f4d494 (aegl@linux-bxb1) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux)) #1 SMP Thu Aug 9 10:42:37 PDT 2018 EFI v2.10 by EDK II: efi: SALsystab=0x3e81e418 ACPI 2.0=0x3da42014 SMBIOS=0x3a3af000 booting generic kernel on platform dig earlycon: uart0 at I/O port 0x3f8 (options '') bootconsole [uart0] enabled ACPI: Early table checksum verification disabled ACPI: RSDP 0x000000003DA42014 000024 (v02 INTEL ) ACPI: XSDT 0x000000003DA42120 00004C (v01 INTEL BXBIOH 00000002 01000013) ACPI: FACP 0x000000003A3D2000 0000F4 (v04 INTEL BXBIOH 00000002 00000000) ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20180531/tbfadt-569) ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20180531/tbfadt-569) ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20180531/tbfadt-674) ACPI: DSDT 0x000000003A3B0000 019928 (v01 INTEL BXBIOH 00000002 INTL 20080926) ACPI: FACS 0x000000003A4EA000 000040 ACPI: FACS 0x000000003A4EA000 000040 ACPI: APIC 0x000000003A3D0000 0002D0 (v01 INTEL BXBIOH 00000002 00000000) ACPI: SLIT 0x000000003A3CE000 00003C (v01 INTEL BXBIOH 00000002 00000000) ACPI: SPCR 0x000000003A3CC000 000050 (v01 INTEL BXBIOH 00000002 00000000) ACPI: SRAT 0x000000003A3CA000 000550 (v01 INTEL BXBIOH 00000002 00000000) ia64_native_iosapic_pcat_compat_init: Disabling PC-AT compatible 8259 interrupts ACPI: Local APIC address (____ptrval____) 32 CPUs available, 32 CPUs total Number of logical nodes in system = 1 Number of memory chunks in system = 3 SMP: Allowing 32 CPUs, 0 hotplug CPUs Initial ramdisk at: 0xe0000004faad3000 (5048585 bytes) SAL 3.20: version 0.0 SAL: AP wakeup using external interrupt vector 0xf0 MCA related initialization done Virtual mem_map starts at 0x(____ptrval____) Zone ranges: DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x00000004fbffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000001000000-0x000000003a39ffff] node 0: [mem 0x000000003a3e0000-0x000000003a4dffff] node 0: [mem 0x000000003a540000-0x000000003a59ffff] node 0: [mem 0x000000003a6c0000-0x000000003a6dffff] node 0: [mem 0x000000003a780000-0x000000003ac3ffff] node 0: [mem 0x000000003acb0000-0x000000003ad4ffff] node 0: [mem 0x000000003ad70000-0x000000003ad8ffff] node 0: [mem 0x000000003adb0000-0x000000003adcffff] node 0: [mem 0x000000003ae40000-0x000000003ae4ffff] node 0: [mem 0x000000003ae60000-0x000000003ae7ffff] node 0: [mem 0x000000003b280000-0x000000003b2dffff] node 0: [mem 0x000000003b2f0000-0x000000003b39ffff] node 0: [mem 0x000000003b3c0000-0x000000003b92ffff] node 0: [mem 0x000000003b960000-0x000000003b97ffff] node 0: [mem 0x000000003c0f0000-0x000000003c15ffff] node 0: [mem 0x000000003c180000-0x000000003c20ffff] node 0: [mem 0x000000003c230000-0x000000003c7dffff] node 0: [mem 0x000000003c7f0000-0x000000003c88ffff] node 0: [mem 0x000000003c8b0000-0x000000003c8bffff] node 0: [mem 0x000000003c8e0000-0x000000003ca4ffff] node 0: [mem 0x000000003ca60000-0x000000003caaffff] node 0: [mem 0x000000003cac0000-0x000000003cc7ffff] node 0: [mem 0x000000003cc90000-0x000000003cdcffff] node 0: [mem 0x000000003cde0000-0x000000003ce2ffff] node 0: [mem 0x000000003ce40000-0x000000003d9effff] node 0: [mem 0x000000003da00000-0x000000003da3ffff] node 0: [mem 0x000000003da50000-0x000000003e7fffff] node 0: [mem 0x000000003e820000-0x000000003f8cffff] node 0: [mem 0x000000003fdd0000-0x000000003fdeffff] node 0: [mem 0x0000000100000000-0x00000003ffffffff] node 0: [mem 0x0000000440000000-0x00000004faf9ffff] node 0: [mem 0x00000004fb010000-0x00000004fb0bffff] node 0: [mem 0x00000004fb0d0000-0x00000004fbffffff] Initmem setup node 0 [mem 0x0000000001000000-0x00000004fbffffff] Built 1 zonelists, mobility grouping on. Total pages: 260199 Policy zone: Normal Kernel command line: BOOT_IMAGE=scsi0:\efi\SuSE\l-generic-smp.gz console=tty1 console=uart,io,0x3f8 intel_iommu=off root=/dev/sda3 DMAR: IOMMU disabled Sorting __ex_table... software IO TLB [mem 0x060a0000-0x0a0a0000] (64MB) mapped at [(____ptrval____)-(____ptrval____)] Memory: 16541952K/16670656K available (15088K kernel code, 6042K rwdata, 2028K rodata, 1216K init, 7091K bss, 128704K reserved, 0K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=32, Nodes=1024 Hierarchical RCU implementation. RCU event tracing is enabled. RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=32. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 NR_IRQS: 1024 ia64_native_iosapic_pcat_compat_init: Disabling PC-AT compatible 8259 interrupts ACPI: Local APIC address (____ptrval____) PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000) vector 30 PLATFORM int PMI (0x1): GSI 23 (edge, low) -> CPU 0 (0x0000) vector 0 register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level clocksource: itc: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns Console: colour VGA+ 80x25 console [tty1] enabled ACPI: Core revision 20180531 Calibrating delay loop... 3641.34 BogoMIPS (lpj=7282688) pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 2097152 (order: 8, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 7, 8388608 bytes) Mount-cache hash table entries: 32768 (order: 2, 262144 bytes) Mountpoint-cache hash table entries: 32768 (order: 2, 262144 bytes) Boot processor id 0x0/0x0 Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... Fixed BSP b0 value from CPU 1 CPU 1: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 61 cycles) CPU 2: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 