mbox series

[v4,net-next,0/2] Add Seville Ethernet switch to T1040RDB

Message ID 20201002134106.3485970-1-vladimir.oltean@nxp.com
Headers show
Series Add Seville Ethernet switch to T1040RDB | expand

Message

Vladimir Oltean Oct. 2, 2020, 1:41 p.m. UTC 
Seville is a DSA switch that is embedded inside the T1040 SoC, and
supported by the mscc_seville DSA driver inside drivers/net/dsa/ocelot.

This series adds this switch to the SoC's dtsi files and to the T1040RDB
board file.

I would like to send this series through net-next. There is no conflict
with other patches submitted to T1040 device tree. Maybe this could at
least get an ACK from devicetree maintainers.

Vladimir Oltean (2):
  powerpc: dts: t1040: add bindings for Seville Ethernet switch
  powerpc: dts: t1040rdb: add ports for Seville Ethernet switch

 arch/powerpc/boot/dts/fsl/t1040rdb.dts      | 107 ++++++++++++++++++++
 arch/powerpc/boot/dts/fsl/t1040si-post.dtsi |  78 ++++++++++++++
 2 files changed, 185 insertions(+)

Comments

David Miller Oct. 4, 2020, 12:03 a.m. UTC | #1 
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Fri,  2 Oct 2020 16:41:04 +0300

> Seville is a DSA switch that is embedded inside the T1040 SoC, and
> supported by the mscc_seville DSA driver inside drivers/net/dsa/ocelot.
> 
> This series adds this switch to the SoC's dtsi files and to the T1040RDB
> board file.
> 
> I would like to send this series through net-next. There is no conflict
> with other patches submitted to T1040 device tree. Maybe this could at
> least get an ACK from devicetree maintainers.

Series applied, thank you.