diff mbox series

[5.11,140/210] net: phy: broadcom: Only advertise EEE for supported modes

Message ID 20210412084020.665670583@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman April 12, 2021, 8:40 a.m. UTC
From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit c056d480b40a68f2520ccc156c7fae672d69d57d ]

We should not be advertising EEE for modes that we do not support,
correct that oversight by looking at the PHY device supported linkmodes.

Fixes: 99cec8a4dda2 ("net: phy: broadcom: Allow enabling or disabling of EEE")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/bcm-phy-lib.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index 53282a6d5928..287cccf8f7f4 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -369,7 +369,7 @@  EXPORT_SYMBOL_GPL(bcm_phy_enable_apd);
 
 int bcm_phy_set_eee(struct phy_device *phydev, bool enable)
 {
-	int val;
+	int val, mask = 0;
 
 	/* Enable EEE at PHY level */
 	val = phy_read_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL);
@@ -388,10 +388,17 @@  int bcm_phy_set_eee(struct phy_device *phydev, bool enable)
 	if (val < 0)
 		return val;
 
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			      phydev->supported))
+		mask |= MDIO_EEE_1000T;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+			      phydev->supported))
+		mask |= MDIO_EEE_100TX;
+
 	if (enable)
-		val |= (MDIO_EEE_100TX | MDIO_EEE_1000T);
+		val |= mask;
 	else
-		val &= ~(MDIO_EEE_100TX | MDIO_EEE_1000T);
+		val &= ~mask;
 
 	phy_write_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV, (u32)val);