@@ -156,6 +156,7 @@ trace-events-subdirs += hw/vfio
trace-events-subdirs += hw/acpi
trace-events-subdirs += hw/arm
trace-events-subdirs += hw/alpha
+trace-events-subdirs += hw/hppa
trace-events-subdirs += hw/xen
trace-events-subdirs += hw/ide
trace-events-subdirs += ui
new file mode 100644
@@ -0,0 +1,40 @@
+/* HPPA cores and system support chips. */
+
+#define FIRMWARE_START 0xf0000000
+#define FIRMWARE_END 0xf0800000
+
+#define DEVICE_HPA_LEN 0x00100000
+
+#define GSC_HPA 0xffc00000
+#define DINO_HPA 0xfff80000
+#define DINO_UART_HPA 0xfff83000
+#define DINO_UART_BASE 0xfff83800
+#define DINO_SCSI_HPA 0xfff8c000
+#define LASI_HPA 0xffd00000
+#define LASI_UART_HPA 0xffd05000
+#define LASI_SCSI_HPA 0xffd06000
+#define LASI_LAN_HPA 0xffd07000
+#define LASI_LPT_HPA 0xffd02000
+#define LASI_AUDIO_HPA 0xffd04000
+#define LASI_PS2KBD_HPA 0xffd08000
+#define LASI_PS2MOU_HPA 0xffd08100
+#define LASI_GFX_HPA 0xf8000000
+#define CPU_HPA 0xfff10000
+#define MEMORY_HPA 0xfffbf000
+
+#define PCI_HPA DINO_HPA /* PCI bus */
+#define IDE_HPA 0xf9000000 /* Boot disc controller */
+
+/* offsets to DINO HPA: */
+#define DINO_PCI_ADDR 0x064
+#define DINO_CONFIG_DATA 0x068
+#define DINO_IO_DATA 0x06c
+
+#define PORT_PCI_CMD (PCI_HPA + DINO_PCI_ADDR)
+#define PORT_PCI_DATA (PCI_HPA + DINO_CONFIG_DATA)
+
+#define PORT_SERIAL1 (DINO_UART_HPA + 0x800)
+#define PORT_SERIAL2 (LASI_UART_HPA + 0x800)
+
+#define HPPA_MAX_CPUS 32 /* max. number of SMP CPUs */
+#define CPU_CLOCK_MHZ 250 /* emulate a 250 MHz CPU */
new file mode 100644
@@ -0,0 +1,24 @@
+/* HPPA cores and system support chips. */
+
+#ifndef HW_HPPA_SYS_H
+#define HW_HPPA_SYS_H
+
+#include "target/hppa/cpu-qom.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_host.h"
+#include "hw/ide.h"
+#include "hw/i386/pc.h"
+#include "hw/irq.h"
+
+#include "hw/hppa/hppa_hardware.h"
+
+PCIBus *dino_init(MemoryRegion *, qemu_irq *, qemu_irq *);
+
+#define TYPE_DINO_PCI_HOST_BRIDGE "dino-pcihost"
+
+/* hppa_pci.c. */
+extern const MemoryRegionOps hppa_pci_ignore_ops;
+extern const MemoryRegionOps hppa_pci_conf1_ops;
+extern const MemoryRegionOps hppa_pci_iack_ops;
+
+#endif
new file mode 100644
@@ -0,0 +1,518 @@
+/*
+ * HP-PARISC Dino PCI chipset emulation.
