From patchwork Tue Jan 15 09:42:55 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 14038 Return-Path: X-Original-To: patchwork@peony.canonical.com Delivered-To: patchwork@peony.canonical.com Received: from fiordland.canonical.com (fiordland.canonical.com [91.189.94.145]) by peony.canonical.com (Postfix) with ESMTP id 7617F23E57 for ; Tue, 15 Jan 2013 09:43:16 +0000 (UTC) Received: from mail-vb0-f52.google.com (mail-vb0-f52.google.com [209.85.212.52]) by fiordland.canonical.com (Postfix) with ESMTP id 1D0ACA192C1 for ; Tue, 15 Jan 2013 09:43:16 +0000 (UTC) Received: by mail-vb0-f52.google.com with SMTP id ez10so4404735vbb.25 for ; Tue, 15 Jan 2013 01:43:15 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=x-received:x-forwarded-to:x-forwarded-for:delivered-to:x-received :received-spf:from:to:cc:subject:date:message-id:x-mailer :mime-version:content-type:x-gm-message-state; bh=3dXrTbVT9DFTmIXDoVqQuJv8fiIxdTSnFsVss+L5pjw=; b=Cb2xKJJAsZNacXwBPpPi06i58xYfcYfue6f2PpVfcgX4PTlEE0WZXbyC5F0CqSlKT3 WcbNwqYF6518pfJldYXYxTgVLqrDtVQ21hP5kmGQdSXEjzb1163SF1IJhkbWbRCLUTOP p7wIxAP8k3G50BhHpQ24t1hiosg2bf06DU4fwZuIiODlXg7ROx5EFLJ2TpBj1GLg7xs5 ZhKPZsKZxYO0XifuKz/nXcRLSkYPCTaB94N7zG4Gdf09QwA+91zrQCVYOhgqt49uKYaS l98vTA+KOensk2xGCEjE97+enuFQUepzsgmdMbpiD6EKQMZDUMq5mrS8dhUtE78wjEzK DJSA== X-Received: by 10.52.18.147 with SMTP id w19mr91968808vdd.94.1358242995537; Tue, 15 Jan 2013 01:43:15 -0800 (PST) X-Forwarded-To: linaro-patchwork@canonical.com X-Forwarded-For: patch@linaro.org linaro-patchwork@canonical.com Delivered-To: patches@linaro.org Received: by 10.58.145.101 with SMTP id st5csp102908veb; Tue, 15 Jan 2013 01:43:14 -0800 (PST) X-Received: by 10.14.223.200 with SMTP id v48mr240488153eep.24.1358242994162; Tue, 15 Jan 2013 01:43:14 -0800 (PST) Received: from eu1sys200aog115.obsmtp.com (eu1sys200aog115.obsmtp.com [207.126.144.139]) by mx.google.com with SMTP id x3si31355690eep.42.2013.01.15.01.43.05 (version=TLSv1 cipher=RC4-SHA bits=128/128); Tue, 15 Jan 2013 01:43:14 -0800 (PST) Received-SPF: neutral (google.com: 207.126.144.139 is neither permitted nor denied by best guess record for domain of linus.walleij@stericsson.com) client-ip=207.126.144.139; Authentication-Results: mx.google.com; spf=neutral (google.com: 207.126.144.139 is neither permitted nor denied by best guess record for domain of linus.walleij@stericsson.com) smtp.mail=linus.walleij@stericsson.com Received: from beta.dmz-ap.st.com ([138.198.100.35]) (using TLSv1) by eu1sys200aob115.postini.com ([207.126.147.11]) with SMTP ID DSNKUPUkqfRqwZnw2/5I8hDt2w4fnswuHXV4@postini.com; Tue, 15 Jan 2013 09:43:13 UTC Received: from zeta.dmz-ap.st.com (ns6.st.com [138.198.234.13]) by beta.dmz-ap.st.com (STMicroelectronics) with ESMTP id 2A3BF111; Tue, 15 Jan 2013 09:34:52 +0000 (GMT) Received: from relay1.stm.gmessaging.net (unknown [10.230.100.17]) by zeta.dmz-ap.st.com (STMicroelectronics) with ESMTP id 63142D5E; Tue, 15 Jan 2013 09:43:01 +0000 (GMT) Received: from exdcvycastm022.EQ1STM.local (alteon-source-exch [10.230.100.61]) (using TLSv1 with cipher RC4-MD5 (128/128 bits)) (Client CN "exdcvycastm022", Issuer "exdcvycastm022" (not verified)) by relay1.stm.gmessaging.net (Postfix) with ESMTPS id 9E5F224C07D; Tue, 15 Jan 2013 10:42:55 +0100 (CET) Received: from steludxu4075.lud.stericsson.com (10.230.100.153) by smtp.stericsson.com (10.230.100.30) with Microsoft SMTP Server (TLS) id 8.3.83.0; Tue, 15 Jan 2013 10:42:59 +0100 From: Linus Walleij To: , Cc: Stephen Warren , Anmar Oueja , Lee Jones , Linus Walleij Subject: [PATCH 2/4] gpio: delete AB8500 driver Date: Tue, 15 Jan 2013 10:42:55 +0100 Message-ID: <1358242975-5084-1-git-send-email-linus.walleij@stericsson.com> X-Mailer: git-send-email 1.7.11.3 MIME-Version: 1.0 X-Gm-Message-State: ALoCoQmRDz6HElvy0jYbqObNNrkA3nTDo3+axMgxGjMDyuQ35V17KsGpxv5PyF/c0YMlqUrM+iKp From: Linus Walleij The AB8500 GPIO driver has been marked BROKEN for ages, and we have something better in store: a shiny new pinctrl driver. So let use delete this old driver as the first step. Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 6 - drivers/gpio/Makefile | 1 - drivers/gpio/gpio-ab8500.c | 520 --------------------------------------------- 3 files changed, 527 deletions(-) delete mode 100644 drivers/gpio/gpio-ab8500.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 682de75..e5116fa 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -657,12 +657,6 @@ config GPIO_JANZ_TTL This driver provides support for driving the pins in output mode only. Input mode is not supported. -config GPIO_AB8500 - bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions" - depends on AB8500_CORE && BROKEN - help - Select this to enable the AB8500 IC GPIO driver - config GPIO_TPS6586X bool "TPS6586X GPIO" depends on MFD_TPS6586X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index c5aebd0..45a388c 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o -obj-$(CONFIG_GPIO_AB8500) += gpio-ab8500.o obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o diff --git a/drivers/gpio/gpio-ab8500.c b/drivers/gpio/gpio-ab8500.c deleted file mode 100644 index 983ad42..0000000 --- a/drivers/gpio/gpio-ab8500.c +++ /dev/null @@ -1,520 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * Author: BIBEK BASU - * License terms: GNU General Public License (GPL) version 2 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * GPIO registers offset - * Bank: 0x10 - */ -#define AB8500_GPIO_SEL1_REG 0x00 -#define AB8500_GPIO_SEL2_REG 0x01 -#define AB8500_GPIO_SEL3_REG 0x02 -#define AB8500_GPIO_SEL4_REG 0x03 -#define AB8500_GPIO_SEL5_REG 0x04 -#define AB8500_GPIO_SEL6_REG 0x05 - -#define AB8500_GPIO_DIR1_REG 0x10 -#define AB8500_GPIO_DIR2_REG 0x11 -#define AB8500_GPIO_DIR3_REG 0x12 -#define AB8500_GPIO_DIR4_REG 0x13 -#define AB8500_GPIO_DIR5_REG 0x14 -#define AB8500_GPIO_DIR6_REG 0x15 - -#define AB8500_GPIO_OUT1_REG 0x20 -#define AB8500_GPIO_OUT2_REG 0x21 -#define AB8500_GPIO_OUT3_REG 0x22 -#define AB8500_GPIO_OUT4_REG 0x23 -#define AB8500_GPIO_OUT5_REG 0x24 -#define AB8500_GPIO_OUT6_REG 0x25 - -#define AB8500_GPIO_PUD1_REG 0x30 -#define AB8500_GPIO_PUD2_REG 0x31 -#define AB8500_GPIO_PUD3_REG 0x32 -#define AB8500_GPIO_PUD4_REG 0x33 -#define AB8500_GPIO_PUD5_REG 0x34 -#define AB8500_GPIO_PUD6_REG 0x35 - -#define AB8500_GPIO_IN1_REG 0x40 -#define AB8500_GPIO_IN2_REG 0x41 -#define AB8500_GPIO_IN3_REG 0x42 -#define AB8500_GPIO_IN4_REG 0x43 -#define AB8500_GPIO_IN5_REG 0x44 -#define AB8500_GPIO_IN6_REG 0x45 -#define AB8500_GPIO_ALTFUN_REG 0x45 -#define ALTFUN_REG_INDEX 6 -#define AB8500_NUM_GPIO 42 -#define AB8500_NUM_VIR_GPIO_IRQ 16 - -enum ab8500_gpio_action { - NONE, - STARTUP, - SHUTDOWN, - MASK, - UNMASK -}; - -struct ab8500_gpio { - struct gpio_chip chip; - struct ab8500 *parent; - struct device *dev; - struct mutex lock; - u32 irq_base; - enum ab8500_gpio_action irq_action; - u16 rising; - u16 falling; -}; -/** - * to_ab8500_gpio() - get the pointer to ab8500_gpio - * @chip: Member of the structure ab8500_gpio - */ -static inline struct ab8500_gpio *to_ab8500_gpio(struct gpio_chip *chip) -{ - return container_of(chip, struct ab8500_gpio, chip); -} - -static int