671 cycles) CPU 3: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 667 cycles) CPU 4: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 670 cycles) CPU 5: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 667 cycles) CPU 6: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 671 cycles) CPU 7: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 666 cycles) CPU 8: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 756 cycles) CPU 9: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 751 cycles) CPU 10: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 758 cycles) CPU 11: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 751 cycles) CPU 12: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 757 cycles) CPU 13: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 752 cycles) CPU 14: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 758 cycles) CPU 15: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 752 cycles) CPU 16: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 713 cycles) CPU 17: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 706 cycles) CPU 18: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 712 cycles) CPU 19: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 706 cycles) CPU 20: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 708 cycles) CPU 21: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 706 cycles) CPU 22: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 708 cycles) CPU 23: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 706 cycles) CPU 24: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 765 cycles) CPU 25: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 758 cycles) CPU 26: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 764 cycles) CPU 27: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 758 cycles) CPU 28: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 763 cycles) CPU 29: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 758 cycles) CPU 30: synchronized ITC with CPU 0 (last diff -3 cycles, maxerr 768 cycles) CPU 31: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 758 cycles) smp: Brought up 1 node, 32 CPUs Total of 32 processors activated (116523.00 BogoMIPS). random: fast init done random: get_random_u32 called from bucket_table_alloc+0x100/0x2e0 with crng_init=1 SMBIOS 2.4 present. DMI: Supermicro I8QBH/I8QBH, BIOS I8QBH 15.006.004RAS 2010/05/10 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 8192 (order: 4, 1048576 bytes) NET: Registered protocol family 16 ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 HugeTLB registered 256 MiB page size, pre-allocated 0 pages ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Added _OSI(Linux-Dell-Video) ACPI: 1 ACPI AML tables successfully acquired and loaded ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOSAPIC for interrupt routing ACPI: Enabled 11 GPEs in block 00 to 3F ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI] acpi PNP0A08:00: PCIe port services disabled; not requesting _OSC control PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x1000-0x8fff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000fffff] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec3ffff] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1c0ff] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfedfffff] pci_bus 0000:00: root bus resource [mem 0x50000000-0x9fffffff window] pci_bus 0000:00: root bus resource [mem 0x10000000000-0x100fffffffe] pci_bus 0000:00: root bus resource [mem 0x10100000000-0x101fffffffe] pci_bus 0000:00: root bus resource [mem 0x10200000000-0x102fffffffe] pci_bus 0000:00: root bus resource [mem 0x10300000000-0x103fffffffe] pci_bus 0000:00: root bus resource [bus 00-7f] pci 0000:00:01.0: enabling Extended Tags pci 0000:00:03.0: enabling Extended Tags pci 0000:00:05.0: enabling Extended Tags pci 0000:00:07.0: enabling Extended Tags pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window pci 0000:01:00.1: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window pci 0000:00:03.0: PCI bridge to [bus 02] pci 0000:03:00.0: enabling Extended Tags pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffe00000-0xffffffff pref]: no compatible bridge window pci 0000:00:07.0: PCI bridge to [bus 04] pci 0000:00:1c.0: PCI bridge to [bus 05] pci 0000:00:1c.1: PCI bridge to [bus 06] pci 0000:00:1c.2: PCI bridge to [bus 07] pci 0000:00:1c.3: PCI bridge to [bus 08] pci 0000:00:1c.4: PCI bridge to [bus 09] pci 0000:00:1c.5: PCI bridge to [bus 0a] pci_bus 0000:0b: extended config space not accessible pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode) pci 0000:0b:04.