+ *
+ * (C) 2017 by Helge Deller <deller@gmx.de>
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ *
+ * Documentation available at:
+ * https://parisc.wiki.kernel.org/images-parisc/9/91/Dino_ers.pdf
+ * https://parisc.wiki.kernel.org/images-parisc/7/70/Dino_3_1_Errata.pdf
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "cpu.h"
+#include "hw/hw.h"
+#include "hw/devices.h"
+#include "sysemu/sysemu.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_bus.h"
+#include "hppa_sys.h"
+#include "exec/address-spaces.h"
+
+
+#define TYPE_DINO_PCI_HOST_BRIDGE "dino-pcihost"
+
+#define DINO_IAR0 0x004
+#define DINO_IODC 0x008
+#define DINO_IRR0 0x00C /* RO */
+#define DINO_IAR1 0x010
+#define DINO_IRR1 0x014 /* RO */
+#define DINO_IMR 0x018
+#define DINO_IPR 0x01C
+#define DINO_TOC_ADDR 0x020
+#define DINO_ICR 0x024
+#define DINO_ILR 0x028 /* RO */
+#define DINO_IO_COMMAND 0x030 /* WO */
+#define DINO_IO_STATUS 0x034 /* RO */
+#define DINO_IO_CONTROL 0x038
+#define DINO_IO_GSC_ERR_RESP 0x040 /* RO */
+#define DINO_IO_ERR_INFO 0x044 /* RO */
+#define DINO_IO_PCI_ERR_RESP 0x048 /* RO */
+#define DINO_IO_FBB_EN 0x05c
+#define DINO_IO_ADDR_EN 0x060
+#define DINO_PCI_CONFIG_ADDR 0x064
+#define DINO_PCI_CONFIG_DATA 0x068
+#define DINO_PCI_IO_DATA 0x06c
+#define DINO_PCI_MEM_DATA 0x070 /* Dino 3.x only */
+#define DINO_GSC2X_CONFIG 0x7b4 /* RO */
+#define DINO_GMASK 0x800
+#define DINO_PAMR 0x804
+#define DINO_PAPR 0x808
+#define DINO_DAMODE 0x80c
+#define DINO_PCICMD 0x810
+#define DINO_PCISTS 0x814 /* R/WC */
+#define DINO_MLTIM 0x81c
+#define DINO_BRDG_FEAT 0x820
+#define DINO_PCIROR 0x824
+#define DINO_PCIWOR 0x828
+#define DINO_TLTIM 0x830
+
+#define DINO_IRQS 11 /* bits 0-10 are architected */
+#define DINO_IRR_MASK 0x5ff /* only 10 bits are implemented */
+#define DINO_LOCAL_IRQS (DINO_IRQS + 1)
+#define DINO_MASK_IRQ(x) (1 << (x))
+
+#define PCIINTA 0x001
+#define PCIINTB 0x002
+#define PCIINTC 0x004
+#define PCIINTD 0x008
+#define PCIINTE 0x010
+#define PCIINTF 0x020
+#define GSCEXTINT 0x040
+/* #define xxx 0x080 - bit 7 is "default" */
+/* #define xxx 0x100 - bit 8 not used */
+/* #define xxx 0x200 - bit 9 not used */
+#define RS232INT 0x400
+
+#define DINO_MEM_CHUNK_SIZE (8 * 1024 * 1024) /* 8MB */
+
+#define DINO_PCI_HOST_BRIDGE(obj) \
+ OBJECT_CHECK(DinoState, (obj), TYPE_DINO_PCI_HOST_BRIDGE)
+
+typedef struct DinoState {
+ PCIHostState parent_obj;
+
+ /* PCI_CONFIG_ADDR is parent_obj.config_reg, via pci_host_conf_be_ops,
+ so that we can map PCI_CONFIG_DATA to pci_host_data_be_ops. */
+
+ uint32_t iar0;
+ uint32_t iar1;
+ uint32_t imr;
+ uint32_t ipr;
+ uint32_t icr;
+ uint32_t ilr;
+ uint32_t io_addr_en;
+ uint32_t io_control;
+
+ MemoryRegion this_mem;
+ MemoryRegion pci_mem;
+ MemoryRegion pci_mem_alias[32];
+
+ AddressSpace bm_as;
+ MemoryRegion bm;
+ MemoryRegion bm_ram_alias;
+ MemoryRegion bm_pci_alias;
+
+ MemoryRegion cpu0_eir_mem;
+} DinoState;
+
+/*
+ * Dino can forward memory accesses from the CPU in the range between
+ * 0xf0800000 and 0xff000000 to the PCI bus.