ab8500_gpio_set_bits(struct gpio_chip *chip, u8 reg, - unsigned offset, int val) -{ - struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); - u8 pos = offset % 8; - int ret; - - reg = reg + (offset / 8); - ret = abx500_mask_and_set_register_interruptible(ab8500_gpio->dev, - AB8500_MISC, reg, 1 << pos, val << pos); - if (ret < 0) - dev_err(ab8500_gpio->dev, "%s write failed\n", __func__); - return ret; -} -/** - * ab8500_gpio_get() - Get the particular GPIO value - * @chip: Gpio device - * @offset: GPIO number to read - */ -static int ab8500_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); - u8 mask = 1 << (offset % 8); - u8 reg = AB8500_GPIO_OUT1_REG + (offset / 8); - int ret; - u8 data; - ret = abx500_get_register_interruptible(ab8500_gpio->dev, AB8500_MISC, - reg, &data); - if (ret < 0) { - dev_err(ab8500_gpio->dev, "%s read failed\n", __func__); - return ret; - } - return (data & mask) >> (offset % 8); -} - -static void ab8500_gpio_set(struct gpio_chip *chip, unsigned offset, int val) -{ - struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); - int ret; - /* Write the data */ - ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, 1); - if (ret < 0) - dev_err(ab8500_gpio->dev, "%s write failed\n", __func__); -} - -static int ab8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset, - int val) -{ - int ret; - /* set direction as output */ - ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1); - if (ret < 0) - return ret; - /* disable pull down */ - ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1); - if (ret < 0) - return ret; - /* set the output as 1 or 0 */ - return ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); - -} - -static int ab8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - /* set the register as input */ - return ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0); -} - -static int ab8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - /* - * Only some GPIOs are interrupt capable, and they are - * organized in discontiguous clusters: - * - * GPIO6 to GPIO13 - * GPIO24 and GPIO25 - * GPIO36 to GPIO41 - */ - static struct ab8500_gpio_irq_cluster { - int start; - int end; - } clusters[] = { - {.start = 6, .end = 13}, - {.start = 24, .end = 25}, - {.start = 36, .end = 41}, - }; - struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); - int base = ab8500_gpio->irq_base; - int i; - - for (i = 0; i < ARRAY_SIZE(clusters); i++) { - struct ab8500_gpio_irq_cluster *cluster = &clusters[i]; - - if (offset >= cluster->start && offset <= cluster->end) - return base + offset - cluster->start; - - /* Advance by the number of gpios in this cluster */ - base += cluster->end - cluster->start + 1; - } - - return -EINVAL; -} - -static struct gpio_chip ab8500gpio_chip = { - .label = "ab8500_gpio", - .owner = THIS_MODULE, - .direction_input = ab8500_gpio_direction_input, - .get = ab8500_gpio_get, - .direction_output = ab8500_gpio_direction_output, - .set = ab8500_gpio_set, - .to_irq = ab8500_gpio_to_irq, -}; - -static unsigned int irq_to_rising(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - int offset = irq - ab8500_gpio->irq_base; - int new_irq = offset + AB8500_INT_GPIO6R - + ab8500_gpio->parent->irq_base; - return new_irq; -} - -static unsigned int irq_to_falling(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - int offset = irq - ab8500_gpio->irq_base; - int new_irq = offset + AB8500_INT_GPIO6F - + ab8500_gpio->parent->irq_base; - return new_irq; - -} - -static unsigned int rising_to_irq(unsigned int irq, void *dev) -{ - struct ab8500_gpio *ab8500_gpio = dev; - int offset = irq - AB8500_INT_GPIO6R - - ab8500_gpio->parent->irq_base ; - int new_irq = offset + ab8500_gpio->irq_base; - return new_irq; -} - -static unsigned int falling_to_irq(unsigned int irq, void *dev) -{ - struct ab8500_gpio *ab8500_gpio = dev; - int offset = irq - AB8500_INT_GPIO6F - - ab8500_gpio->parent->irq_base ; - int new_irq = offset + ab8500_gpio->irq_base; - return new_irq; - -} - -/* - * IRQ handler - */ - -static irqreturn_t handle_rising(int irq, void *dev) -{ - - handle_nested_irq(rising_to_irq(irq , dev)); - return IRQ_HANDLED; -} - -static irqreturn_t handle_falling(int irq, void *dev) -{ - - handle_nested_irq(falling_to_irq(irq, dev)); - return IRQ_HANDLED; -} - -static void ab8500_gpio_irq_lock(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - mutex_lock(&ab8500_gpio->lock); -} - -static void ab8500_gpio_irq_sync_unlock(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - int offset = irq - ab8500_gpio->irq_base; - bool rising = ab8500_gpio->rising & BIT(offset); - bool falling = ab8500_gpio->falling & BIT(offset); - int ret; - - switch (ab8500_gpio->irq_action) { - case STARTUP: - if (rising) - ret = request_threaded_irq(irq_to_rising(irq), - NULL, handle_rising, - IRQF_TRIGGER_RISING, - "ab8500-gpio-r", ab8500_gpio); - if (falling) - ret = request_threaded_irq(irq_to_falling(irq), - NULL, handle_falling, - IRQF_TRIGGER_FALLING, - "ab8500-gpio-f", ab8500_gpio); - break; - case SHUTDOWN: - if (rising) - free_irq(irq_to_rising(irq), ab8500_gpio); - if (falling) - free_irq(irq_to_falling(irq), ab8500_gpio); - break; - case MASK: - if (rising) - disable_irq(irq_to_rising(irq)); - if (falling) - disable_irq(irq_to_falling(irq)); - break; - case UNMASK: - if (rising) - enable_irq(irq_to_rising(irq)); - if (falling) - enable_irq(irq_to_falling(irq)); - break; - case NONE: - break; - } - ab8500_gpio->irq_action = NONE; - ab8500_gpio->rising &= ~(BIT(offset)); - ab8500_gpio->falling &= ~(BIT(offset)); - mutex_unlock(&ab8500_gpio->lock); -} - - -static void ab8500_gpio_irq_mask(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - ab8500_gpio->irq_action = MASK; -} - -static void ab8500_gpio_irq_unmask(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - ab8500_gpio->irq_action = UNMASK; -} - -static int ab8500_gpio_irq_set_type(unsigned int irq, unsigned int type) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - int offset = irq - ab8500_gpio->irq_base; - - if (type == IRQ_TYPE_EDGE_BOTH) { - ab8500_gpio->rising = BIT(offset); - ab8500_gpio->falling = BIT(offset); - } else if (type == IRQ_TYPE_EDGE_RISING) { - ab8500_gpio->rising = BIT(offset); - } else { - ab8500_gpio->falling = BIT(offset); - } - return 0; -} - -unsigned int ab8500_gpio_irq_startup(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - ab8500_gpio->irq_action = STARTUP; - return 0; -} - -void ab8500_gpio_irq_shutdown(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - ab8500_gpio->irq_action = SHUTDOWN; -} - -static struct irq_chip ab8500_gpio_irq_chip = { - .name = "ab8500-gpio", - .startup = ab8500_gpio_irq_startup, - .shutdown = ab8500_gpio_irq_shutdown, - .bus_lock = ab8500_gpio_irq_lock, - .bus_sync_unlock = ab8500_gpio_irq_sync_unlock, - .mask = ab8500_gpio_irq_mask, - .unmask = ab8500_gpio_irq_unmask, - .set_type = ab8500_gpio_irq_set_type, -}; - -static int ab8500_gpio_irq_init(struct ab8500_gpio *ab8500_gpio) -{ - u32 base = ab8500_gpio->irq_base; - int irq; - - for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ ; irq++) { - set_irq_chip_data(irq, ab8500_gpio); - set_irq_chip_and_handler(irq, &ab8500_gpio_irq_chip, - handle_simple_irq); - set_irq_nested_thread(irq, 1); -#ifdef CONFIG_ARM - set_irq_flags(irq, IRQF_VALID); -#else - set_irq_noprobe(irq); -#endif - } - - return 0; -} - -static void ab8500_gpio_irq_remove(struct ab8500_gpio *ab8500_gpio) -{ - int base = ab8500_gpio->irq_base; - int irq; - - for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ; irq++) { -#ifdef CONFIG_ARM - set_irq_flags(irq, 0); -#endif - set_irq_chip_and_handler(irq, NULL, NULL); - set_irq_chip_data(irq, NULL); - } -} - -static int ab8500_gpio_probe(struct platform_device *pdev) -{ - struct ab8500_platform_data *ab8500_pdata = - dev_get_platdata(pdev->dev.parent); - struct ab8500_gpio_platform_data *pdata; - struct ab8500_gpio *ab8500_gpio; - int ret; - int i; - - pdata = ab8500_pdata->gpio; - if (!pdata) { - dev_err(&pdev->dev, "gpio platform data missing\n"); - return -ENODEV; - } - - ab8500_gpio = kzalloc(sizeof(struct ab8500_gpio), GFP_KERNEL); - if (ab8500_gpio == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); - return -ENOMEM; - } - ab8500_gpio->dev = &pdev->dev; - ab8500_gpio->parent = dev_get_drvdata(pdev->dev.parent); - ab8500_gpio->chip = ab8500gpio_chip; - ab8500_gpio->chip.ngpio = AB8500_NUM_GPIO; - ab8500_gpio->chip.dev = &pdev->dev; - ab8500_gpio->chip.base = pdata->gpio_base; - ab8500_gpio->irq_base = pdata->irq_base; - /* initialize the lock */ - mutex_init(&ab8500_gpio->lock); - /* - * AB8500 core will handle and clear the IRQ - * configre GPIO based on config-reg value. - * These values are for selecting the PINs as - * GPIO or alternate function - */ - for (i = AB8500_GPIO_SEL1_REG; i <= AB8500_GPIO_SEL6_REG; i++) { - ret = abx500_set_register_interruptible(ab8500_gpio->dev, - AB8500_MISC, i, - pdata->config_reg[i]); - if (ret < 0) - goto out_free; - } - ret = abx500_set_register_interruptible(ab8500_gpio->dev, AB8500_MISC, - AB8500_GPIO_ALTFUN_REG, - pdata->config_reg[ALTFUN_REG_INDEX]); - if (ret < 0) - goto out_free; - - ret = ab8500_gpio_irq_init(ab8500_gpio); - if (ret) - goto out_free; - ret = gpiochip_add(&ab8500_gpio->chip); - if (ret) { - dev_err(&pdev->dev, "unable to add gpiochip: %d\n", - ret); - goto out_rem_irq; - } - platform_set_drvdata(pdev, ab8500_gpio); - return 0; - -out_rem_irq: - ab8500_gpio_irq_remove(ab8500_gpio); -out_free: - mutex_destroy(&ab8500_gpio->lock); - kfree(ab8500_gpio); - return ret; -} - -/* - * ab8500_gpio_remove() - remove Ab8500-gpio driver - * @pdev : Platform device registered - */ -static int ab8500_gpio_remove(struct platform_device *pdev) -{ - struct ab8500_gpio *ab8500_gpio = platform_get_drvdata(pdev); - int ret; - - ret = gpiochip_remove(&ab8500_gpio->chip); - if (ret < 0) { - dev_err(ab8500_gpio->dev, "unable to remove gpiochip: %d\n", - ret); - return ret; - } - - platform_set_drvdata(pdev, NULL); - mutex_destroy(&ab8500_gpio->lock); - kfree(ab8500_gpio); - - return 0; -} - -static struct platform_driver ab8500_gpio_driver = { - .driver = { - .name = "ab8500-gpio", - .owner = THIS_MODULE, - }, - .probe = ab8500_gpio_probe, - .remove = ab8500_gpio_remove, -}; - -static int __init ab8500_gpio_init(void) -{ - return platform_driver_register(&ab8500_gpio_driver); -} -arch_initcall(ab8500_gpio_init); - -static void __exit ab8500_gpio_exit(void) -{ - platform_driver_unregister(&ab8500_gpio_driver); -} -module_exit(ab8500_gpio_exit); - -MODULE_AUTHOR("BIBEK BASU "); -MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins to be used as GPIO"); -MODULE_ALIAS("platform:ab8500-gpio"); -MODULE_LICENSE("GPL v2");