| Message ID | 20190806170208.6787-3-sudeep.holla@arm.com |
|---|---|
| State | Accepted |
| Commit | 823839571d76d465c6e454495864b085d699adb5 |
| Headers | show |
| Series | firmware: arm_scmi: add SCMI v2.0 fastchannels and reset protocol support | expand |
> Subject: [PATCH v2 2/5] firmware: arm_scmi: Make use SCMI v2.0 > fastchannel for performance protocol > > SCMI v2.0 adds support for "FastChannel" which do not use a message > header as they are specialized for a single message. > > Only PERFORMANCE_LIMITS_{SET,GET} and > PERFORMANCE_LEVEL_{SET,GET} commands are supported over > fastchannels. As they are optional, they need to be discovered by > PERFORMANCE_DESCRIBE_FASTCHANNEL command. > Further {LIMIT,LEVEL}_SET commands can have optional doorbell support. > > Add support for making use of these fastchannels. > > Cc: Ionela Voinescu <Ionela.Voinescu@arm.com> > Cc: Chris Redpath <Chris.Redpath@arm.com> > Cc: Quentin Perret <Quentin.Perret@arm.com> > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > --- > drivers/firmware/arm_scmi/perf.c | 104 > +++++++++++++++++++++++++++++-- > 1 file changed, 100 insertions(+), 4 deletions(-) > > v1->v2: > - Changed the macro SCMI_PERF_FC_RING_DB to use do {} while(0) > > diff --git a/drivers/firmware/arm_scmi/perf.c > b/drivers/firmware/arm_scmi/perf.c > index 6cce3e82e81e..fb7f6cab2c11 100644 > --- a/drivers/firmware/arm_scmi/perf.c > +++ b/drivers/firmware/arm_scmi/perf.c > @@ -8,6 +8,7 @@ > #include <linux/bits.h> > #include <linux/of.h> > #include <linux/io.h> > +#include <linux/io-64-nonatomic-hi-lo.h> > #include <linux/platform_device.h> > #include <linux/pm_opp.h> > #include <linux/sort.h> > @@ -293,7 +294,42 @@ scmi_perf_describe_levels_get(const struct > scmi_handle *handle, u32 domain, > return ret; > } > > -static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 > domain, > +#define SCMI_PERF_FC_RING_DB(doorbell, w) \ > +do { \ > + u##w val = 0; \ > + struct scmi_fc_db_info *db = doorbell; \ > + \ > + if (db->mask) \ > + val = ioread##w(db->addr) & db->mask; \ > + iowrite##w((u##w)db->set | val, db->addr); \ > +} while(0) > + > +static void scmi_perf_fc_ring_db(struct scmi_fc_db_info *db) { > + if (!db || !db->addr) > + return; > + > + if (db->width == 1) > + SCMI_PERF_FC_RING_DB(db, 8); > + else if (db->width == 2) > + SCMI_PERF_FC_RING_DB(db, 16); > + else if (db->width == 4) > + SCMI_PERF_FC_RING_DB(db, 32); > + else /* db->width == 8 */ > +#ifdef CONFIG_64BIT > + SCMI_PERF_FC_RING_DB(db, 64); > +#else > + { > + u64 val = 0; > + > + if (db->mask) > + val = ioread64_hi_lo(db->addr) & db->mask; > + iowrite64_hi_lo(db->set, db->addr); > + } > +#endif > +} > + > +static int scmi_perf_mb_limits_set(const struct scmi_handle *handle, > +u32 domain, > u32 max_perf, u32 min_perf) > { > int ret; > @@ -316,7 +352,23 @@ static int scmi_perf_limits_set(const struct > scmi_handle *handle, u32 domain, > return ret; > } > > -static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 > domain, > +static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 > domain, > + u32 max_perf, u32 min_perf) > +{ > + struct scmi_perf_info *pi = handle->perf_priv; > + struct perf_dom_info *dom = pi->dom_info + domain; > + > + if (dom->fc_info && dom->fc_info->limit_set_addr) { > + iowrite32(max_perf, dom->fc_info->limit_set_addr); > + iowrite32(min_perf, dom->fc_info->limit_set_addr + 4); > + scmi_perf_fc_ring_db(dom->fc_info->limit_set_db); > + return 0; > + } > + > + return scmi_perf_mb_limits_set(handle, domain, max_perf, min_perf); } > + > +static int scmi_perf_mb_limits_get(const struct scmi_handle *handle, > +u32 domain, > u32 *max_perf, u32 *min_perf) > { > int ret; > @@ -342,7 +394,22 @@ static int