+ */
+static void gsc_to_pci_forwarding(DinoState *s)
+{
+ uint32_t io_addr_en, tmp;
+ int enabled, i;
+
+ tmp = extract32(s->io_control, 7, 2);
+ enabled = (tmp == 0x01);
+ io_addr_en = s->io_addr_en;
+
+ memory_region_transaction_begin();
+ for (i = 1; i < 31; i++) {
+ MemoryRegion *mem = &s->pci_mem_alias[i];
+ if (enabled && (io_addr_en & (1U << i))) {
+ if (!memory_region_is_mapped(mem)) {
+ uint32_t addr = 0xf0000000 + i * DINO_MEM_CHUNK_SIZE;
+ memory_region_add_subregion(get_system_memory(), addr, mem);
+ }
+ } else if (memory_region_is_mapped(mem)) {
+ memory_region_del_subregion(get_system_memory(), mem);
+ }
+ }
+ memory_region_transaction_commit();
+}
+
+static bool dino_chip_mem_valid(void *opaque, hwaddr addr,
+ unsigned size, bool is_write)
+{
+ switch (addr) {
+ case DINO_IAR0:
+ case DINO_IAR1:
+ case DINO_IRR0:
+ case DINO_IRR1:
+ case DINO_IMR:
+ case DINO_IPR:
+ case DINO_ICR:
+ case DINO_ILR:
+ case DINO_IO_CONTROL:
+ case DINO_IO_ADDR_EN:
+ case DINO_PCI_IO_DATA:
+ return true;
+ case DINO_PCI_IO_DATA + 2:
+ return size <= 2;
+ case DINO_PCI_IO_DATA + 1:
+ case DINO_PCI_IO_DATA + 3:
+ return size == 1;
+ }
+ return false;
+}
+
+static MemTxResult dino_chip_read_with_attrs(void *opaque, hwaddr addr,
+ uint64_t *data, unsigned size,
+ MemTxAttrs attrs)
+{
+ DinoState *s = opaque;
+ MemTxResult ret = MEMTX_OK;
+ AddressSpace *io;
+ uint16_t ioaddr;
+ uint32_t val;
+
+ switch (addr) {
+ case DINO_PCI_IO_DATA ... DINO_PCI_IO_DATA + 3:
+ /* Read from PCI IO space. */
+ io = &address_space_io;
+ ioaddr = s->parent_obj.config_reg;
+ switch (size) {
+ case 1:
+ val = address_space_ldub(io, ioaddr, attrs, &ret);
+ break;
+ case 2:
+ val = address_space_lduw_be(io, ioaddr, attrs, &ret);
+ break;
+ case 4:
+ val = address_space_ldl_be(io, ioaddr, attrs, &ret);
+ break;
+ default:
+ g_assert_not_reached();
+ }
+ break;
+
+ case DINO_IO_ADDR_EN:
+ val = s->io_addr_en;
+ break;
+ case DINO_IO_CONTROL:
+ val = s->io_control;
+ break;
+
+ case DINO_IAR0:
+ val = s->iar0;
+ break;
+ case DINO_IAR1:
+ val = s->iar1;
+ break;
+ case DINO_IMR:
+ val = s->imr;
+ break;
+ case DINO_ICR:
+ val = s->icr;
+ break;
+ case DINO_IPR:
+ val = s->ipr;
+ /* Any read to IPR clears the register. */
+ s->ipr = 0;
+ break;
+ case DINO_ILR:
+ val = s->ilr;
+ break;
+ case DINO_IRR0:
+ val = s->ilr & s->imr & ~s->icr;
+ break;
+ case DINO_IRR1:
+ val = s->ilr & s->imr & s->icr;
+ break;
+
+ default:
+ /* Controlled by dino_chip_mem_valid above. */
+ g_assert_not_reached();
+ }
+
+ *data = val;
+ return ret;
+}
+
+static MemTxResult dino_chip_write_with_attrs(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size,
+ MemTxAttrs attrs)
+{
+ DinoState *s = opaque;
+ AddressSpace *io;
+ MemTxResult ret;
+ uint16_t ioaddr;
+
+ switch (addr) {
+ case DINO_IO_DATA ... DINO_PCI_IO_DATA + 3:
+ /* Write into PCI IO space. */
+ io = &address_space_io;
+ ioaddr = s->parent_obj.config_reg;
+ switch (size) {
+ case 1:
+ address_space_stb(io, ioaddr, val, attrs, &ret);
+ break;
+ case 2:
+ address_space_stw_be(io, ioaddr, val, attrs, &ret);
+ break;
+ case 4:
+ address_space_stl_be(io, ioaddr, val, attrs, &ret);
+ break;
+ default:
+ g_assert_not_reached();
+ }
