@@ -4,7 +4,6 @@ devices-dirs-y += acpi/
devices-dirs-y += adc/
devices-dirs-y += audio/
devices-dirs-y += block/
-devices-dirs-y += char/
endif
common-obj-y += $(devices-dirs-y)
deleted file mode 100644
@@ -1,39 +0,0 @@
-common-obj-$(CONFIG_IPACK) += ipoctal232.o
-common-obj-$(CONFIG_ESCC) += escc.o
-common-obj-$(CONFIG_NRF51_SOC) += nrf51_uart.o
-common-obj-$(CONFIG_PARALLEL) += parallel.o
-common-obj-$(CONFIG_ISA_BUS) += parallel-isa.o
-common-obj-$(CONFIG_PL011) += pl011.o
-common-obj-$(CONFIG_SERIAL) += serial.o
-common-obj-$(CONFIG_SERIAL_ISA) += serial-isa.o
-common-obj-$(CONFIG_SERIAL_PCI) += serial-pci.o
-common-obj-$(CONFIG_SERIAL_PCI_MULTI) += serial-pci-multi.o
-common-obj-$(CONFIG_VIRTIO_SERIAL) += virtio-console.o
-common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
-common-obj-$(CONFIG_XEN) += xen_console.o
-common-obj-$(CONFIG_CADENCE) += cadence_uart.o
-common-obj-$(CONFIG_IBEX) += ibex_uart.o
-
-common-obj-$(CONFIG_EXYNOS4) += exynos4210_uart.o
-common-obj-$(CONFIG_COLDFIRE) += mcf_uart.o
-common-obj-$(CONFIG_OMAP) += omap_uart.o
-common-obj-$(CONFIG_SH4) += sh_serial.o
-common-obj-$(CONFIG_DIGIC) += digic-uart.o
-common-obj-$(CONFIG_STM32F2XX_USART) += stm32f2xx_usart.o
-common-obj-$(CONFIG_RASPI) += bcm2835_aux.o
-common-obj-$(CONFIG_RENESAS_SCI) += renesas_sci.o
-common-obj-$(CONFIG_AVR_USART) += avr_usart.o
-
-common-obj-$(CONFIG_CMSDK_APB_UART) += cmsdk-apb-uart.o
-common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o
-common-obj-$(CONFIG_ISA_DEBUG) += debugcon.o
-common-obj-$(CONFIG_GRLIB) += grlib_apbuart.o
-common-obj-$(CONFIG_IMX) += imx_serial.o
-common-obj-$(CONFIG_LM32) += lm32_juart.o
-common-obj-$(CONFIG_LM32) += lm32_uart.o
-common-obj-$(CONFIG_MILKYMIST) += milkymist-uart.o
-common-obj-$(CONFIG_SCLPCONSOLE) += sclpconsole.o sclpconsole-lm.o
-
-obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o
-obj-$(CONFIG_PSERIES) += spapr_vty.o
-obj-$(CONFIG_TERMINAL3270) += terminal3270.o
new file mode 100644
@@ -0,0 +1,38 @@
+softmmu_ss.add(when: 'CONFIG_CADENCE', if_true: files('cadence_uart.c'))
+softmmu_ss.add(when: 'CONFIG_CMSDK_APB_UART', if_true: files('cmsdk-apb-uart.c'))
+softmmu_ss.add(when: 'CONFIG_ESCC', if_true: files('escc.c'))
+softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_ser.c'))
+softmmu_ss.add(when: 'CONFIG_GRLIB', if_true: files('grlib_apbuart.c'))
+softmmu_ss.add(when: 'CONFIG_IBEX', if_true: files('ibex_uart.c'))
+softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('imx_serial.c'))
+softmmu_ss.add(when: 'CONFIG_IPACK', if_true: files('ipoctal232.c'))
+softmmu_ss.add(when: 'CONFIG_ISA_BUS', if_true: files('parallel-isa.c'))
+softmmu_ss.add(when: 'CONFIG_ISA_DEBUG', if_true: files('debugcon.c'))
+softmmu_ss.add(when: 'CONFIG_LM32', if_true: files('lm32_juart.c'))
+softmmu_ss.add(when: 'CONFIG_LM32', if_true: files('lm32_uart.c'))
+softmmu_ss.add(when: 'CONFIG_MILKYMIST', if_true: files('milkymist-uart.c'))
+softmmu_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_uart.c'))
+softmmu_ss.add(when: 'CONFIG_PARALLEL', if_true: files('parallel.c'))
+softmmu_ss.add(when: 'CONFIG_PL011', if_true: files('pl011.c'))
+softmmu_ss.add(when: 'CONFIG_SCLPCONSOLE', if_true: files('sclpconsole.c', 'sclpconsole-lm.c'))
+softmmu_ss.add(when: 'CONFIG_SERIAL', if_true: files('serial.c'))
+softmmu_ss.add(when: 'CONFIG_SERIAL_ISA', if_true: files('serial-isa.c'))
+softmmu_ss.add(when: 'CONFIG_SERIAL_PCI', if_true: files('serial-pci.c'))
+softmmu_ss.add(when: 'CONFIG_SERIAL_PCI_MULTI', if_true: files('serial-pci-multi.c'))
+softmmu_ss.add(when: 'CONFIG_VIRTIO_SERIAL', if_true: files('virtio-console.c'))
+softmmu_ss.add(when: 'CONFIG_XEN', if_true: files('xen_console.c'))
+softmmu_ss.add(when: 'CONFIG_XILINX', if_true: files('xilinx_uartlite.c'))
+
+softmmu_ss.add(when: 'CONFIG_AVR_USART', if_true: files('avr_usart.c'))
+softmmu_ss.add(when: 'CONFIG_COLDFIRE', if_true: files('mcf_uart.c'))
+softmmu_ss.add(when: 'CONFIG_DIGIC', if_true: files('digic-uart.c'))
+softmmu_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_uart.c'))
+softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_uart.c'))
+softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_aux.c'))
+softmmu_ss.add(when: 'CONFIG_RENESAS_SCI', if_true: files('renesas_sci.c'))
+softmmu_ss.add(when: 'CONFIG_SH4', if_true: files('sh_serial.c'))
+softmmu_ss.add(when: 'CONFIG_STM32F2XX_USART', if_true: files('stm32f2xx_usart.c'))
+
+specific_ss.add(when: 'CONFIG_TERMINAL3270', if_true: files('terminal3270.c'))
+specific_ss.add(when: 'CONFIG_VIRTIO', if_true: files('virtio-serial-bus.c'))
+specific_ss.add(when: 'CONFIG_PSERIES', if_true: files('spapr_vty.c'))
@@ -1,3 +1,4 @@
+subdir('char')
subdir('core')
subdir('cpu')
subdir('display')