scmi_perf_limits_get(const struct > scmi_handle *handle, u32 domain, > return ret; > } > > -static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain, > +static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 > domain, > + u32 *max_perf, u32 *min_perf) > +{ > + struct scmi_perf_info *pi = handle->perf_priv; > + struct perf_dom_info *dom = pi->dom_info + domain; > + > + if (dom->fc_info && dom->fc_info->limit_get_addr) { > + *max_perf = ioread32(dom->fc_info->limit_get_addr); > + *min_perf = ioread32(dom->fc_info->limit_get_addr + 4); > + return 0; > + } > + > + return scmi_perf_mb_limits_get(handle, domain, max_perf, min_perf); } > + > +static int scmi_perf_mb_level_set(const struct scmi_handle *handle, u32 > +domain, > u32 level, bool poll) > { > int ret; > @@ -365,7 +432,22 @@ static int scmi_perf_level_set(const struct > scmi_handle *handle, u32 domain, > return ret; > } > > -static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain, > +static int scmi_perf_level_set(const struct scmi_handle *handle, u32 > domain, > + u32 level, bool poll) > +{ > + struct scmi_perf_info *pi = handle->perf_priv; > + struct perf_dom_info *dom = pi->dom_info + domain; > + > + if (dom->fc_info && dom->fc_info->level_set_addr) { > + iowrite32(level, dom->fc_info->level_set_addr); > + scmi_perf_fc_ring_db(dom->fc_info->level_set_db); > + return 0; > + } > + > + return scmi_perf_mb_level_set(handle, domain, level, poll); } > + > +static int scmi_perf_mb_level_get(const struct scmi_handle *handle, u32 > +domain, > u32 *level, bool poll) > { > int ret; > @@ -387,6 +469,20 @@ static int scmi_perf_level_get(const struct > scmi_handle *handle, u32 domain, > return ret; > } > > +static int scmi_perf_level_get(const struct scmi_handle *handle, u32 > domain, > + u32 *level, bool poll) > +{ > + struct scmi_perf_info *pi = handle->perf_priv; > + struct perf_dom_info *dom = pi->dom_info + domain; > + > + if (dom->fc_info && dom->fc_info->level_get_addr) { > + *level = ioread32(dom->fc_info->level_get_addr); > + return 0; > + } > + > + return scmi_perf_mb_level_get(handle, domain, level, poll); } > + > static bool scmi_perf_fc_size_is_valid(u32 msg, u32 size) { > if ((msg == PERF_LEVEL_GET || msg == PERF_LEVEL_SET) && size == 4) Reviewed-by: Peng Fan <peng.fan@nxp.com> > -- > 2.17.1
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c index 6cce3e82e81e..fb7f6cab2c11 100644 --- a/drivers/firmware/arm_scmi/perf.c +++ b/drivers/firmware/arm_scmi/perf.c @@ -8,6 +8,7 @@ #include <linux/bits.h> #include <linux/of.h> #include <linux/io.h> +#include <linux/io-64-nonatomic-hi-lo.h> #include <linux/platform_device.h> #include <linux/pm_opp.h> #include <linux/sort.h> @@ -293,7 +294,42 @@ scmi_perf_describe_levels_get(const struct scmi_handle *handle, u32 domain, return ret; } -static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain, +#define SCMI_PERF_FC_RING_DB(doorbell, w) \ +do { \ + u##w val = 0; \ + struct scmi_fc_db_info *db = doorbell; \ + \ + if (db->mask) \ + val = ioread##w(db->addr) & db->mask; \ + iowrite##w((u##w)db->set | val, db->addr); \ +} while(0) + +static void scmi_perf_fc_ring_db(struct scmi_fc_db_info *db) +{ + if (!db || !db->addr) + return; + + if (db->width == 1) + SCMI_PERF_FC_RING_DB(db, 8); + else if (db->width == 2) + SCMI_PERF_FC_RING_DB(db, 16); + else if (db->width == 4) + SCMI_PERF_FC_RING_DB(db, 32); + else /* db->width == 8 */ +#ifdef CONFIG_64BIT + SCMI_PERF_FC_RING_DB(db, 64); +#else + { + u64 val = 0; + + if (db->mask) + val = ioread64_hi_lo(db->addr) & db->mask; + iowrite64_hi_lo(db->set, db->addr); + } +#endif +} + +static int scmi_perf_mb_limits_set(const struct scmi_handle *handle, u32 domain, u32 max_perf, u32 