diff mbox series

[7/8] drm/bridge: dw-hdmi-i2s: enable only the required i2s lanes

Message ID 20190805134102.24173-8-jbrunet@baylibre.com
State Superseded
Headers show
Series drm/bridge: dw-hdmi: improve i2s support | expand

Commit Message

Jerome Brunet Aug. 5, 2019, 1:41 p.m. UTC
Enable the i2s lanes depending on the number of channel in the stream

Cc: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

---
 .../gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c   | 15 ++++++++++++++-
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.h         |  6 +++++-
 2 files changed, 19 insertions(+), 2 deletions(-)

-- 
2.21.0
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 41bee0099578..b8ece9c1ba2c 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -54,7 +54,20 @@  static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
 	hdmi_write(audio, (u8)~HDMI_MC_SWRSTZ_I2SSWRST_REQ, HDMI_MC_SWRSTZ);
 
 	inputclkfs	= HDMI_AUD_INPUTCLKFS_64FS;
-	conf0		= HDMI_AUD_CONF0_I2S_ALL_ENABLE;
+	conf0		= (HDMI_AUD_CONF0_I2S_SELECT | HDMI_AUD_CONF0_I2S_EN0);
+
+	/* Enable the required i2s lanes */
+	switch (hparms->channels) {
+	case 7 ... 8:
+		conf0 |= HDMI_AUD_CONF0_I2S_EN3;
+		/* Fall-thru */
+	case 5 ... 6:
+		conf0 |= HDMI_AUD_CONF0_I2S_EN2;
+		/* Fall-thru */
+	case 3 ... 4:
+		conf0 |= HDMI_AUD_CONF0_I2S_EN1;
+		/* Fall-thru */
+	}
 
 	switch (hparms->sample_width) {
 	case 16:
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
index a272fa393ae6..6988f12d89d9 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
@@ -865,7 +865,11 @@  enum {
 
 /* AUD_CONF0 field values */
 	HDMI_AUD_CONF0_SW_RESET = 0x80,
-	HDMI_AUD_CONF0_I2S_ALL_ENABLE = 0x2F,
+	HDMI_AUD_CONF0_I2S_SELECT = 0x20,
+	HDMI_AUD_CONF0_I2S_EN3 = 0x08,
+	HDMI_AUD_CONF0_I2S_EN2 = 0x04,
+	HDMI_AUD_CONF0_I2S_EN1 = 0x02,
+	HDMI_AUD_CONF0_I2S_EN0 = 0x01,
 
 /* AUD_CONF1 field values */
 	HDMI_AUD_CONF1_MODE_I2S = 0x00,