diff mbox series

[net-next,10/33] veth: xdp using frame_sz in veth driver

Message ID 158757169184.1370371.6898362883018539033.stgit@firesoul
State New
Headers show
Series None | expand

Commit Message

Jesper Dangaard Brouer April 22, 2020, 4:08 p.m. UTC
The veth driver can run XDP in "native" mode in it's own NAPI
handler, and since commit 9fc8d518d9d5 ("veth: Handle xdp_frames in
xdp napi ring") packets can come in two forms either xdp_frame or
skb, calling respectively veth_xdp_rcv_one() or veth_xdp_rcv_skb().

For packets to arrive in xdp_frame format, they will have been
redirected from an XDP native driver. In case of XDP_PASS or no
XDP-prog attached, the veth driver will allocate and create an SKB.

The current code in veth_xdp_rcv_one() xdp_frame case, had to guess
the frame truesize of the incoming xdp_frame, when using
veth_build_skb(). With xdp_frame->frame_sz this is not longer
necessary.

Calculating the frame_sz in veth_xdp_rcv_skb() skb case, is done
similar to the XDP-generic handling code in net/core/dev.c.

Cc: Toshiaki Makita <toshiaki.makita1@gmail.com>
Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
---
 drivers/net/veth.c |   22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index d5691bb84448..b586d2fa5551 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -405,10 +405,6 @@  static struct sk_buff *veth_build_skb(void *head, int headroom, int len,
 {
 	struct sk_buff *skb;
 
-	if (!buflen) {
-		buflen = SKB_DATA_ALIGN(headroom + len) +
-			 SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-	}
 	skb = build_skb(head, buflen);
 	if (!skb)
 		return NULL;
@@ -583,6 +579,7 @@  static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 		xdp.data = frame->data;
 		xdp.data_end = frame->data + frame->len;
 		xdp.data_meta = frame->data - frame->metasize;
+		xdp.frame_sz = frame->frame_sz;
 		xdp.rxq = &rq->xdp_rxq;
 
 		act = bpf_prog_run_xdp(xdp_prog, &xdp);
@@ -629,7 +626,7 @@  static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 	rcu_read_unlock();
 
 	headroom = sizeof(struct xdp_frame) + frame->headroom - delta;
-	skb = veth_build_skb(hard_start, headroom, len, 0);
+	skb = veth_build_skb(hard_start, headroom, len, frame->frame_sz);
 	if (!skb) {
 		xdp_return_frame(frame);
 		stats->rx_drops++;
@@ -695,9 +692,8 @@  static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq,
 			goto drop;
 		}
 
-		nskb = veth_build_skb(head,
-				      VETH_XDP_HEADROOM + mac_len, skb->len,
-				      PAGE_SIZE);
+		nskb = veth_build_skb(head, VETH_XDP_HEADROOM + mac_len,
+				      skb->len, PAGE_SIZE);
 		if (!nskb) {
 			page_frag_free(head);
 			goto drop;
@@ -715,6 +711,11 @@  static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq,
 	xdp.data_end = xdp.data + pktlen;
 	xdp.data_meta = xdp.data;
 	xdp.rxq = &rq->xdp_rxq;
+
+	/* SKB "head" area always have tailroom for skb_shared_info */
+	xdp.frame_sz = (void *)skb_end_pointer(skb) - xdp.data_hard_start;
+	xdp.frame_sz += SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+
 	orig_data = xdp.data;
 	orig_data_end = xdp.data_end;
 
@@ -758,6 +759,7 @@  static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq,
 	}
 	rcu_read_unlock();
 
+	/* check if bpf_xdp_adjust_head was used */
 	delta = orig_data - xdp.data;
 	off = mac_len + delta;
 	if (off > 0)
@@ -765,9 +767,11 @@  static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq,
 	else if (off < 0)
 		__skb_pull(skb, -off);
 	skb->mac_header -= delta;
+
+	/* check if bpf_xdp_adjust_tail was used */
 	off = xdp.data_end - orig_data_end;
 	if (off != 0)
-		__skb_put(skb, off);
+		__skb_put(skb, off); /* positive on grow, negative on shrink */
 	skb->protocol = eth_type_trans(skb, rq->dev);
 
 	metalen = xdp.data - xdp.data_meta;