diff mbox series

[PULL,37/49] hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts

Message ID 20210305171515.1038-38-peter.maydell@linaro.org
State Accepted
Commit 424182791bae6dc9526b7e6d149848f237dbc046
Headers show
Series target-arm queue | expand

Commit Message

Peter Maydell March 5, 2021, 5:15 p.m. UTC
The mps2-tz code uses PPCPortInfo data structures to define what
devices are present and how they are wired up.  Currently we use
these to specify device types and addresses, but hard-code the
interrupt line wiring in each make_* helper function.  This works for
the two boards we have at the moment, but the AN524 has some devices
with different interrupt assignments.

This commit adds the framework to allow PPCPortInfo structures to
specify interrupt numbers.  We add an array of interrupt numbers to
the PPCPortInfo struct, and pass it through to the make_* helpers.
The following commit will change the make_* helpers over to using the
framework.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Message-id: 20210215115138.20465-13-peter.maydell@linaro.org
---
 hw/arm/mps2-tz.c | 36 ++++++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 12 deletions(-)

-- 
2.20.1
diff mbox series

Patch

diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index b9b1351fa74..34ea3389bd1 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -170,7 +170,8 @@  static qemu_irq get_sse_irq_in(MPS2TZMachineState *mms, int irqno)
  * needs to be plugged into the downstream end of the PPC port.
  */
 typedef MemoryRegion *MakeDevFn(MPS2TZMachineState *mms, void *opaque,
-                                const char *name, hwaddr size);
+                                const char *name, hwaddr size,
+                                const int *irqs);
 
 typedef struct PPCPortInfo {
     const char *name;
@@ -178,6 +179,7 @@  typedef struct PPCPortInfo {
     void *opaque;
     hwaddr addr;
     hwaddr size;
+    int irqs[3]; /* currently no device needs more IRQ lines than this */
 } PPCPortInfo;
 
 typedef struct PPCInfo {
@@ -186,8 +188,9 @@  typedef struct PPCInfo {
 } PPCInfo;
 
 static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms,
-                                       void *opaque,
-                                       const char *name, hwaddr size)
+                                    void *opaque,
+                                    const char *name, hwaddr size,
+                                    const int *irqs)
 {
     /* Initialize, configure and realize a TYPE_UNIMPLEMENTED_DEVICE,
      * and return a pointer to its MemoryRegion.
@@ -202,7 +205,8 @@  static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms,
 }
 
 static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque,
-                               const char *name, hwaddr size)
+                               const char *name, hwaddr size,
+                               const int *irqs)
 {
     MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms);
     CMSDKAPBUART *uart = opaque;
@@ -227,7 +231,8 @@  static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque,
 }
 
 static MemoryRegion *make_scc(MPS2TZMachineState *mms, void *opaque,
-                              const char *name, hwaddr size)
+                              const char *name, hwaddr size,
+                              const int *irqs)
 {
     MPS2SCC *scc = opaque;
     DeviceState *sccdev;
@@ -249,7 +254,8 @@  static MemoryRegion *make_scc(MPS2TZMachineState *mms, void *opaque,
 }
 
 static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, void *opaque,
-                                 const char *name, hwaddr size)
+                                 const char *name, hwaddr size,
+                                 const int *irqs)
 {
     MPS2FPGAIO *fpgaio = opaque;
     MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms);
@@ -262,7 +268,8 @@  static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, void *opaque,
 }
 
 static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque,
-                                  const char *name, hwaddr size)
+                                  const char *name, hwaddr size,
+                                  const int *irqs)
 {
     SysBusDevice *s;
     NICInfo *nd = &nd_table[0];
@@ -281,7 +288,8 @@  static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque,
 }
 
 static MemoryRegion *make_mpc(MPS2TZMachineState *mms, void *opaque,
-                              const char *name, hwaddr size)
+                              const char *name, hwaddr size,
+                              const int *irqs)
 {
     TZMPC *mpc = opaque;
     int i = mpc - &mms->ssram_mpc[0];
@@ -318,7 +326,8 @@  static MemoryRegion *make_mpc(MPS2TZMachineState *mms, void *opaque,
 }
 
 static MemoryRegion *make_dma(MPS2TZMachineState *mms, void *opaque,
-                              const char *name, hwaddr size)
+                              const char *name, hwaddr size,
+                              const int *irqs)
 {
     PL080State *dma = opaque;
     int i = dma - &mms->dma[0];
@@ -373,7 +382,8 @@  static MemoryRegion *make_dma(MPS2TZMachineState *mms, void *opaque,
 }
 
 static MemoryRegion *make_spi(MPS2TZMachineState *mms, void *opaque,
-                              const char *name, hwaddr size)
+                              const char *name, hwaddr size,
+                              const int *irqs)
 {
     /*
      * The AN505 has five PL022 SPI controllers.
@@ -395,7 +405,8 @@  static MemoryRegion *make_spi(MPS2TZMachineState *mms, void *opaque,
 }
 
 static MemoryRegion *make_i2c(MPS2TZMachineState *mms, void *opaque,
-                              const char *name, hwaddr size)
+                              const char *name, hwaddr size,
+                              const int *irqs)
 {
     ArmSbconI2CState *i2c = opaque;
     SysBusDevice *s;
@@ -604,7 +615,8 @@  static void mps2tz_common_init(MachineState *machine)
                 continue;
             }
 
-            mr = pinfo->devfn(mms, pinfo->opaque, pinfo->name, pinfo->size);
+            mr = pinfo->devfn(mms, pinfo->opaque, pinfo->name, pinfo->size,
+                              pinfo->irqs);
             portname = g_strdup_printf("port[%d]", port);
             object_property_set_link(OBJECT(ppc), portname, OBJECT(mr),
                                      &error_fatal);