+ return ret;
+
+ case DINO_IO_ADDR_EN:
+ /* Never allow first (=firmware) and last (=Dino) areas. */
+ s->io_addr_en = val & 0x7ffffffe;
+ gsc_to_pci_forwarding(s);
+ break;
+ case DINO_IO_CONTROL:
+ s->io_control = val;
+ gsc_to_pci_forwarding(s);
+ break;
+
+ case DINO_IAR0:
+ s->iar0 = val;
+ break;
+ case DINO_IAR1:
+ s->iar1 = val;
+ break;
+ case DINO_IMR:
+ s->imr = val;
+ break;
+ case DINO_ICR:
+ s->icr = val;
+ break;
+ case DINO_IPR:
+ /* Any write to IPR clears the register. */
+ s->ipr = 0;
+ break;
+
+ case DINO_ILR:
+ case DINO_IRR0:
+ case DINO_IRR1:
+ /* These registers are read-only. */
+ break;
+
+ default:
+ /* Controlled by dino_chip_mem_valid above. */
+ g_assert_not_reached();
+ }
+ return MEMTX_OK;
+}
+
+static const MemoryRegionOps dino_chip_ops = {
+ .read_with_attrs = dino_chip_read_with_attrs,
+ .write_with_attrs = dino_chip_write_with_attrs,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 4,
+ .accepts = dino_chip_mem_valid,
+ },
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 4,
+ },
+};
+
+static const VMStateDescription vmstate_dino = {
+ .name = "Dino",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(iar0, DinoState),
+ VMSTATE_UINT32(iar1, DinoState),
+ VMSTATE_UINT32(imr, DinoState),
+ VMSTATE_UINT32(ipr, DinoState),
+ VMSTATE_UINT32(icr, DinoState),
+ VMSTATE_UINT32(ilr, DinoState),
+ VMSTATE_UINT32(io_addr_en, DinoState),
+ VMSTATE_UINT32(io_control, DinoState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+
+/* Unlike pci_config_data_le_ops, no check of high bit set in config_reg. */
+
+static uint64_t dino_config_data_read(void *opaque, hwaddr addr, unsigned len)
+{
+ PCIHostState *s = opaque;
+ return pci_data_read(s->bus, s->config_reg | (addr & 3), len);
+}
+
+static void dino_config_data_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned len)
+{
+ PCIHostState *s = opaque;
+ pci_data_write(s->bus, s->config_reg | (addr & 3), val, len);
+}
+
+static const MemoryRegionOps dino_config_data_ops = {
+ .read = dino_config_data_read,
+ .write = dino_config_data_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static AddressSpace *dino_pcihost_set_iommu(PCIBus *bus, void *opaque,
+ int devfn)
+{
+ DinoState *s = opaque;
+
+ return &s->bm_as;
+}
+
+/*
+ * Dino interrupts are connected as shown on Page 78, Table 23
+ * (Little-endian bit numbers)
+ * 0 PCI INTA
+ * 1 PCI INTB
+ * 2 PCI INTC
+ * 3 PCI INTD
+ * 4 PCI INTE
+ * 5 PCI INTF
+ * 6 GSC External Interrupt
+ * 7 Bus Error for "less than fatal" mode
+ * 8 PS2
+ * 9 Unused
+ * 10 RS232
+ */
+
+static void dino_set_irq(void *opaque, int irq, int level)
+{
+ DinoState *s = opaque;
+ uint32_t bit = 1u << irq;
+ uint32_t old_ilr = s->ilr;
+
+ if (level) {
+ uint32_t ena = bit & ~old_ilr;
+ s->ipr |= ena;
+ s->ilr = old_ilr | bit;
+ if (ena & s->imr) {
+ uint32_t iar = (ena & s->icr ? s->iar1 : s->iar0);
+ stl_be_phys(&address_space_memory, iar & -32, iar & 31);
+ }
+ } else {
+ s->ilr = old_ilr & ~bit;
+ }
+}
+
+static int dino_pci_map_irq(PCIDevice *d, int irq_num)
+{
+ int slot = d->devfn >> 3;
+ int local_irq;
+
+ assert(irq_num >= 0 && irq_num <= 3);
+
+ local_irq = slot & 0x03;
+
+ return local_irq;
+}
+
