diff mbox series

[09/21] target/m68k: Explicitly set 2-NaN propagation rule

Message ID 20241025141254.2141506-10-peter.maydell@linaro.org
State New
Headers show
Series softfloat: Set 2-NaN propagation rule in float_status, not at compile time | expand

Commit Message

Peter Maydell Oct. 25, 2024, 2:12 p.m. UTC 
Explicitly set the 2-NaN propagation rule on env->fp_status
and on the temporary fp_status that we use in frem (since
we pass that to a division operation function).
---
 target/m68k/cpu.c              | 16 ++++++++++++++++
 target/m68k/fpu_helper.c       |  1 +
 fpu/softfloat-specialize.c.inc | 19 +------------------
 3 files changed, 18 insertions(+), 18 deletions(-)

Comments

Philippe Mathieu-Daudé Oct. 26, 2024, 4:36 a.m. UTC | #1 
On 25/10/24 11:12, Peter Maydell wrote:
> Explicitly set the 2-NaN propagation rule on env->fp_status
> and on the temporary fp_status that we use in frem (since
> we pass that to a division operation function).
> ---
>   target/m68k/cpu.c              | 16 ++++++++++++++++
>   target/m68k/fpu_helper.c       |  1 +
>   fpu/softfloat-specialize.c.inc | 19 +------------------
>   3 files changed, 18 insertions(+), 18 deletions(-)

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Richard Henderson Oct. 28, 2024, 12:18 p.m. UTC | #2 
On 10/25/24 15:12, Peter Maydell wrote:
> Explicitly set the 2-NaN propagation rule on env->fp_status
> and on the temporary fp_status that we use in frem (since
> we pass that to a division operation function).
> ---
>   target/m68k/cpu.c              | 16 ++++++++++++++++
>   target/m68k/fpu_helper.c       |  1 +
>   fpu/softfloat-specialize.c.inc | 19 +------------------
>   3 files changed, 18 insertions(+), 18 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~
Peter Maydell Oct. 29, 2024, 10:10 a.m. UTC | #3 
On Fri, 25 Oct 2024 at 15:13, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> Explicitly set the 2-NaN propagation rule on env->fp_status
> and on the temporary fp_status that we use in frem (since
> we pass that to a division operation function).
> ---
>  target/m68k/cpu.c              | 16 ++++++++++++++++
>  target/m68k/fpu_helper.c       |  1 +
>  fpu/softfloat-specialize.c.inc | 19 +------------------
>  3 files changed, 18 insertions(+), 18 deletions(-)

Whoops, Laurent pointed out I forgot to add a signed-off-by
on this patch, so here it is:

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

-- PMM
diff mbox series

Patch

diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c
index 1d49f4cb238..5fe335558aa 100644
--- a/target/m68k/cpu.c
+++ b/target/m68k/cpu.c
@@ -93,6 +93,22 @@  static void m68k_cpu_reset_hold(Object *obj, ResetType type)
         env->fregs[i].d = nan;
     }
     cpu_m68k_set_fpcr(env, 0);
+    /*
+     * M68000 FAMILY PROGRAMMER'S REFERENCE MANUAL
+     * 3.4 FLOATING-POINT INSTRUCTION DETAILS
+     * If either operand, but not both operands, of an operation is a
+     * nonsignaling NaN, then that NaN is returned as the result. If both
+     * operands are nonsignaling NaNs, then the destination operand
+     * nonsignaling NaN is returned as the result.
+     * If either operand to an operation is a signaling NaN (SNaN), then the
+     * SNaN bit is set in the FPSR EXC byte. If the SNaN exception enable bit
+     * is set in the FPCR ENABLE byte, then the exception is taken and the
+     * destination is not modified. If the SNaN exception enable bit is not
+     * set, setting the SNaN bit in the operand to a one converts the SNaN to
+     * a nonsignaling NaN. The operation then continues as described in the
+     * preceding paragraph for nonsignaling NaNs.
+     */
+    set_float_2nan_prop_rule(float_2nan_prop_ab, &env->fp_status);
     env->fpsr = 0;
 
     /* TODO: We should set PC from the interrupt vector.  */
diff --git a/target/m68k/fpu_helper.c b/target/m68k/fpu_helper.c
index 8314791f504..a605162b71f 100644
--- a/target/m68k/fpu_helper.c
+++ b/target/m68k/fpu_helper.c
@@ -620,6 +620,7 @@  void HELPER(frem)(CPUM68KState *env, FPReg *res, FPReg *val0, FPReg *val1)
         int sign;
 
         /* Calculate quotient directly using round to nearest mode */
+        set_float_2nan_prop_rule(float_2nan_prop_ab, &fp_status);
         set_float_rounding_mode(float_round_nearest_even, &fp_status);
         set_floatx80_rounding_precision(
             get_floatx80_rounding_precision(&env->fp_status), &fp_status);
diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc
index 8e3124c11a6..226632a4d10 100644
--- a/fpu/softfloat-specialize.c.inc
+++ b/fpu/softfloat-specialize.c.inc
@@ -404,25 +404,8 @@  static int pickNaN(FloatClass a_cls, FloatClass b_cls,
     || defined(TARGET_RISCV) || defined(TARGET_SH4) \
     || defined(TARGET_TRICORE) || defined(TARGET_ARM) || defined(TARGET_MIPS) \
     || defined(TARGET_LOONGARCH64) || defined(TARGET_HPPA) \
-    || defined(TARGET_S390X) || defined(TARGET_PPC)
+    || defined(TARGET_S390X) || defined(TARGET_PPC) || defined(TARGET_M68K)
         g_assert_not_reached();
-#elif defined(TARGET_M68K)
-        /*
-         * M68000 FAMILY PROGRAMMER'S REFERENCE MANUAL
-         * 3.4 FLOATING-POINT INSTRUCTION DETAILS
-         * If either operand, but not both operands, of an operation is a
-         * nonsignaling NaN, then that NaN is returned as the result. If both
-         * operands are nonsignaling NaNs, then the destination operand
-         * nonsignaling NaN is returned as the result.
-         * If either operand to an operation is a signaling NaN (SNaN), then the
-         * SNaN bit is set in the FPSR EXC byte. If the SNaN exception enable bit
-         * is set in the FPCR ENABLE byte, then the exception is taken and the
-         * destination is not modified. If the SNaN exception enable bit is not
-         * set, setting the SNaN bit in the operand to a one converts the SNaN to
-         * a nonsignaling NaN. The operation then continues as described in the
-         * preceding paragraph for nonsignaling NaNs.
-         */
-        rule = float_2nan_prop_ab;
 #elif defined(TARGET_SPARC)
         /* Prefer SNaN over QNaN, order B then A. */
         rule = float_2nan_prop_s_ba;