diff mbox series

[1/8] bus: mhi: core: Validate channel ID when processing command completions

Message ID 20210621161616.77524-2-manivannan.sadhasivam@linaro.org
State Superseded
Headers show
Series [1/8] bus: mhi: core: Validate channel ID when processing command completions | expand

Commit Message

Manivannan Sadhasivam June 21, 2021, 4:16 p.m. UTC
From: Bhaumik Bhatt <bbhatt@codeaurora.org>


MHI reads the channel ID from the event ring element sent by the
device which can be any value between 0 and 255. In order to
prevent any out of bound accesses, add a check against the maximum
number of channels supported by the controller and those channels
not configured yet so as to skip processing of that event ring
element.

Cc: stable@vger.kernel.org
Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>

Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>

Link: https://lore.kernel.org/r/1619481538-4435-1-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

---
 drivers/bus/mhi/core/main.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

-- 
2.25.1

Comments

Greg KH June 24, 2021, 1:50 p.m. UTC | #1
On Mon, Jun 21, 2021 at 09:46:09PM +0530, Manivannan Sadhasivam wrote:
> From: Bhaumik Bhatt <bbhatt@codeaurora.org>

> 

> MHI reads the channel ID from the event ring element sent by the

> device which can be any value between 0 and 255. In order to

> prevent any out of bound accesses, add a check against the maximum

> number of channels supported by the controller and those channels

> not configured yet so as to skip processing of that event ring

> element.

> 

> Cc: stable@vger.kernel.org

> Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")

> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>

> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>

> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>

> Link: https://lore.kernel.org/r/1619481538-4435-1-git-send-email-bbhatt@codeaurora.org

> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---

>  drivers/bus/mhi/core/main.c | 15 ++++++++++-----

>  1 file changed, 10 insertions(+), 5 deletions(-)

> 

> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c

> index 22acde118bc3..ed07421c4870 100644

> --- a/drivers/bus/mhi/core/main.c

> +++ b/drivers/bus/mhi/core/main.c

> @@ -773,11 +773,16 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,

>  	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);

>  

>  	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);

> -	mhi_chan = &mhi_cntrl->mhi_chan[chan];

> -	write_lock_bh(&mhi_chan->lock);

> -	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);

> -	complete(&mhi_chan->completion);

> -	write_unlock_bh(&mhi_chan->lock);

> +	WARN_ON(chan >= mhi_cntrl->max_chan);


What can ever trigger this WARN_ON()?  Do you mean to reboot a machine
if panic-on-warn is set?

If this can actually happen, then check for it and recover properly,
don't just blindly warn and then keep on going.

thanks,

greg k-h
Manivannan Sadhasivam June 24, 2021, 2:32 p.m. UTC | #2
On Thu, Jun 24, 2021 at 03:50:45PM +0200, Greg KH wrote:
> On Mon, Jun 21, 2021 at 09:46:09PM +0530, Manivannan Sadhasivam wrote:
> > From: Bhaumik Bhatt <bbhatt@codeaurora.org>
> > 
> > MHI reads the channel ID from the event ring element sent by the
> > device which can be any value between 0 and 255. In order to
> > prevent any out of bound accesses, add a check against the maximum
> > number of channels supported by the controller and those channels
> > not configured yet so as to skip processing of that event ring
> > element.
> > 
> > Cc: stable@vger.kernel.org
> > Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
> > Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> > Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
> > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
> > Link: https://lore.kernel.org/r/1619481538-4435-1-git-send-email-bbhatt@codeaurora.org
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  drivers/bus/mhi/core/main.c | 15 ++++++++++-----
> >  1 file changed, 10 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> > index 22acde118bc3..ed07421c4870 100644
> > --- a/drivers/bus/mhi/core/main.c
> > +++ b/drivers/bus/mhi/core/main.c
> > @@ -773,11 +773,16 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
> >  	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
> >  
> >  	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
> > -	mhi_chan = &mhi_cntrl->mhi_chan[chan];
> > -	write_lock_bh(&mhi_chan->lock);
> > -	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> > -	complete(&mhi_chan->completion);
> > -	write_unlock_bh(&mhi_chan->lock);
> > +	WARN_ON(chan >= mhi_cntrl->max_chan);
> 
> What can ever trigger this WARN_ON()?  Do you mean to reboot a machine
> if panic-on-warn is set?
> 
> If this can actually happen, then check for it and recover properly,
> don't just blindly warn and then keep on going.
> 

We can't do much here other than warning the user and dropping the
command.