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig Segments MSI] acpi PNP0A08:01: PCIe port services disabled; not requesting _OSC control PCI host bridge to bus 0000:80 pci_bus 0000:80: root bus resource [io 0x9000-0xffff window] pci_bus 0000:80: root bus resource [mem 0xfec40000-0xfec7ffff] pci_bus 0000:80: root bus resource [mem 0xa0000000-0xefffffff] pci_bus 0000:80: root bus resource [mem 0x10400000000-0x104fffffffe] pci_bus 0000:80: root bus resource [mem 0x10500000000-0x105fffffffe] pci_bus 0000:80: root bus resource [mem 0x10600000000-0x106fffffffe] pci_bus 0000:80: root bus resource [mem 0x10700000000-0x107fffffffe] pci_bus 0000:80: root bus resource [bus 80-ff] pci 0000:80:01.0: enabling Extended Tags pci 0000:80:03.0: enabling Extended Tags pci 0000:80:05.0: enabling Extended Tags pci 0000:80:07.0: enabling Extended Tags acpiphp: Slot [0] registered pci 0000:80:01.0: PCI bridge to [bus 81] pci 0000:81:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window pci 0000:81:00.1: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window acpiphp: Slot [0-1] registered pci 0000:80:03.0: PCI bridge to [bus 82] acpiphp: Slot [0-2] registered pci 0000:83:00.0: enabling Extended Tags pci 0000:80:05.0: PCI bridge to [bus 83] pci 0000:83:00.0: can't claim BAR 6 [mem 0xffe00000-0xffffffff pref]: no compatible bridge window acpiphp: Slot [0-3] registered pci 0000:80:07.0: PCI bridge to [bus 84] pci 0000:0b:04.0: vgaarb: setting as boot VGA device pci 0000:0b:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none pci 0000:0b:04.0: vgaarb: bridge control possible vgaarb: loaded SCSI subsystem initialized pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered Registered efivars operations random: crng init done clocksource: Switched to clocksource itc pnp: PnP ACPI init system 00:01: [io 0x0500-0x053f] has been reserved system 00:01: [io 0x0400-0x047f] has been reserved system 00:01: [io 0x0800-0x081f] has been reserved system 00:01: [mem 0xfed1c000-0xfed8bffe] could not be reserved system 00:01: [mem 0xff000000-0xffffffff] has been reserved system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved pnp: PnP ACPI: found 4 devices NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 8192 (order: 1, 131072 bytes) TCP established hash table entries: 131072 (order: 4, 1048576 bytes) TCP bind hash table entries: 65536 (order: 4, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) UDP hash table entries: 8192 (order: 2, 262144 bytes) UDP-Lite hash table entries: 8192 (order: 2, 262144 bytes) NET: Registered protocol family 1 GSI 16 (level, low) -> CPU 0 (0x0000) vector 49 GSI 16 (level, low) -> CPU 0 (0x0000) vector 49 unregistered pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x360 took 10857 usecs GSI 17 (level, low) -> CPU 1 (0x0100) vector 49 GSI 17 (level, low) -> CPU 1 (0x0100) vector 49 unregistered pci 0000:00:1a.1: quirk_usb_early_handoff+0x0/0x360 took 10689 usecs GSI 18 (level, low) -> CPU 2 (0x0200) vector 49 GSI 18 (level, low) -> CPU 2 (0x0200) vector 49 unregistered pci 0000:00:1a.2: quirk_usb_early_handoff+0x0/0x360 took 10682 usecs GSI 18 (level, low) -> CPU 3 (0x0300) vector 49 GSI 18 (level, low) -> CPU 3 (0x0300) vector 49 unregistered pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x360 took 10698 usecs GSI 16 (level, low) -> CPU 4 (0x0400) vector 49 GSI 16 (level, low) -> CPU 4 (0x0400) vector 49 unregistered pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x360 took 10697 usecs GSI 17 (level, low) -> CPU 5 (0x0500) vector 49 GSI 17 (level, low) -> CPU 5 (0x0500) vector 49 unregistered pci 0000:00:1d.1: quirk_usb_early_handoff+0x0/0x360 took 10686 usecs GSI 18 (level, low) -> CPU 6 (0x0600) vector 49 GSI 18 (level, low) -> CPU 6 (0x0600) vector 49 unregistered pci 0000:00:1d.2: quirk_usb_early_handoff+0x0/0x360 took 10696 usecs GSI 16 (level, low) -> CPU 7 (0x0700) vector 49 GSI 16 (level, low) -> CPU 7 (0x0700) vector 49 unregistered pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x360 took 10690 usecs pci 0000:0b:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] Trying to unpack rootfs image as initramfs... Freeing initrd memory: 4864kB freed PAL Information Facility v0.5 workingset: timestamp_bits=52 max_order=18 bucket_order=0 SGI XFS with security attributes, no debug enabled Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 00:02: ttyS0 at I/O 0x3f8 (irq = 44, base_baud = 115200) is a 16550A console [ttyS0] enabled console [ttyS0] enabled bootconsole [uart0] disabled bootconsole [uart0] disabled 00:03: ttyS1 at I/O 0x2f8 (irq = 45, base_baud = 115200) is a 16550A EFI Time Services Driver v0.4 brd: module loaded Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide-cd driver 5.00 GSI 17 (level, low) -> CPU 8 (0x1000) vector 49 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] scsi host0: ata_piix scsi host1: ata_piix ata1: SATA max UDMA/133 cmd 0x4138 ctl 0x414c bmdma 0x4110 irq 50 ata2: SATA max UDMA/133 cmd 0x4130 ctl 0x4148 bmdma 0x4118 irq 50 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] scsi host2: ata_piix scsi host3: ata_piix ata3: SATA max UDMA/133 cmd 0x4128 ctl 0x4144 bmdma 0x40f0 irq 50 ata4: SATA max UDMA/133 cmd 0x4120 ctl 0x4140 bmdma 0x40f8 irq 50 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. GSI 28 (level, low) -> CPU 9 (0x1100) vector 50 igb 0000:01:00.0: added PHC on eth0 igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:3a igb 0000:01:00.0: eth0: PBA No: Unknown igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) GSI 40 (level, low) -> CPU 10 (0x1200) vector 60 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata2.00: SATA link down (SStatus 0 SControl 300) ata2.01: SATA link down (SStatus 0 SControl 300) igb 0000:01:00.1: added PHC on eth1 igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection ata1.00: SATA link down (SStatus 0 SControl 300) igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:3b ata1.01: SATA link down (SStatus 0 SControl 300) igb 0000:01:00.1: eth1: PBA No: Unknown igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) GSI 