| Message ID | 708449b45b1ef546a4c27d99bc68d6cc151e8ad3.1507198895.git-series.maxime.ripard@free-electrons.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | sunxi: Cleanup DT warnings for the A10 and A80 | expand |
On Thu, Oct 5, 2017 at 6:49 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > Some node names in the A80 DTSI still have underscores in them. Remove them > in favour of hyphens to remove DTC warnings. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > arch/arm/boot/dts/sun9i-a80.dtsi | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi > index f9cb701f29b0..70d79ef711b3 100644 > --- a/arch/arm/boot/dts/sun9i-a80.dtsi > +++ b/arch/arm/boot/dts/sun9i-a80.dtsi > @@ -139,7 +139,7 @@ > * would also throw all the PLL clock rates off, or just the > * downstream clocks in the PRCM. > */ > - osc24M: osc24M_clk { > + osc24M: clk-24M { Can we stick with the same style for all clks? Like "X-clk"? > #clock-cells = <0>; > compatible = "fixed-clock"; > clock-frequency = <24000000>; > @@ -151,7 +151,7 @@ > * AC100 codec/RTC chip. This serves as a placeholder for > * board dts files to specify the source. > */ > - osc32k: osc32k_clk { > + osc32k: clk-32k { And here. > #clock-cells = <0>; > compatible = "fixed-factor-clock"; > clock-div = <1>; > @@ -169,7 +169,7 @@ > clock-output-names = "cpus"; > }; > > - ahbs: ahbs_clk { > + ahbs: ahbs-clk { > compatible = "fixed-factor-clock"; > #clock-cells = <0>; > clock-div = <1>; > @@ -708,12 +708,12 @@ > #interrupt-cells = <3>; > #gpio-cells = <3>; > > - r_ir_pins: r_ir { > + r_ir_pins: r-ir { "r-ir-pins". > pins = "PL6"; > function = "s_cir_rx"; > }; > > - r_rsb_pins: r_rsb { > + r_rsb_pins: r-rsb { "r-rsb-pins". ChenYu > pins = "PN0", "PN1"; > function = "s_rsb"; > drive-strength = <20>; > -- > git-series 0.9.1
On Thu, Oct 05, 2017 at 03:56:29PM +0000, Chen-Yu Tsai wrote: > On Thu, Oct 5, 2017 at 6:49 PM, Maxime Ripard > <maxime.ripard@free-electrons.com> wrote: > > Some node names in the A80 DTSI still have underscores in them. Remove them > > in favour of hyphens to remove DTC warnings. > > > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > > --- > > arch/arm/boot/dts/sun9i-a80.dtsi | 10 +++++----- > > 1 file changed, 5 insertions(+), 5 deletions(-) > > > > diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi > > index f9cb701f29b0..70d79ef711b3 100644 > > --- a/arch/arm/boot/dts/sun9i-a80.dtsi > > +++ b/arch/arm/boot/dts/sun9i-a80.dtsi > > @@ -139,7 +139,7 @@ > > * would also throw all the PLL clock rates off, or just the > > * downstream clocks in the PRCM. > > */ > > - osc24M: osc24M_clk { > > + osc24M: clk-24M { > > Can we stick with the same style for all clks? Like "X-clk"? > > > #clock-cells = <0>; > > compatible = "fixed-clock"; > > clock-frequency = <24000000>; > > @@ -151,7 +151,7 @@ > > * AC100 codec/RTC chip. This serves as a placeholder for > > * board dts files to specify the source. > > */ > > - osc32k: osc32k_clk { > > + osc32k: clk-32k { > > And here. I guess that's the same argument for buttons. Most of the other nodes are starting with the device class, and have a suffix to make them generic. > > #clock-cells = <0>; > > compatible = "fixed-factor-clock"; > > clock-div = <1>; > > @@ -169,7 +169,7 @@ > > clock-output-names = "cpus"; > > }; > > > > - ahbs: ahbs_clk { > > + ahbs: ahbs-clk { > > compatible = "fixed-factor-clock"; > > #clock-cells = <0>; > > clock-div = <1>; > > @@ -708,12 +708,12 @@ > > #interrupt-cells = <3>; > > #gpio-cells = <3>; > > > > - r_ir_pins: r_ir { > > + r_ir_pins: r-ir { > > "r-ir-pins". > > > pins = "PL6"; > > function = "s_cir_rx"; > > }; > > > > - r_rsb_pins: r_rsb { > > + r_rsb_pins: r-rsb { > > "r-rsb-pins". I'll address those comments, thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index f9cb701f29b0..70d79ef711b3 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -139,7 +139,7 @@ * would also throw all the PLL clock rates off, or just the * downstream clocks in the PRCM. */ - osc24M: osc24M_clk { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -151,7 +151,7 @@ * AC100 codec/RTC chip. This serves as a placeholder for * board dts files to specify the source. */ - osc32k: osc32k_clk { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <1>; @@ -169,7 +169,7 @@ clock-output-names = "cpus"; }; - ahbs: ahbs_clk { + ahbs: ahbs-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -708,12 +708,12 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - r_ir_pins: r_ir { + r_ir_pins: r-ir { pins = "PL6"; function = "s_cir_rx"; }; - r_rsb_pins: r_rsb { + r_rsb_pins: r-rsb { pins = "PN0", "PN1"; function = "s_rsb"; drive-strength = <20>;
Some node names in the A80 DTSI still have underscores in them. Remove them in favour of hyphens to remove DTC warnings. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- arch/arm/boot/dts/sun9i-a80.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) -- git-series 0.9.1