diff mbox series

[RESEND,v2,21/53] mtd: nand: denali: move multi device fixup code to a helper function

Message ID 1490213273-8571-22-git-send-email-yamada.masahiro@socionext.com
State Accepted
Commit 6da27b469317435b776114649439e32384165aa5
Headers show
Series None | expand

Commit Message

Masahiro Yamada March 22, 2017, 8:07 p.m. UTC
Collect multi NAND fixups into a helper function instead of
scattering them in denali_init().

I am rewording the comment block to clearly explain what is called
"multi device".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

Changes in v2:
  - Reword the comment block for clarification

 drivers/mtd/nand/denali.c | 54 +++++++++++++++++++++++++++++------------------
 1 file changed, 33 insertions(+), 21 deletions(-)

-- 
2.7.4
diff mbox series

Patch

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 1706975..4e63d57 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1458,6 +1458,36 @@  static void denali_drv_init(struct denali_nand_info *denali)
 	denali->irq_status = 0;
 }
 
+static void denali_multidev_fixup(struct denali_nand_info *denali)
+{
+	struct nand_chip *chip = &denali->nand;
+	struct mtd_info *mtd = nand_to_mtd(chip);
+
+	/*
+	 * Support for multi device:
+	 * When the IP configuration is x16 capable and two x8 chips are
+	 * connected in parallel, DEVICES_CONNECTED should be set to 2.
+	 * In this case, the core framework knows nothing about this fact,
+	 * so we should tell it the _logical_ pagesize and anything necessary.
+	 */
+	denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
+
+	mtd->size <<= denali->devnum - 1;
+	mtd->erasesize <<= denali->devnum - 1;
+	mtd->writesize <<= denali->devnum - 1;
+	mtd->oobsize <<= denali->devnum - 1;
+	chip->chipsize <<= denali->devnum - 1;
+	chip->page_shift += denali->devnum - 1;
+	chip->phys_erase_shift += denali->devnum - 1;
+	chip->bbt_erase_shift += denali->devnum - 1;
+	chip->chip_shift += denali->devnum - 1;
+	chip->pagemask <<= denali->devnum - 1;
+	chip->ecc.size *= denali->devnum;
+	chip->ecc.bytes *= denali->devnum;
+	chip->ecc.strength *= denali->devnum;
+	denali->bbtskipbytes *= denali->devnum;
+}
+
 int denali_init(struct denali_nand_info *denali)
 {
 	struct nand_chip *chip = &denali->nand;
@@ -1540,24 +1570,6 @@  int denali_init(struct denali_nand_info *denali)
 	}
 
 	/*
-	 * support for multi nand
-	 * MTD known nothing about multi nand, so we should tell it
-	 * the real pagesize and anything necessery
-	 */
-	denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
-	chip->chipsize <<= denali->devnum - 1;
-	chip->page_shift += denali->devnum - 1;
-	chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
-	chip->bbt_erase_shift += denali->devnum - 1;
-	chip->phys_erase_shift = chip->bbt_erase_shift;
-	chip->chip_shift += denali->devnum - 1;
-	mtd->writesize <<= denali->devnum - 1;
-	mtd->oobsize <<= denali->devnum - 1;
-	mtd->erasesize <<= denali->devnum - 1;
-	mtd->size = chip->numchips * chip->chipsize;
-	denali->bbtskipbytes *= denali->devnum;
-
-	/*
 	 * second stage of the NAND scan
 	 * this stage requires information regarding ECC and
 	 * bad block management.
@@ -1600,11 +1612,9 @@  int denali_init(struct denali_nand_info *denali)
 	}
 
 	mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
-	chip->ecc.bytes *= denali->devnum;
-	chip->ecc.strength *= denali->devnum;
 
 	/* override the default read operations */
-	chip->ecc.size = ECC_SECTOR_SIZE * denali->devnum;
+	chip->ecc.size = ECC_SECTOR_SIZE;
 	chip->ecc.read_page = denali_read_page;
 	chip->ecc.read_page_raw = denali_read_page_raw;
 	chip->ecc.write_page = denali_write_page;
@@ -1613,6 +1623,8 @@  int denali_init(struct denali_nand_info *denali)
 	chip->ecc.write_oob = denali_write_oob;
 	chip->erase = denali_erase;
 
+	denali_multidev_fixup(denali);
+
 	ret = nand_scan_tail(mtd);
 	if (ret)
 		goto failed_req_irq;