+static void dino_set_timer_irq(void *opaque, int irq, int level)
+{
+ /* ??? Not connected. */
+}
+
+static void dino_set_serial_irq(void *opaque, int irq, int level)
+{
+ dino_set_irq(opaque, 10, level);
+}
+
+PCIBus *dino_init(MemoryRegion *addr_space,
+ qemu_irq *p_rtc_irq, qemu_irq *p_ser_irq)
+{
+ DeviceState *dev;
+ DinoState *s;
+ PCIBus *b;
+ int i;
+
+ dev = qdev_create(NULL, TYPE_DINO_PCI_HOST_BRIDGE);
+ s = DINO_PCI_HOST_BRIDGE(dev);
+
+ /* Dino PCI access from main memory. */
+ memory_region_init_io(&s->this_mem, OBJECT(s), &dino_chip_ops,
+ s, "dino", 4096);
+ memory_region_add_subregion(addr_space, DINO_HPA, &s->this_mem);
+
+ /* Dino PCI config. */
+ memory_region_init_io(&s->parent_obj.conf_mem, OBJECT(&s->parent_obj),
+ &pci_host_conf_be_ops, dev, "pci-conf-idx", 4);
+ memory_region_init_io(&s->parent_obj.data_mem, OBJECT(&s->parent_obj),
+ &dino_config_data_ops, dev, "pci-conf-data", 4);
+ memory_region_add_subregion(&s->this_mem, DINO_PCI_CONFIG_ADDR,
+ &s->parent_obj.conf_mem);
+ memory_region_add_subregion(&s->this_mem, DINO_CONFIG_DATA,
+ &s->parent_obj.data_mem);
+
+ /* Dino PCI bus memory. */
+ memory_region_init(&s->pci_mem, OBJECT(s), "pci-memory", 1ull << 32);
+
+ b = pci_register_root_bus(dev, "pci", dino_set_irq, dino_pci_map_irq, s,
+ &s->pci_mem, get_system_io(),
+ PCI_DEVFN(0, 0), 32, TYPE_PCI_BUS);
+ s->parent_obj.bus = b;
+ qdev_init_nofail(dev);
+
+ /* Set up windows into PCI bus memory. */
+ for (i = 1; i < 31; i++) {
+ uint32_t addr = 0xf0000000 + i * DINO_MEM_CHUNK_SIZE;
+ char *name = g_strdup_printf("PCI Outbound Window %d", i);
+ memory_region_init_alias(&s->pci_mem_alias[i], OBJECT(s),
+ name, &s->pci_mem, addr,
+ DINO_MEM_CHUNK_SIZE);
+ }
+
+ /* Set up PCI view of memory: Bus master address space. */
+ memory_region_init(&s->bm, OBJECT(s), "bm-dino", 1ull << 32);
+ memory_region_init_alias(&s->bm_ram_alias, OBJECT(s),
+ "bm-system", addr_space, 0,
+ 0xf0000000 + DINO_MEM_CHUNK_SIZE);
+ memory_region_init_alias(&s->bm_pci_alias, OBJECT(s),
+ "bm-pci", &s->pci_mem,
+ 0xf0000000 + DINO_MEM_CHUNK_SIZE,
+ 31 * DINO_MEM_CHUNK_SIZE);
+ memory_region_add_subregion(&s->bm, 0,
+ &s->bm_ram_alias);
+ memory_region_add_subregion(&s->bm,
+ 0xf0000000 + DINO_MEM_CHUNK_SIZE,
+ &s->bm_pci_alias);
+ address_space_init(&s->bm_as, &s->bm, "pci-bm");
+ pci_setup_iommu(b, dino_pcihost_set_iommu, s);
+
+ *p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
+ *p_ser_irq = qemu_allocate_irq(dino_set_serial_irq, s, 0);
+
+ return b;
+}
+
+static int dino_pcihost_init(SysBusDevice *dev)
+{
+ return 0;
+}
+
+static void dino_pcihost_class_init(ObjectClass *klass, void *data)
+{
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ k->init = dino_pcihost_init;
+ dc->vmsd = &vmstate_dino;
+}
+
+static const TypeInfo dino_pcihost_info = {
+ .name = TYPE_DINO_PCI_HOST_BRIDGE,
+ .parent = TYPE_PCI_HOST_BRIDGE,
+ .instance_size = sizeof(DinoState),
+ .class_init = dino_pcihost_class_init,
+};
+
+static void dino_register_types(void)
+{
+ type_register_static(&dino_pcihost_info);
+}
+
+type_init(dino_register_types)
@@ -16,20 +16,264 @@
#include "hw/ide.h"
#include "hw/timer/i8254.h"
#include "hw/char/serial.h"
+#include "hw/hppa/hppa_sys.h"