52 (level, low) -> CPU 11 (0x1300) vector 70 igb 0000:81:00.0: added PHC on eth2 igb 0000:81:00.0: Intel(R) Gigabit Ethernet Network Connection igb 0000:81:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:b0 igb 0000:81:00.0: eth2: PBA No: Unknown igb 0000:81:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) GSI 64 (level, low) -> CPU 12 (0x1400) vector 80 igb 0000:81:00.1: added PHC on eth3 igb 0000:81:00.1: Intel(R) Gigabit Ethernet Network Connection igb 0000:81:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:b1 igb 0000:81:00.1: eth3: PBA No: Unknown igb 0000:81:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) Fusion MPT base driver 3.04.20 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.20 Fusion MPT SAS Host driver 3.04.20 GSI 26 (level, low) -> CPU 13 (0x1500) vector 90 mptbase: ioc0: Initiating bringup ioc0: LSISAS1068E B3: Capabilities={Initiator} scsi host4: ioc0: LSISAS1068E B3, FwRev=011a0000h, Ports=1, MaxQ=478, IRQ=92 mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 6, phy 6, sas_addr 0x5000c5000ecb8f49 scsi 4:0:0:0: Direct-Access SEAGATE ST9146802SS 0003 PQ: 0 ANSI: 5 GSI 50 (level, low) -> CPU 14 (0x1600) vector 91 sd 4:0:0:0: [sda] 286749488 512-byte logical blocks: (147 GB/137 GiB) mptbase: ioc1: Initiating bringup sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sda: sda1 sda2 sda3 sd 4:0:0:0: [sda] Attached SCSI disk ioc1: LSISAS1068E B3: Capabilities={Initiator} scsi host5: ioc1: LSISAS1068E B3, FwRev=011a0000h, Ports=1, MaxQ=478, IRQ=93 mptsas: ioc1: attaching ssp device: fw_channel 0, fw_id 6, phy 6, sas_addr 0x5000c5000ecada69 scsi 5:0:0:0: Direct-Access SEAGATE ST9146802SS 0003 PQ: 0 ANSI: 5 EFI Variables Facility v0.08 2004-May-17 sd 5:0:0:0: [sdb] 286749488 512-byte logical blocks: (147 GB/137 GiB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA sdb: sdb1 sdb2 sd 5:0:0:0: [sdb] Attached SCSI disk NET: Registered protocol family 17 console [netcon0] enabled netconsole: network logging started Freeing unused kernel memory: 1216K This architecture does not have kernel memory protection. doing fast boot Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
On 10 August 2018 at 21:50, Luck, Tony <tony.luck@intel.com> wrote: > On Thu, Aug 09, 2018 at 10:35:10AM +0530, Firoz Khan wrote: >> The purpose of this patch series is: >> 1. We can easily add/modify/delete system call by changing entry >> in syscall.tbl file. No need to manually edit many files. > > I tried applying this to latest upstream as it was yesterday > HEAD = fedb8da96355f5f64 ("parisc: Define mb() and add memory barriers to assembler unlock sequences") > > it built with no errors, but does not boot. Init dies, so may be an > issue with not being able to make a system call??? > > Serial console log below. Thanks for your reply :) Sorry for the delayed response :( I'll work on this issue now and will update you ASAP. - Firoz > > Linux version 4.18.0-rc8-generic-smp-9-g3484b4f4d494 (aegl@linux-bxb1) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux)) #1 SMP Thu Aug 9 10:42:37 PDT 2018 > EFI v2.10 by EDK II: > efi: SALsystab=0x3e81e418 ACPI 2.0=0x3da42014 SMBIOS=0x3a3af000 > booting generic kernel on platform dig > earlycon: uart0 at I/O port 0x3f8 (options '') > bootconsole [uart0] enabled > ACPI: Early table checksum verification disabled > ACPI: RSDP 0x000000003DA42014 000024 (v02 INTEL ) > ACPI: XSDT 0x000000003DA42120 00004C (v01 INTEL BXBIOH 00000002 01000013) > ACPI: FACP 0x000000003A3D2000 0000F4 (v04 INTEL BXBIOH 00000002 00000000) > ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20180531/tbfadt-569) > ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20180531/tbfadt-569) > ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20180531/tbfadt-674) > ACPI: DSDT 0x000000003A3B0000 019928 (v01 INTEL BXBIOH 00000002 INTL 20080926) > ACPI: FACS 0x000000003A4EA000 000040 > ACPI: FACS 0x000000003A4EA000 000040 > ACPI: APIC 0x000000003A3D0000 0002D0 (v01 INTEL BXBIOH 00000002 00000000) > ACPI: SLIT 0x000000003A3CE000 00003C (v01 INTEL BXBIOH 00000002 00000000) > ACPI: SPCR 0x000000003A3CC000 000050 (v01 INTEL BXBIOH 00000002 00000000) > ACPI: SRAT 0x000000003A3CA000 000550 (v01 INTEL BXBIOH 00000002 00000000) > ia64_native_iosapic_pcat_compat_init: Disabling PC-AT compatible 8259 interrupts > ACPI: Local APIC address (____ptrval____) > 32 CPUs available, 32 CPUs total > Number of logical nodes in system = 1 > Number of memory chunks in system = 3 > SMP: Allowing 32 CPUs, 0 hotplug CPUs > Initial ramdisk at: 0xe0000004faad3000 (5048585 bytes) > SAL 3.20: version 0.0 > SAL: AP wakeup using external interrupt vector 0xf0 > MCA related initialization done > Virtual mem_map starts at 0x(____ptrval____) > Zone ranges: > DMA32 [mem 0x0000000001000000-0x00000000ffffffff] > Normal [mem 0x0000000100000000-0x00000004fbffffff] > Movable zone start for each node > Early memory node ranges > node 0: [mem 0x0000000001000000-0x000000003a39ffff] > node 0: [mem 0x000000003a3e0000-0x000000003a4dffff] > node 0: [mem 0x000000003a540000-0x000000003a59ffff] > node 0: [mem 0x000000003a6c0000-0x000000003a6dffff] > node 0: [mem 0x000000003a780000-0x000000003ac3ffff] > node 0: [mem 0x000000003acb0000-0x000000003ad4ffff] > node 0: [mem 0x000000003ad70000-0x000000003ad8ffff] > node 0: [mem 0x000000003adb0000-0x000000003adcffff] > node 0: [mem 