diff mbox series

[net-next,v3,3/5] net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY release

Message ID 20201116111511.5061-4-kabel@kernel.org
State Superseded
Headers show
Series Support for RollBall 10G copper SFP modules | expand

Commit Message

Marek BehĂșn Nov. 16, 2020, 11:15 a.m. UTC
Instead of configuring the I2C mdiobus when SFP driver is probed,
create/destroy the mdiobus before the PHY is probed for/after it is
released.

This way we can tell the mdio-i2c code which protocol to use for each
SFP transceiver.

Signed-off-by: Marek BehĂșn <kabel@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/sfp.c | 30 ++++++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 3a4f34e5365a..c486caabb44a 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -217,6 +217,7 @@  struct sfp {
 	struct i2c_adapter *i2c;
 	struct mii_bus *i2c_mii;
 	struct sfp_bus *sfp_bus;
+	enum mdio_i2c_proto mdio_protocol;
 	struct phy_device *mod_phy;
 	const struct sff_data *type;
 	u32 max_power_mW;
@@ -399,9 +400,6 @@  static int sfp_i2c_write(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,
 
 static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
 {
-	struct mii_bus *i2c_mii;
-	int ret;
-
 	if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
 		return -EINVAL;
 
@@ -409,7 +407,15 @@  static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
 	sfp->read = sfp_i2c_read;
 	sfp->write = sfp_i2c_write;
 
-	i2c_mii = mdio_i2c_alloc(sfp->dev, i2c, MDIO_I2C_DEFAULT);
+	return 0;
+}
+
+static int sfp_i2c_mdiobus_create(struct sfp *sfp)
+{
+	struct mii_bus *i2c_mii;
+	int ret;
+
+	i2c_mii = mdio_i2c_alloc(sfp->dev, sfp->i2c, sfp->mdio_protocol);
 	if (IS_ERR(i2c_mii))
 		return PTR_ERR(i2c_mii);
 
@@ -427,6 +433,12 @@  static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
 	return 0;
 }
 
+static void sfp_i2c_mdiobus_destroy(struct sfp *sfp)
+{
+	mdiobus_unregister(sfp->i2c_mii);
+	sfp->i2c_mii = NULL;
+}
+
 /* Interface */
 static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
 {
@@ -1768,6 +1780,8 @@  static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
 	else
 		sfp->module_t_start_up = T_START_UP;
 
+	sfp->mdio_protocol = MDIO_I2C_DEFAULT;
+
 	return 0;
 }
 
@@ -1938,6 +1952,8 @@  static void sfp_sm_main(struct sfp *sfp, unsigned int event)
 			sfp_module_stop(sfp->sfp_bus);
 		if (sfp->mod_phy)
 			sfp_sm_phy_detach(sfp);
+		if (sfp->i2c_mii)
+			sfp_i2c_mdiobus_destroy(sfp);
 		sfp_module_tx_disable(sfp);
 		sfp_soft_stop_poll(sfp);
 		sfp_sm_next(sfp, SFP_S_DOWN, 0);
@@ -2000,6 +2016,12 @@  static void sfp_sm_main(struct sfp *sfp, unsigned int event)
 				     sfp->sm_fault_retries == N_FAULT_INIT);
 		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
 	init_done:
+			/* Create mdiobus and start trying for PHY */
+			ret = sfp_i2c_mdiobus_create(sfp);
+			if (ret < 0) {
+				sfp_sm_next(sfp, SFP_S_FAIL, 0);
+				break;
+			}
 			sfp->sm_phy_retries = R_PHY_RETRY;
 			goto phy_probe;
 		}