#include "qemu/cutils.h"
#include "qapi/error.h"
+#define MAX_IDE_BUS 2
+
+static ISABus *hppa_isa_bus(void)
+{
+ ISABus *isa_bus;
+ qemu_irq *isa_irqs;
+ MemoryRegion *isa_region;
+
+ isa_region = g_new(MemoryRegion, 1);
+ memory_region_init_io(isa_region, NULL, &hppa_pci_ignore_ops,
+ NULL, "isa-io", 0x800);
+ memory_region_add_subregion(get_system_memory(), IDE_HPA,
+ isa_region);
+
+ isa_bus = isa_bus_new(NULL, get_system_memory(), isa_region,
+ &error_abort);
+ isa_irqs = i8259_init(isa_bus,
+ /* qemu_allocate_irq(dino_set_isa_irq, s, 0)); */
+ NULL);
+ isa_bus_irqs(isa_bus, isa_irqs);
+
+ return isa_bus;
+}
+
+static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)
+{
+ addr &= (0x10000000 - 1);
+ return addr;
+}
+
+static HPPACPU *cpu[HPPA_MAX_CPUS];
+static uint64_t firmware_entry;
static void machine_hppa_init(MachineState *machine)
{
+ const char *kernel_filename = machine->kernel_filename;
+ const char *kernel_cmdline = machine->kernel_cmdline;
+ const char *initrd_filename = machine->initrd_filename;
+ PCIBus *pci_bus;
+ ISABus *isa_bus;
+ qemu_irq rtc_irq, serial_irq;
+ char *firmware_filename;
+ uint64_t firmware_low, firmware_high;
+ long size;
+ uint64_t kernel_entry = 0, kernel_low, kernel_high;
+ MemoryRegion *addr_space = get_system_memory();
+ MemoryRegion *rom_region;
+ MemoryRegion *ram_region;
+ MemoryRegion *cpu_region;
+ long i;
+
+ ram_size = machine->ram_size;
+
+ /* Create CPUs. */
+ for (i = 0; i < smp_cpus; i++) {
+ cpu[i] = HPPA_CPU(cpu_create(machine->cpu_type));
+
+ cpu_region = g_new(MemoryRegion, 1);
+ memory_region_init_io(cpu_region, OBJECT(cpu[i]), &hppa_io_eir_ops,
+ cpu[i], g_strdup_printf("cpu%ld-io-eir", i), 4);
+ memory_region_add_subregion(addr_space, CPU_HPA + i * 0x1000,
+ cpu_region);
+ }
+
+ /* Limit main memory. */
+ if (ram_size > FIRMWARE_START) {
+ machine->ram_size = ram_size = FIRMWARE_START;
+ }
+
+ /* Main memory region. */
+ ram_region = g_new(MemoryRegion, 1);
+ memory_region_allocate_system_memory(ram_region, OBJECT(machine),
+ "ram", ram_size);
+ memory_region_add_subregion(addr_space, 0, ram_region);
+
+ /* Init Dino (PCI host bus chip). */
+ pci_bus = dino_init(addr_space, &rtc_irq, &serial_irq);
+ assert(pci_bus);
+
+ /* Create ISA bus. */
+ isa_bus = hppa_isa_bus();
+ assert(isa_bus);
+
+ /* Realtime clock, used by firmware for PDC_TOD call. */
+ mc146818_rtc_init(isa_bus, 2000, rtc_irq);
+
+ /* Serial code setup. */
+ if (serial_hds[0]) {
+ uint32_t addr = DINO_UART_HPA + 0x800;
+ serial_mm_init(addr_space, addr, 0, serial_irq,
+ 115200, serial_hds[0], DEVICE_BIG_ENDIAN);
+ fprintf(stderr, "Serial port created at 0x%x\n", addr);
+ }
+
+ /* SCSI disk setup. */
+ lsi53c895a_create(pci_bus);
+
+ /* Network setup. e1000 is good enough, failing Tulip support. */
+ for (i = 0; i < nb_nics; i++) {
+ pci_nic_init_nofail(&nd_table[i], pci_bus, "e1000", NULL);
+ }
+
+ /* Load firmware. Given that this is not "real" firmware,
+ but one explicitly written for the emulation, we might as
+ well load it directly from an ELF image. */
+ firmware_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS,
+ bios_name ? bios_name :
+ "hppa-firmware.img");
+ if (firmware_filename == NULL) {
