diff mbox series

[5.11,051/775] arm64: dts: qcom: msm8916-samsung-a2015: Fix sensors

Message ID 20210301161204.242604854@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman March 1, 2021, 4:03 p.m. UTC 
From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 3716a583fe0bbe3babf4ce260064a7fa13d6d989 ]

When the BMC150 accelerometer/magnetometer was added to the device tree,
the sensors were working without specifying any regulator supplies,
likely because the regulators were on by default and then never turned off.

For some reason, this is no longer the case for pm8916_l17, which prevents
the sensors from working in some cases.

Now that the bmc150_accel/bmc150_magn drivers can enable necessary
regulators, declare the necessary regulator supplies to make the sensors
work again.

Fixes: 079f81acf10f ("arm64: dts: qcom: msm8916-samsung-a2015: Add accelerometer/magnetometer")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210111175358.97171-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index f91269492d729..f1af798abd749 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -106,6 +106,9 @@ 
 		interrupt-parent = <&msmgpio>;
 		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
 
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&accel_int_default>;
 	};
@@ -113,6 +116,9 @@ 
 	magnetometer@12 {
 		compatible = "bosch,bmc150_magn";
 		reg = <0x12>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
 	};
 };