diff mbox series

[v13,net-next,01/15] doc: marvell: add CM3 address space and PPv2.3 description

Message ID 1613040542-16500-2-git-send-email-stefanc@marvell.com
State New
Headers show
Series net: mvpp2: Add TX Flow Control support | expand

Commit Message

Stefan Chulski Feb. 11, 2021, 10:48 a.m. UTC
From: Stefan Chulski <stefanc@marvell.com>

Patch adds CM3 address space and PPv2.3 description.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
---
 Documentation/devicetree/bindings/net/marvell-pp2.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

Comments

Russell King (Oracle) Feb. 11, 2021, 11:02 a.m. UTC | #1
On Thu, Feb 11, 2021 at 12:48:48PM +0200, stefanc@marvell.com wrote:
> From: Stefan Chulski <stefanc@marvell.com>
> 
> Patch adds CM3 address space and PPv2.3 description.
> 
> Signed-off-by: Stefan Chulski <stefanc@marvell.com>
> Acked-by: Marcin Wojtas <mw@semihalf.com>

It seems this is missing the ack that you got from Rob in your previous
posting. Your changelog says that only the module parameter was
removed, so I guess nothing changed in this patch.

Please wait to see if there are further comments before posting another
revision of this series.

Thanks.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
index b783976..ce15c17 100644
--- a/Documentation/devicetree/bindings/net/marvell-pp2.txt
+++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt
@@ -1,5 +1,6 @@ 
 * Marvell Armada 375 Ethernet Controller (PPv2.1)
   Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
+  Marvell CN913X Ethernet Controller (PPv2.3)
 
 Required properties:
 
@@ -12,10 +13,11 @@  Required properties:
 	- common controller registers
 	- LMS registers
 	- one register area per Ethernet port
-  For "marvell,armada-7k-pp2", must contain the following register
+  For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register
   sets:
 	- packet processor registers
 	- networking interfaces registers
+	- CM3 address space used for TX Flow Control
 
 - clocks: pointers to the reference clocks for this device, consequently:
 	- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
@@ -81,7 +83,7 @@  Example for marvell,armada-7k-pp2:
 
 cpm_ethernet: ethernet@0 {
 	compatible = "marvell,armada-7k-pp22";
-	reg = <0x0 0x100000>, <0x129000 0xb000>;
+	reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
 	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
 		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
 	clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";