+ error_report("no firmware provided");
+ exit(1);
+ }
+
+ size = load_elf(firmware_filename, NULL,
+ NULL, &firmware_entry, &firmware_low, &firmware_high,
+ true, EM_PARISC, 0, 0);
+
+ /* Unfortunately, load_elf sign-extends reading elf32. */
+ firmware_entry = (target_ureg)firmware_entry;
+ firmware_low = (target_ureg)firmware_low;
+ firmware_high = (target_ureg)firmware_high;
+
+ if (size < 0) {
+ error_report("could not load firmware '%s'", firmware_filename);
+ exit(1);
+ }
+ fprintf(stderr, "Firmware loaded at 0x%08lx-0x%08lx, entry at 0x%08lx.\n",
+ firmware_low, firmware_high, firmware_entry);
+ if (firmware_low < ram_size || firmware_high >= FIRMWARE_END) {
+ error_report("Firmware overlaps with memory or IO space");
+ exit(1);
+ }
+ g_free(firmware_filename);
+
+ rom_region = g_new(MemoryRegion, 1);
+ memory_region_allocate_system_memory(rom_region, OBJECT(machine),
+ "firmware",
+ (FIRMWARE_END - FIRMWARE_START));
+ memory_region_add_subregion(addr_space, FIRMWARE_START, rom_region);
+
+ /* Load kernel */
+ if (kernel_filename) {
+ fprintf(stderr, "LOADING kernel '%s'\n", kernel_filename);
+ size = load_elf(kernel_filename, &cpu_hppa_to_phys,
+ NULL, &kernel_entry, &kernel_low, &kernel_high,
+ true, EM_PARISC, 0, 0);
+
+ /* Unfortunately, load_elf sign-extends reading elf32. */
+ kernel_entry = (target_ureg) cpu_hppa_to_phys(NULL, kernel_entry);
+ kernel_low = (target_ureg)kernel_low;
+ kernel_high = (target_ureg)kernel_high;
+
+ if (size < 0) {
+ error_report("could not load kernel '%s'", kernel_filename);
+ exit(1);
+ }
+
+ fprintf(stderr, "Kernel loaded at 0x%08lx-0x%08lx, entry at 0x%08lx, "
+ "size %ld kB.\n",
+ kernel_low, kernel_high, kernel_entry, size / 1024);
+
+ if (kernel_cmdline) {
+ cpu[0]->env.gr[24] = 0x4000;
+ pstrcpy_targphys("cmdline", cpu[0]->env.gr[24],
+ TARGET_PAGE_SIZE, kernel_cmdline);
+ }
+
+ if (initrd_filename) {
+ ram_addr_t initrd_base;
+ long initrd_size;
+
+ initrd_size = get_image_size(initrd_filename);
+ if (initrd_size < 0) {
+ error_report("could not load initial ram disk '%s'",
+ initrd_filename);
+ exit(1);
+ }
+
+ /* Load the initrd image high in memory.
+ Mirror the algorithm used by palo:
+ (1) Due to sign-extension problems and PDC,
+ put the initrd no higher than 1G.
+ (2) Reserve 64k for stack. */
+ initrd_base = MIN(ram_size, 1024 * 1024 * 1024);
+ initrd_base = initrd_base - 64 * 1024;
+ initrd_base = (initrd_base - initrd_size) & TARGET_PAGE_MASK;
+
+ if (initrd_base < kernel_high) {
+ error_report("kernel and initial ram disk too large!");
+ exit(1);
+ }
+
+ load_image_targphys(initrd_filename, initrd_base, initrd_size);
+ cpu[0]->env.gr[23] = initrd_base;
+ cpu[0]->env.gr[22] = initrd_base + initrd_size;
+ }
+ }
+
+ if (!kernel_entry) {
+ /* When booting via firmware, tell firmware if we want interactive
+ * mode (kernel_entry=1), and to boot from CD (gr[24]='d')
+ * or hard disc * (gr[24]='c').
+ */
+ kernel_entry = boot_menu ? 1 : 0;
+ cpu[0]->env.gr[24] = machine->boot_order[0];
+ }
+
+ /* We jump to the firmware entry routine and pass the
+ * various parameters in registers. After firmware initialization,
+ * firmware will start the Linux kernel with ramdisk and cmdline.