min_perf) { int ret; @@ -316,7 +352,23 @@ static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain, return ret; } -static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain, +static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain, + u32 max_perf, u32 min_perf) +{ + struct scmi_perf_info *pi = handle->perf_priv; + struct perf_dom_info *dom = pi->dom_info + domain; + + if (dom->fc_info && dom->fc_info->limit_set_addr) { + iowrite32(max_perf, dom->fc_info->limit_set_addr); + iowrite32(min_perf, dom->fc_info->limit_set_addr + 4); + scmi_perf_fc_ring_db(dom->fc_info->limit_set_db); + return 0; + } + + return scmi_perf_mb_limits_set(handle, domain, max_perf, min_perf); +} + +static int scmi_perf_mb_limits_get(const struct scmi_handle *handle, u32 domain, u32 *max_perf, u32 *min_perf) { int ret; @@ -342,7 +394,22 @@ static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain, return ret; } -static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain, +static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain, + u32 *max_perf, u32 *min_perf) +{ + struct scmi_perf_info *pi = handle->perf_priv; + struct perf_dom_info *dom = pi->dom_info + domain; + + if (dom->fc_info && dom->fc_info->limit_get_addr) { + *max_perf = ioread32(dom->fc_info->limit_get_addr); + *min_perf = ioread32(dom->fc_info->limit_get_addr + 4); + return 0; + } + + return scmi_perf_mb_limits_get(handle, domain, max_perf, min_perf); +} + +static int scmi_perf_mb_level_set(const struct scmi_handle *handle, u32 domain, u32 level, bool poll) { int ret; @@ -365,7 +432,22 @@ static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain, return ret; } -static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain, +static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain, + u32 level, bool poll) +{ + struct scmi_perf_info *pi = handle->perf_priv; + struct perf_dom_info *dom = pi->dom_info + domain; + + if (dom->fc_info && dom->fc_info->level_set_addr) { + iowrite32(level, dom->fc_info->level_set_addr); + scmi_perf_fc_ring_db(dom->fc_info->level_set_db); + return 0; + } + + return scmi_perf_mb_level_set(handle, domain, level, poll); +} + +static int scmi_perf_mb_level_get(const struct scmi_handle *handle, u32 domain, u32 *level, bool poll) { int ret; @@ -387,6 +469,20 @@ static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain, return ret; } +static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain, + u32 *level, bool poll) +{ + struct scmi_perf_info *pi = handle->perf_priv; + struct perf_dom_info *dom = pi->dom_info + domain; + + if (dom->fc_info && dom->fc_info->level_get_addr) { + *level = ioread32(dom->fc_info->level_get_addr); + return 0; + } + + return scmi_perf_mb_level_get(handle, domain, level, poll); +} + static bool scmi_perf_fc_size_is_valid(u32 msg, u32 size) { if ((msg == PERF_LEVEL_GET || msg == PERF_LEVEL_SET) && size == 4)
SCMI v2.0 adds support for "FastChannel" which do not use a message header as they are specialized for a single message. Only PERFORMANCE_LIMITS_{SET,GET} and PERFORMANCE_LEVEL_{SET,GET} commands are supported over fastchannels. As they are optional, they need to be discovered by PERFORMANCE_DESCRIBE_FASTCHANNEL command. Further {LIMIT,LEVEL}_SET commands can have optional doorbell support. Add support for making use of these fastchannels. Cc: Ionela Voinescu <Ionela.Voinescu@arm.com> Cc: Chris Redpath <Chris.Redpath@arm.com> Cc: Quentin Perret <Quentin.Perret@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> --- drivers/firmware/arm_scmi/perf.c | 104 +++++++++++++++++++++++++++++-- 1 file changed, 100 insertions(+), 4 deletions(-) v1->v2: - Changed the macro SCMI_PERF_FC_RING_DB to use do {} while(0) -- 2.17.1