There is no recovery possible because, the device has sent the command
completion event on a wrong channel. It can't happen usually unless a
malcious device sits on the other end.

Thanks,
Mani

> thanks,
> 
> greg k-h
Greg KH June 24, 2021, 2:39 p.m. UTC | #3
On Thu, Jun 24, 2021 at 08:02:48PM +0530, Manivannan Sadhasivam wrote:
> On Thu, Jun 24, 2021 at 03:50:45PM +0200, Greg KH wrote:
> > On Mon, Jun 21, 2021 at 09:46:09PM +0530, Manivannan Sadhasivam wrote:
> > > From: Bhaumik Bhatt <bbhatt@codeaurora.org>
> > > 
> > > MHI reads the channel ID from the event ring element sent by the
> > > device which can be any value between 0 and 255. In order to
> > > prevent any out of bound accesses, add a check against the maximum
> > > number of channels supported by the controller and those channels
> > > not configured yet so as to skip processing of that event ring
> > > element.
> > > 
> > > Cc: stable@vger.kernel.org
> > > Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
> > > Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> > > Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
> > > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
> > > Link: https://lore.kernel.org/r/1619481538-4435-1-git-send-email-bbhatt@codeaurora.org
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > ---
> > >  drivers/bus/mhi/core/main.c | 15 ++++++++++-----
> > >  1 file changed, 10 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> > > index 22acde118bc3..ed07421c4870 100644
> > > --- a/drivers/bus/mhi/core/main.c
> > > +++ b/drivers/bus/mhi/core/main.c
> > > @@ -773,11 +773,16 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
> > >  	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
> > >  
> > >  	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
> > > -	mhi_chan = &mhi_cntrl->mhi_chan[chan];
> > > -	write_lock_bh(&mhi_chan->lock);
> > > -	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> > > -	complete(&mhi_chan->completion);
> > > -	write_unlock_bh(&mhi_chan->lock);
> > > +	WARN_ON(chan >= mhi_cntrl->max_chan);
> > 
> > What can ever trigger this WARN_ON()?  Do you mean to reboot a machine
> > if panic-on-warn is set?
> > 
> > If this can actually happen, then check for it and recover properly,
> > don't just blindly warn and then keep on going.
> > 
> 
> We can't do much here other than warning the user and dropping the
> command.

But you didn't warn anyone.  Well, you rebooted the machine, is that ok?
If this can be triggered by a user, this should never happen.

Do not use WARN_ON() ever please.

> There is no recovery possible because, the device has sent the command
> completion event on a wrong channel. It can't happen usually unless a
> malcious device sits on the other end.

Then just eat the message and move on, please do not crash the box.

thanks,

gre k-h
Manivannan Sadhasivam June 24, 2021, 2:47 p.m. UTC | #4
On Thu, Jun 24, 2021 at 04:39:51PM +0200, Greg KH wrote:
> On Thu, Jun 24, 2021 at 08:02:48PM +0530, Manivannan Sadhasivam wrote:

> > On Thu, Jun 24, 2021 at 03:50:45PM +0200, Greg KH wrote:

> > > On Mon, Jun 21, 2021 at 09:46:09PM +0530, Manivannan Sadhasivam wrote:

> > > > From: Bhaumik Bhatt <bbhatt@codeaurora.org>

> > > > 

> > > > MHI reads the channel ID from the event ring element sent by the

> > > > device which can be any value between 0 and 255. In order to

> > > > prevent any out of bound accesses, add a check against the maximum

> > > > number of channels supported by the controller and those channels

> > > > not configured yet so as to skip processing of that event ring

> > > > element.

> > > > 

> > > > Cc: stable@vger.kernel.org

> > > > Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")

> > > > Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>

> > > > Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>

> > > > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> > > > Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>

> > > > Link: https://lore.kernel.org/r/1619481538-4435-1-git-send-email-bbhatt@codeaurora.org

> > > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> > > > ---

> > > >  drivers/bus/mhi/core/main.c | 15 ++++++++++-----

> > > >  1 file changed, 10 insertions(+), 5 deletions(-)

> > > > 

> > > > diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c

> > > > index 22acde118bc3..ed07421c4870 100644

> > > > --- a/drivers/bus/mhi/core/main.c

> > > > +++ b/drivers/bus/mhi/core/main.c

> > > > @@ -773,11 +773,16 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,

> > > >  	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);

> > > >  

> > > >  	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);

> > > > -	mhi_chan = &mhi_cntrl->mhi_chan[chan];

> > > > -	write_lock_bh(&mhi_chan->lock);

> > > > -	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);

> > > > -	complete(&mhi_chan->completion);

> > > > -	write_unlock_bh(&mhi_chan->lock);

> > > > +	WARN_ON(chan >= mhi_cntrl->max_chan);

> > > 

> > > What can ever trigger this WARN_ON()?  Do you mean to reboot a machine

> > > if panic-on-warn is set?

