@@ -152,8 +152,8 @@ netcp: netcp@2000000 {
/* NetCP address range */
ranges = <0 0x2000000 0x100000>;
- clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>;
- clock-names = "pa_clk", "ethss_clk", "cpts";
+ clocks = <&clkpa>, <&clkcpgmac>;
+ clock-names = "pa_clk", "ethss_clk";
dma-coherent;
ti,navigator-dmas = <&dma_gbe 22>,
@@ -175,6 +175,22 @@ netcp: netcp@2000000 {
tx-queue = <648>;
tx-channel = "nettx";
+ cpts {
+ clocks = <&cpts_refclk_mux>;
+ clock-names = "cpts";
+
+ cpts_refclk_mux: cpts-refclk-mux {
+ #clock-cells = <0>;
+ clocks = <&chipclk12>, <&chipclk13>,
+ <&timi0>, <&timi1>,
+ <&tsrefclk>;
+ ti,mux-tbl = <0x0>, <0x1>, <0x2>,
+ <0x3>, <0x8>;
+ assigned-clocks = <&cpts_refclk_mux>;
+ assigned-clock-parents = <&chipclk12>;
+ };
+ };
+
interfaces {
gbe0: interface-0 {
slave-port = <0>;
KeyStone 66AK2H/K 1G Ethernet Switch Subsystems, can control an external multiplexer that selects one of up to 32 clocks for time sync reference (RFTCLK) clock. This feature can be configured through CPTS_RFTCLK_SEL register (offset: x08) in CPTS module and modelled as multiplexer clock. Hence, add cpts-refclk-mux clock node which allows to mux one of SYSCLK2, SYSCLK3, TIMI0, TIMI1, TSREFCLK clocks as CPTS reference clock [1] and group all CPTS properties under "cpts" subnode. [1] http://www.ti.com/lit/gpn/66ak2h14 Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm/boot/dts/keystone-k2hk-netcp.dtsi | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) -- 2.17.1