+ */
+ cpu[0]->env.gr[26] = ram_size;
+ cpu[0]->env.gr[25] = kernel_entry;
+
+ /* tell firmware how many SMP CPUs to present in inventory table */
+ cpu[0]->env.gr[21] = smp_cpus;
}
+static void hppa_machine_reset(void)
+{
+ int i;
+
+ qemu_devices_reset();
+
+ /* Start all CPUs at the firmware entry point.
+ * Monarch CPU will initialize firmware, secondary CPUs
+ * will enter a small idle look and wait for rendevouz. */
+ for (i = 0; i < smp_cpus; i++) {
+ cpu_set_pc(CPU(cpu[i]), firmware_entry);
+ cpu[i]->env.gr[5] = CPU_HPA + i * 0x1000;
+ }
+
+ /* already initialized by machine_hppa_init()? */
+ if (cpu[0]->env.gr[26] == ram_size) {
+ return;
+ }
+
+ cpu[0]->env.gr[26] = ram_size;
+ cpu[0]->env.gr[25] = 0; /* no firmware boot menu */
+ cpu[0]->env.gr[24] = 'c';
+ /* gr22/gr23 unused, no initrd while reboot. */
+ cpu[0]->env.gr[21] = smp_cpus;
+}
+
+
static void machine_hppa_machine_init(MachineClass *mc)
{
mc->desc = "HPPA generic machine";
+ mc->default_cpu_type = TYPE_HPPA_CPU;
mc->init = machine_hppa_init;
+ mc->reset = hppa_machine_reset;
mc->block_default_type = IF_SCSI;
- mc->max_cpus = 1;
+ mc->max_cpus = HPPA_MAX_CPUS;
+ mc->default_cpus = 1;
mc->is_default = 1;
mc->default_ram_size = 512 * M_BYTE;
mc->default_boot_order = "cd";
new file mode 100644
@@ -0,0 +1,90 @@
+/*
+ * QEMU HP-PARISC PCI support functions.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "hppa_sys.h"
+#include "qemu/log.h"
+#include "sysemu/sysemu.h"
+#include "trace.h"
+
+
+/* Fallback for unassigned PCI I/O operations. Avoids MCHK. */
+
+static uint64_t ignore_read(void *opaque, hwaddr addr, unsigned size)
+{
+ return 0;
+}
+
+static void ignore_write(void *opaque, hwaddr addr, uint64_t v, unsigned size)
+{
+}
+
+const MemoryRegionOps hppa_pci_ignore_ops = {
+ .read = ignore_read,
+ .write = ignore_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ },
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ },
+};
+
+
+/* PCI config space reads/writes, to byte-word addressable memory. */
+static uint64_t bw_conf1_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ PCIBus *b = opaque;
+ return pci_data_read(b, addr, size);
+}
+
+static void bw_conf1_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ PCIBus *b = opaque;
+ pci_data_write(b, addr, val, size);
+}
+
+const MemoryRegionOps hppa_pci_conf1_ops = {
+ .read = bw_conf1_read,
+ .write = bw_conf1_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 4,
+ },
+};
+
+/* PCI/EISA Interrupt Acknowledge Cycle. */
+
+static uint64_t iack_read(void *opaque, hwaddr addr, unsigned size)
+{
+ return pic_read_irq(isa_pic);
+}
+
+static void special_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ trace_hppa_pci_iack_write();
+}
+
+const MemoryRegionOps hppa_pci_iack_ops = {
+ .read = iack_read,
+ .write = special_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+};
new file mode 100644
@@ -0,0 +1,14 @@
+include pci.mak
+include usb.mak
+CONFIG_SERIAL=y
+CONFIG_SERIAL_ISA=y
+CONFIG_ISA_BUS=y
+CONFIG_I8259=y
+CONFIG_VIRTIO_PCI=$(CONFIG_PCI)
+CONFIG_VIRTIO=y
+CONFIG_E1000_PCI=y
+CONFIG_IDE_ISA=y
+CONFIG_IDE_CMD646=y
+# CONFIG_IDE_MMIO=y
+CONFIG_VIRTIO_VGA=y
+CONFIG_MC146818RTC=y
@@ -1 +1 @@
-obj-y += machine.o
+obj-y += machine.o pci.o dino.o
new file mode 100644
@@ -0,0 +1,4 @@
+# See docs/devel/tracing.txt for syntax documentation.
+
+# hw/hppa/pci.c
+hppa_pci_iack_write(void) ""