diff mbox series

[PULL,04/43] hw/arm/xilinx_zynq: Support up to two CPU cores

Message ID 20240531120401.394550-5-peter.maydell@linaro.org
State Accepted
Commit ddcf58e044ce02864170b41785344407cb821e12
Headers show
Series [PULL,01/43] hw/intc/arm_gic: Fix set pending of PPIs | expand

Commit Message

Peter Maydell May 31, 2024, 12:03 p.m. UTC
From: Sebastian Huber <sebastian.huber@embedded-brains.de>

The Zynq 7000 SoCs contain two Arm Cortex-A9 MPCore (the Zynq 7000S have only
one core).  Add support for up to two simulated cores.

Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Message-id: 20240524120837.10057-3-sebastian.huber@embedded-brains.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: removed unnecessary double-cast]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/xilinx_zynq.c | 54 +++++++++++++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 21 deletions(-)
diff mbox series

Patch

diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
index 0abb62f131d..7f7a3d23fbe 100644
--- a/hw/arm/xilinx_zynq.c
+++ b/hw/arm/xilinx_zynq.c
@@ -84,9 +84,12 @@  static const int dma_irqs[8] = {
     0xe3401000 + ARMV7_IMM16(extract32((val), 16, 16)), /* movt r1 ... */ \
     0xe5801000 + (addr)
 
+#define ZYNQ_MAX_CPUS 2
+
 struct ZynqMachineState {
     MachineState parent;
     Clock *ps_clk;
+    ARMCPU *cpu[ZYNQ_MAX_CPUS];
 };
 
 static void zynq_write_board_setup(ARMCPU *cpu,
@@ -176,13 +179,13 @@  static inline int zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq,
 static void zynq_init(MachineState *machine)
 {
     ZynqMachineState *zynq_machine = ZYNQ_MACHINE(machine);
-    ARMCPU *cpu;
     MemoryRegion *address_space_mem = get_system_memory();
     MemoryRegion *ocm_ram = g_new(MemoryRegion, 1);
     DeviceState *dev, *slcr;
     SysBusDevice *busdev;
     qemu_irq pic[64];
     int n;
+    unsigned int smp_cpus = machine->smp.cpus;
 
     /* max 2GB ram */
     if (machine->ram_size > 2 * GiB) {
@@ -190,22 +193,27 @@  static void zynq_init(MachineState *machine)
         exit(EXIT_FAILURE);
     }
 
-    cpu = ARM_CPU(object_new(machine->cpu_type));
+    for (n = 0; n < smp_cpus; n++) {
+        Object *cpuobj = object_new(machine->cpu_type);
 
-    /* By default A9 CPUs have EL3 enabled.  This board does not
-     * currently support EL3 so the CPU EL3 property is disabled before
-     * realization.
-     */
-    if (object_property_find(OBJECT(cpu), "has_el3")) {
-        object_property_set_bool(OBJECT(cpu), "has_el3", false, &error_fatal);
+        /*
+         * By default A9 CPUs have EL3 enabled.  This board does not currently
+         * support EL3 so the CPU EL3 property is disabled before realization.
+         */
+        if (object_property_find(cpuobj, "has_el3")) {
+            object_property_set_bool(cpuobj, "has_el3", false, &error_fatal);
+        }
+
+        object_property_set_int(cpuobj, "midr", ZYNQ_BOARD_MIDR,
+                                &error_fatal);
+        object_property_set_int(cpuobj, "reset-cbar", MPCORE_PERIPHBASE,
+                                &error_fatal);
+
+        qdev_realize(DEVICE(cpuobj), NULL, &error_fatal);
+
+        zynq_machine->cpu[n] = ARM_CPU(cpuobj);
     }
 
-    object_property_set_int(OBJECT(cpu), "midr", ZYNQ_BOARD_MIDR,
-                            &error_fatal);
-    object_property_set_int(OBJECT(cpu), "reset-cbar", MPCORE_PERIPHBASE,
-                            &error_fatal);
-    qdev_realize(DEVICE(cpu), NULL, &error_fatal);
-
     /* DDR remapped to address zero.  */
     memory_region_add_subregion(address_space_mem, 0, machine->ram);
 
@@ -237,15 +245,19 @@  static void zynq_init(MachineState *machine)
     sysbus_mmio_map(SYS_BUS_DEVICE(slcr), 0, 0xF8000000);
 
     dev = qdev_new(TYPE_A9MPCORE_PRIV);
-    qdev_prop_set_uint32(dev, "num-cpu", 1);
+    qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
     busdev = SYS_BUS_DEVICE(dev);
     sysbus_realize_and_unref(busdev, &error_fatal);
     sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
+    zynq_binfo.gic_cpu_if_addr = MPCORE_PERIPHBASE + 0x100;
     sysbus_create_varargs("l2x0", MPCORE_PERIPHBASE + 0x2000, NULL);
-    sysbus_connect_irq(busdev, 0,
-                       qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ));
-    sysbus_connect_irq(busdev, 1,
-                       qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ));
+    for (n = 0; n < smp_cpus; n++) {
+        DeviceState *cpudev = DEVICE(zynq_machine->cpu[n]);
+        sysbus_connect_irq(busdev, (2 * n) + 0,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+        sysbus_connect_irq(busdev, (2 * n) + 1,
+                           qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+    }
 
     for (n = 0; n < 64; n++) {
         pic[n] = qdev_get_gpio_in(dev, n);
@@ -350,7 +362,7 @@  static void zynq_init(MachineState *machine)
     zynq_binfo.board_setup_addr = BOARD_SETUP_ADDR;
     zynq_binfo.write_board_setup = zynq_write_board_setup;
 
-    arm_load_kernel(cpu, machine, &zynq_binfo);
+    arm_load_kernel(zynq_machine->cpu[0], machine, &zynq_binfo);
 }
 
 static void zynq_machine_class_init(ObjectClass *oc, void *data)
@@ -362,7 +374,7 @@  static void zynq_machine_class_init(ObjectClass *oc, void *data)
     MachineClass *mc = MACHINE_CLASS(oc);
     mc->desc = "Xilinx Zynq Platform Baseboard for Cortex-A9";
     mc->init = zynq_init;
-    mc->max_cpus = 1;
+    mc->max_cpus = ZYNQ_MAX_CPUS;
     mc->no_sdcard = 1;
     mc->ignore_memory_transaction_failures = true;
     mc->valid_cpu_types = valid_cpu_types;