diff mbox series

[v2,09/10] firmware: arm_scmi: Drop config flag in clk_ops->rate_set

Message ID 20190726135138.9858-10-sudeep.holla@arm.com
State Accepted
Commit d0aba11614552d43a61c3acdf36876b00060286e
Headers show
Series firmware: arm_scmi: Add support for Rx channels, async commands and delayed response | expand

Commit Message

Sudeep Holla July 26, 2019, 1:51 p.m. UTC
CLOCK_PROTOCOL_ATTRIBUTES provides attributes to indicate the maximum
number of pending asynchronous clock rate changes supported by the
platform. If it's non-zero, then we should be able to use asynchronous
clock rate set for any clocks until the maximum limit is reached.

In order to add that support, let's drop the config flag passed to
clk_ops->rate_set and handle the asynchronous requests dynamically.

Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Stephen Boyd <sboyd@kernel.org>

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

---
 drivers/clk/clk-scmi.c            | 2 +-
 drivers/firmware/arm_scmi/clock.c | 4 ++--
 include/linux/scmi_protocol.h     | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/clk/clk-scmi.c b/drivers/clk/clk-scmi.c
index a2287c770d5c..886f7c5df51a 100644
--- a/drivers/clk/clk-scmi.c
+++ b/drivers/clk/clk-scmi.c
@@ -69,7 +69,7 @@  static int scmi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct scmi_clk *clk = to_scmi_clk(hw);
 
-	return clk->handle->clk_ops->rate_set(clk->handle, clk->id, 0, rate);
+	return clk->handle->clk_ops->rate_set(clk->handle, clk->id, rate);
 }
 
 static int scmi_clk_enable(struct clk_hw *hw)
diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
index 0a194af92438..dd215bd11a58 100644
--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -218,7 +218,7 @@  scmi_clock_rate_get(const struct scmi_handle *handle, u32 clk_id, u64 *value)
 }
 
 static int scmi_clock_rate_set(const struct scmi_handle *handle, u32 clk_id,
-			       u32 config, u64 rate)
+			       u64 rate)
 {
 	int ret;
 	struct scmi_xfer *t;
@@ -230,7 +230,7 @@  static int scmi_clock_rate_set(const struct scmi_handle *handle, u32 clk_id,
 		return ret;
 
 	cfg = t->tx.buf;
-	cfg->flags = cpu_to_le32(config);
+	cfg->flags = cpu_to_le32(0);
 	cfg->id = cpu_to_le32(clk_id);
 	cfg->value_low = cpu_to_le32(rate & 0xffffffff);
 	cfg->value_high = cpu_to_le32(rate >> 32);
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index ae7381413f1f..f0f2b53a1dac 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -71,7 +71,7 @@  struct scmi_clk_ops {
 	int (*rate_get)(const struct scmi_handle *handle, u32 clk_id,
 			u64 *rate);
 	int (*rate_set)(const struct scmi_handle *handle, u32 clk_id,
-			u32 config, u64 rate);
+			u64 rate);
 	int (*enable)(const struct scmi_handle *handle, u32 clk_id);
 	int (*disable)(const struct scmi_handle *handle, u32 clk_id);
 };