diff mbox series

[6/7] rtl8xxxu: Fix the reported rx signal strength

Message ID 20210514020442.946-7-code@reto-schneider.ch
State New
Headers show
Series rtl8xxxu/RTL8188CUS: Wi-Fi Alliance Certification | expand

Commit Message

Reto Schneider May 14, 2021, 2:04 a.m. UTC 
From: Chris Chiu <chiu@endlessos.org>

In rtl8xxxx_rx_query_desc for each chip in rtlwifi family, the
rx_status->signal is always the status->recvsignalpower + 10.

We also observe the same thing in air capture that the RSSI is
always ~10dBm higher than reported from driver.

Add this 10dBm to avoid confusion.

(cherry picked from commit e1a4f83da577474dfa23e85483a83eb7fb707edc)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
---

 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 0c997c360028..088e007e8bd0 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5319,6 +5319,11 @@  static void rtl8xxxu_rx_parse_phystats(struct rtl8xxxu_priv *priv,
 		rx_status->signal =
 			(phy_stats->cck_sig_qual_ofdm_pwdb_all >> 1) - 110;
 	}
+
+	// refers to rtlxxxx_rx_query_desc of rtlwifi/rtlxxxx/trx.c
+	// needs to verify on RTL8723BU
+	if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E)
+		rx_status->signal += 10;
 }
 
 static void rtl8xxxu_free_rx_resources(struct rtl8xxxu_priv *priv)