0x000000003ae40000-0x000000003ae4ffff] > node 0: [mem 0x000000003ae60000-0x000000003ae7ffff] > node 0: [mem 0x000000003b280000-0x000000003b2dffff] > node 0: [mem 0x000000003b2f0000-0x000000003b39ffff] > node 0: [mem 0x000000003b3c0000-0x000000003b92ffff] > node 0: [mem 0x000000003b960000-0x000000003b97ffff] > node 0: [mem 0x000000003c0f0000-0x000000003c15ffff] > node 0: [mem 0x000000003c180000-0x000000003c20ffff] > node 0: [mem 0x000000003c230000-0x000000003c7dffff] > node 0: [mem 0x000000003c7f0000-0x000000003c88ffff] > node 0: [mem 0x000000003c8b0000-0x000000003c8bffff] > node 0: [mem 0x000000003c8e0000-0x000000003ca4ffff] > node 0: [mem 0x000000003ca60000-0x000000003caaffff] > node 0: [mem 0x000000003cac0000-0x000000003cc7ffff] > node 0: [mem 0x000000003cc90000-0x000000003cdcffff] > node 0: [mem 0x000000003cde0000-0x000000003ce2ffff] > node 0: [mem 0x000000003ce40000-0x000000003d9effff] > node 0: [mem 0x000000003da00000-0x000000003da3ffff] > node 0: [mem 0x000000003da50000-0x000000003e7fffff] > node 0: [mem 0x000000003e820000-0x000000003f8cffff] > node 0: [mem 0x000000003fdd0000-0x000000003fdeffff] > node 0: [mem 0x0000000100000000-0x00000003ffffffff] > node 0: [mem 0x0000000440000000-0x00000004faf9ffff] > node 0: [mem 0x00000004fb010000-0x00000004fb0bffff] > node 0: [mem 0x00000004fb0d0000-0x00000004fbffffff] > Initmem setup node 0 [mem 0x0000000001000000-0x00000004fbffffff] > Built 1 zonelists, mobility grouping on. Total pages: 260199 > Policy zone: Normal > Kernel command line: BOOT_IMAGE=scsi0:\efi\SuSE\l-generic-smp.gz console=tty1 console=uart,io,0x3f8 intel_iommu=off root=/dev/sda3 > DMAR: IOMMU disabled > Sorting __ex_table... > software IO TLB [mem 0x060a0000-0x0a0a0000] (64MB) mapped at [(____ptrval____)-(____ptrval____)] > Memory: 16541952K/16670656K available (15088K kernel code, 6042K rwdata, 2028K rodata, 1216K init, 7091K bss, 128704K reserved, 0K cma-reserved) > SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=32, Nodes=1024 > Hierarchical RCU implementation. > RCU event tracing is enabled. > RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=32. > RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 > NR_IRQS: 1024 > ia64_native_iosapic_pcat_compat_init: Disabling PC-AT compatible 8259 interrupts > ACPI: Local APIC address (____ptrval____) > PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000) vector 30 > PLATFORM int PMI (0x1): GSI 23 (edge, low) -> CPU 0 (0x0000) vector 0 > register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level > > clocksource: itc: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns > Console: colour VGA+ 80x25 > console [tty1] enabled > ACPI: Core revision 20180531 > Calibrating delay loop... 3641.34 BogoMIPS (lpj=7282688) > pid_max: default: 32768 minimum: 301 > Dentry cache hash table entries: 2097152 (order: 8, 16777216 bytes) > Inode-cache hash table entries: 1048576 (order: 7, 8388608 bytes) > Mount-cache hash table entries: 32768 (order: 2, 262144 bytes) > Mountpoint-cache hash table entries: 32768 (order: 2, 262144 bytes) > Boot processor id 0x0/0x0 > Hierarchical SRCU implementation. > smp: Bringing up secondary CPUs ... > Fixed BSP b0 value from CPU 1 > CPU 1: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 61 cycles) > > CPU 2: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 671 cycles) > > CPU 3: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 667 cycles) > > CPU 4: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 670 cycles) > > CPU 5: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 667 cycles) > > CPU 6: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 671 cycles) > > CPU 7: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 666 cycles) > > CPU 8: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 756 cycles) > > CPU 9: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 751 cycles) > > CPU 10: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 758 cycles) > > CPU 11: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 751 cycles) > > CPU 12: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 757 cycles) > > CPU 13: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 752 cycles) > > CPU 14: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 758 cycles) > > CPU 15: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 752 cycles) > > CPU 16: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 713 cycles) > > CPU 17: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 706 cycles) > > CPU 18: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 712 cycles) > > CPU 19: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 706 cycles) > > CPU 20: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 708 cycles) > > CPU 21: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 706 cycles) > > CPU 22: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 708 cycles) > > CPU 23: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 706 cycles) > > CPU 24: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 765 cycles) > > CPU 25: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 758 cycles) > > CPU 26: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 764 cycles) > > CPU 27: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 758 cycles) > > CPU 28: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 763 cycles) > > CPU 29: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 758 cycles) > > CPU 30: synchronized ITC with CPU 0 (last diff -3 cycles, maxerr 768 cycles) > > CPU 31: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 758 cycles) > > smp: Brought up 1 node, 32 CPUs > Total of 32 processors activated (116523.00 BogoMIPS). > random: fast init done > random: get_random_u32 called from bucket_table_alloc+0x100/0x2e0 with crng_init=1 > SMBIOS 2.4 present. > DMI: Supermicro I8QBH/I8QBH, BIOS I8QBH 15.006.004RAS 2010/05/10 > clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns > futex hash table entries: 8192 (order: 4, 1048576 bytes) > NET: Registered protocol family 16 > ACPI: bus type PCI registered > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > HugeTLB registered 256 MiB page size, pre-allocated 0 pages > ACPI: Added _OSI(Module Device) > ACPI: Added _OSI(Processor Device) > ACPI: Added _OSI(3.0 _SCP Extensions) > ACPI: Added _OSI(Processor Aggregator Device) > ACPI: Added _OSI(Linux-Dell-Video) > ACPI: 1 ACPI AML tables successfully acquired and loaded > ACPI: Interpreter enabled > ACPI: (supports S0 S5) > ACPI: Using IOSAPIC for interrupt routing > ACPI: Enabled 11 GPEs in block 00 to 3F > ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) > acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI] > acpi PNP0A08:00: PCIe port services disabled; not requesting _OSC control > PCI host bridge to bus 0000:00 > pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] > pci_bus 0000:00: root bus resource [io 0x1000-0x8fff window] > pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] > pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000fffff] > pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec3ffff] > pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1c0ff] > pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfedfffff] > pci_bus 0000:00: root bus resource [mem 0x50000000-0x9fffffff window] > pci_bus 0000:00: root bus resource [mem 0x10000000000-0x100fffffffe] > pci_bus 0000:00: root bus resource [mem 0x10100000000-0x101fffffffe] > pci_bus 0000:00: root bus resource [mem 0x10200000000-0x102fffffffe] > pci_bus 0000:00: root bus resource [mem 0x10300000000-0x103fffffffe] > pci_bus 0000:00: root bus resource [bus 00-7f] > pci 0000:00:01.0: enabling Extended Tags > pci 0000:00:03.0: enabling Extended Tags > pci 0000:00:05.0: enabling Extended Tags > pci 0000:00:07.0: enabling Extended Tags > pci 0000:00:01.0: PCI bridge to [bus 01] > pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window > pci 0000:01:00.1: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window > pci 0000:00:03.0: PCI bridge to [bus 02] > pci 0000:03:00.0: enabling Extended Tags > pci 0000:00:05.0: PCI bridge to [bus 03] > pci 0000:03:00.0: can't claim BAR 6 [mem 0xffe00000-0xffffffff pref]: no compatible bridge window > pci 0000:00:07.0: PCI bridge to [bus 04] > pci 0000:00:1c.0: PCI bridge to [bus 05] > pci 0000:00:1c.1: PCI bridge to [bus 06] > pci 0000:00:1c.2: PCI bridge to [bus 07] > pci 0000:00:1c.3: PCI bridge to [bus 08] > pci 0000:00:1c.4: PCI bridge to [bus 09] > pci 0000:00:1c.5: PCI bridge to [bus 0a] > pci_bus 0000:0b: extended config space not accessible > pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode) > pci 0000:0b:04.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) > acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig Segments MSI] > acpi PNP0A08:01: PCIe port services disabled; not requesting _OSC control > PCI host bridge to bus 0000:80 > pci_bus 0000:80: root bus resource [io 0x9000-0xffff window] > pci_bus 0000:80: root bus resource [mem 0xfec40000-0xfec7ffff] > pci_bus 0000:80: root bus resource [mem 0xa0000000-0xefffffff] > pci_bus 0000:80: root bus resource [mem 0x10400000000-0x104fffffffe] > pci_bus 0000:80: root bus resource [mem 0x10500000000-0x105fffffffe] > pci_bus 0000:80: root bus resource [mem 0x10600000000-0x106fffffffe] > pci_bus 0000:80: root bus resource [mem 0x10700000000-0x107fffffffe] > pci_bus 0000:80: root bus resource [bus 80-ff] > pci 0000:80:01.0: enabling Extended Tags > pci 0000:80:03.0: enabling Extended Tags > pci 0000:80:05.0: enabling Extended Tags > pci 0000:80:07.0: enabling Extended Tags > acpiphp: Slot [0] registered > pci 0000:80:01.0: PCI bridge to [bus 81] > pci 0000:81:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window > pci 0000:81:00.1: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window > acpiphp: Slot [0-1] registered > pci 0000:80:03.0: PCI bridge to [bus 82] > acpiphp: Slot [0-2] registered > pci 0000:83:00.0: enabling Extended Tags > pci 0000:80:05.0: PCI bridge to [bus 83] > pci 0000:83:00.0: can't claim BAR 6 [mem 0xffe00000-0xffffffff pref]: no compatible bridge window > acpiphp: Slot [0-3] registered > pci 0000:80:07.0: PCI bridge to [bus 84] > pci 0000:0b:04.0: vgaarb: setting as boot VGA device > pci 0000:0b:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none > pci 0000:0b:04.0: vgaarb: bridge control possible > vgaarb: loaded > SCSI subsystem initialized > pps_core: LinuxPPS API ver. 1 registered > pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> > PTP clock support registered > Registered efivars operations > random: crng init done > clocksource: Switched to clocksource itc > pnp: PnP ACPI init > system 00:01: [io 0x0500-0x053f] has been reserved > system 00:01: [io 0x0400-0x047f] has been reserved > system 00:01: [io 0x0800-0x081f] has been reserved > system 00:01: [mem 0xfed1c000-0xfed8bffe] could not be reserved > system 00:01: [mem 0xff000000-0xffffffff] has been reserved > system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved > system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved > system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved > pnp: PnP ACPI: found 4 devices > NET: Registered protocol family 2 > tcp_listen_portaddr_hash hash table entries: 8192 (order: 1, 131072 bytes) > TCP established hash table entries: 131072 (order: 4, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 4, 1048576 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > UDP hash table entries: 8192 (order: 2, 262144 bytes) > UDP-Lite hash table entries: 8192 (order: 2, 262144 bytes) > NET: Registered protocol family 1 > GSI 16 (level, low) -> CPU 0 (0x0000) vector 49 > GSI 16 (level, low) -> CPU 0 (0x0000) vector 49 unregistered > pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x360 took 10857 usecs > GSI 17 (level, low) -> CPU 1 (0x0100) vector 49 > GSI 17 (level, low) -> CPU 1 (0x0100) vector 49 unregistered > pci 0000:00:1a.1: quirk_usb_early_handoff+0x0/0x360 took 10689 usecs > GSI 18 (level, low) -> CPU 2 (0x0200) vector 49 > GSI 18 (level, low) -> CPU 2 (0x0200) vector 49 unregistered > pci 0000:00:1a.2: quirk_usb_early_handoff+0x0/0x360 took 10682 usecs > GSI 18 (level, low) -> CPU 3 (0x0300) vector 49 > GSI 18 (level, low) -> CPU 3 (0x0300) vector 49 unregistered > pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x360 took 10698 usecs > GSI 16 (level, low) -> CPU 4 (0x0400) vector 49 > GSI 16 (level, low) -> CPU 4 (0x0400) vector 49 unregistered > pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x360 took 10697 usecs > GSI 17 (level, low) -> CPU 5 (0x0500) vector 49 > GSI 17 (level, low) -> CPU 5 (0x0500) vector 49 unregistered > pci 0000:00:1d.1: quirk_usb_early_handoff+0x0/0x360 took 10686 usecs > GSI 18 (level, low) -> CPU 6 (0x0600) vector 49 > GSI 18 (level, low) -> CPU 6 (0x0600) vector 49 unregistered > pci 0000:00:1d.2: quirk_usb_early_handoff+0x0/0x360 took 10696 usecs > GSI 16 (level, low) -> CPU 7 (0x0700) vector 49 > GSI 16 (level, low) -> CPU 7 (0x0700) vector 49 unregistered > pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x360 took 10690 usecs > pci 0000:0b:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] > Trying to unpack rootfs image as initramfs... > Freeing initrd memory: 4864kB freed > PAL Information Facility v0.5 > workingset: timestamp_bits=52 max_order=18 bucket_order=0 > SGI XFS with security attributes, no debug enabled > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > io scheduler mq-deadline registered > io scheduler kyber registered > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > 00:02: ttyS0 at I/O 0x3f8 (irq = 44, base_baud = 115200) is a 16550A > console [ttyS0] enabled > console [ttyS0] enabled > bootconsole [uart0] disabled > bootconsole [uart0] disabled > 00:03: ttyS1 at I/O 0x2f8 (irq = 45, base_baud = 115200) is a 16550A > EFI Time Services Driver v0.4 > brd: module loaded > Uniform Multi-Platform E-IDE driver > ide-gd driver 1.18 > ide-cd driver 5.00 > GSI 17 (level, low) -> CPU 8 (0x1000) vector 49 > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > scsi host0: ata_piix > scsi host1: ata_piix > ata1: SATA max UDMA/133 cmd 0x4138 ctl 0x414c bmdma 0x4110 irq 50 > ata2: SATA max UDMA/133 cmd 0x4130 ctl 0x4148 bmdma 0x4118 irq 50 > ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] > scsi host2: ata_piix > scsi host3: ata_piix > ata3: SATA max UDMA/133 cmd 0x4128 ctl 0x4144 bmdma 0x40f0 irq 50 > ata4: SATA max UDMA/133 cmd 0x4120 ctl 0x4140 bmdma 0x40f8 irq 50 > e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI > e1000: Copyright (c) 1999-2006 Intel Corporation. > igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k > igb: Copyright (c) 2007-2014 Intel Corporation. > GSI 28 (level, low) -> CPU 9 (0x1100) vector 50 > igb 0000:01:00.0: added PHC on eth0 > igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection > igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:3a > igb 0000:01:00.0: eth0: PBA No: Unknown > igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) > GSI 40 (level, low) -> CPU 10 (0x1200) vector 60 > ata3: SATA link down (SStatus 0 SControl 300) > ata4: SATA link down (SStatus 0 SControl 300) > ata2.00: SATA link down (SStatus 0 SControl 300) > ata2.01: SATA link down (SStatus 0 SControl 300) > igb 0000:01:00.1: added PHC on eth1 > igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection > ata1.00: SATA link down (SStatus 0 SControl 300) > igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:3b > ata1.01: SATA link down (SStatus 0 SControl 300) > igb 0000:01:00.1: eth1: PBA No: Unknown > igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) > GSI 52 (level, low) -> CPU 11 (0x1300) vector 70 > igb 0000:81:00.0: added PHC on eth2 > igb 0000:81:00.0: Intel(R) Gigabit Ethernet Network Connection > igb 0000:81:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:b0 > igb 0000:81:00.0: eth2: PBA No: Unknown > igb 0000:81:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) > GSI 64 (level, low) -> CPU 12 (0x1400) vector 80 > igb 0000:81:00.1: added PHC on eth3 > igb 0000:81:00.1: Intel(R) Gigabit Ethernet Network Connection > igb 0000:81:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:b1 > igb 0000:81:00.1: eth3: PBA No: Unknown > igb 0000:81:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) > Fusion MPT base driver 3.04.20 > Copyright (c) 1999-2008 LSI Corporation > Fusion MPT SPI Host driver 3.04.20 > Fusion MPT SAS Host driver 3.04.20 > GSI 26 (level, low) -> CPU 13 (0x1500) vector 90 > mptbase: ioc0: Initiating bringup > ioc0: LSISAS1068E B3: Capabilities={Initiator} > scsi host4: ioc0: LSISAS1068E B3, FwRev=011a0000h, Ports=1, MaxQ=478, IRQ=92 > mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 6, phy 6, sas_addr 0x5000c5000ecb8f49 > scsi 4:0:0:0: Direct-Access SEAGATE ST9146802SS 0003 PQ: 0 ANSI: 5 > GSI 50 (level, low) -> CPU 14 (0x1600) vector 91 > sd 4:0:0:0: [sda] 286749488 512-byte logical blocks: (147 GB/137 GiB) > mptbase: ioc1: Initiating bringup > sd 4:0:0:0: [sda] Write Protect is off > sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA > sda: sda1 sda2 sda3 > sd 4:0:0:0: [sda] Attached SCSI disk > ioc1: LSISAS1068E B3: Capabilities={Initiator} > scsi host5: ioc1: LSISAS1068E B3, FwRev=011a0000h, Ports=1, MaxQ=478, IRQ=93 > mptsas: ioc1: attaching ssp device: fw_channel 0, fw_id 6, phy 6, sas_addr 0x5000c5000ecada69 > scsi 5:0:0:0: Direct-Access SEAGATE ST9146802SS 0003 PQ: 0 ANSI: 5 > EFI Variables Facility v0.08 2004-May-17 > sd 5:0:0:0: [sdb] 286749488 512-byte logical blocks: (147 GB/137 GiB) > sd 5:0:0:0: [sdb] Write Protect is off > sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA > sdb: sdb1 sdb2 > sd 5:0:0:0: [sdb] Attached SCSI disk > NET: Registered protocol family 17 > console [netcon0] enabled > netconsole: network logging started > Freeing unused kernel memory: 1216K > This architecture does not have kernel memory protection. > doing fast boot > Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b > > ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b > ]---
The purpose of this patch series is: 1. We can easily add/modify/delete system call by changing entry in syscall.tbl file. No need to manually edit many files. 2. It is easy to unify the system call implementation across all the architectures. The system call tables are in different format in all architecture and it will be difficult to manually add or modify the system calls manually in the respective files. To make it easy by keeping a script and which'll generate the header file and syscall table file so this change will unify the implementation across all architectures. syscall.tbl contains the list of available system calls along with system call number and corresponding entry point. Add a new system call in this architecture will be possible by adding new entry in the syscall.tbl file. Adding a new table entry consisting of: - System call number. - ABI. - System call name. - Entry point name. ARM, s390 and x86 architecuture does exist the similar support. I leverage their implementation to come up with a generic solution. I have done the same support for work for alpha, m68k, microblaze, mips, parisc, powerpc, sh, sparc, and xtensa. But I started sending the patch for one architecuture for review. Below mentioned git repository contains more details. Git repo:- https://github.com/frzkhn/system_call_table_generator/ Finally, this is the ground work for solving the Y2038 issue. We need to add/change two dozen of system calls to solve Y2038 issue. So this patch series will help to easily modify from existing system call to Y2038 compatible system calls. I started working system call table generation on 4.17-rc1. I used marcin's script - https://github.com/hrw/syscalls-table to generate the syscall.tbl file. And this will be the input to the system call table generation script. But there are couple system call got add in the latest rc release. If run Marcin's script on latest release, it will generate a different syscall.tbl. But I still use the old file - syscall.tbl and once all review got over I'll update syscall.tbl alone w.r.to the tip of the kernel. The impact of this is, few of the system call won't work. Firoz Khan (5): ia64: Replace NR_syscalls macro from asm/unistd.h ia64: Added an offset for system call number ia64: Replaced the system call table entry from entry.S ia64: Added system call table generation support ia64: uapi header and system call table file generation arch/ia64/Makefile | 3 + arch/ia64/include/asm/Kbuild | 2 + arch/ia64/include/asm/unistd.h | 4 - arch/ia64/include/uapi/asm/Kbuild | 2 + arch/ia64/include/uapi/asm/unistd.h | 331 +------------------------------ arch/ia64/kernel/entry.S | 335 +------------------------------- arch/ia64/kernel/fsys.S | 2 +- arch/ia64/kernel/gate.S | 4 +- arch/ia64/kernel/ivt.S | 2 +- arch/ia64/kernel/patch.c | 2 +- arch/ia64/kernel/syscall.S | 13 ++ arch/ia64/kernel/syscalls/Makefile | 40 ++++ arch/ia64/kernel/syscalls/syscall.tbl | 334 +++++++++++++++++++++++++++++++ arch/ia64/kernel/syscalls/syscallhdr.sh | 33 ++++ arch/ia64/kernel/syscalls/syscalltbl.sh | 34 ++++ arch/ia64/mm/init.c | 6 +- 16 files changed, 474 insertions(+), 673 deletions(-) create mode 100644 arch/ia64/kernel/syscall.S create mode 100644 arch/ia64/kernel/syscalls/Makefile create mode 100644 arch/ia64/kernel/syscalls/syscall.tbl create mode 100644 arch/ia64/kernel/syscalls/syscallhdr.sh create mode 100644 arch/ia64/kernel/syscalls/syscalltbl.sh -- 1.9.1