> > > 

> > > If this can actually happen, then check for it and recover properly,

> > > don't just blindly warn and then keep on going.

> > > 

> > 

> > We can't do much here other than warning the user and dropping the

> > command.

> 

> But you didn't warn anyone.  Well, you rebooted the machine, is that ok?

> If this can be triggered by a user, this should never happen.

> 

> Do not use WARN_ON() ever please.

> 

> > There is no recovery possible because, the device has sent the command

> > completion event on a wrong channel. It can't happen usually unless a

> > malcious device sits on the other end.

> 

> Then just eat the message and move on, please do not crash the box.

> 


Okay. We'll spit an error message and drop the event.

Thanks,
Mani

> thanks,

> 

> gre k-h
Greg KH June 24, 2021, 3:27 p.m. UTC | #5
On Thu, Jun 24, 2021 at 08:17:52PM +0530, Manivannan Sadhasivam wrote:
> On Thu, Jun 24, 2021 at 04:39:51PM +0200, Greg KH wrote:
> > On Thu, Jun 24, 2021 at 08:02:48PM +0530, Manivannan Sadhasivam wrote:
> > > On Thu, Jun 24, 2021 at 03:50:45PM +0200, Greg KH wrote:
> > > > On Mon, Jun 21, 2021 at 09:46:09PM +0530, Manivannan Sadhasivam wrote:
> > > > > From: Bhaumik Bhatt <bbhatt@codeaurora.org>
> > > > > 
> > > > > MHI reads the channel ID from the event ring element sent by the
> > > > > device which can be any value between 0 and 255. In order to
> > > > > prevent any out of bound accesses, add a check against the maximum
> > > > > number of channels supported by the controller and those channels
> > > > > not configured yet so as to skip processing of that event ring
> > > > > element.
> > > > > 
> > > > > Cc: stable@vger.kernel.org
> > > > > Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
> > > > > Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> > > > > Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
> > > > > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > > > Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
> > > > > Link: https://lore.kernel.org/r/1619481538-4435-1-git-send-email-bbhatt@codeaurora.org
> > > > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > > > ---
> > > > >  drivers/bus/mhi/core/main.c | 15 ++++++++++-----
> > > > >  1 file changed, 10 insertions(+), 5 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> > > > > index 22acde118bc3..ed07421c4870 100644
> > > > > --- a/drivers/bus/mhi/core/main.c
> > > > > +++ b/drivers/bus/mhi/core/main.c
> > > > > @@ -773,11 +773,16 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
> > > > >  	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
> > > > >  
> > > > >  	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
> > > > > -	mhi_chan = &mhi_cntrl->mhi_chan[chan];
> > > > > -	write_lock_bh(&mhi_chan->lock);
> > > > > -	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
> > > > > -	complete(&mhi_chan->completion);
> > > > > -	write_unlock_bh(&mhi_chan->lock);
> > > > > +	WARN_ON(chan >= mhi_cntrl->max_chan);
> > > > 
> > > > What can ever trigger this WARN_ON()?  Do you mean to reboot a machine
> > > > if panic-on-warn is set?
> > > > 
> > > > If this can actually happen, then check for it and recover properly,
> > > > don't just blindly warn and then keep on going.
> > > > 
> > > 
> > > We can't do much here other than warning the user and dropping the
> > > command.
> > 
> > But you didn't warn anyone.  Well, you rebooted the machine, is that ok?
> > If this can be triggered by a user, this should never happen.
> > 
> > Do not use WARN_ON() ever please.
> > 
> > > There is no recovery possible because, the device has sent the command
> > > completion event on a wrong channel. It can't happen usually unless a
> > > malcious device sits on the other end.
> > 
> > Then just eat the message and move on, please do not crash the box.
> > 
> 
> Okay. We'll spit an error message and drop the event.

If this can be triggered by a user, don't provide a way to DoS the
kernel error log.

thanks,

greg k-h
Manivannan Sadhasivam June 24, 2021, 3:56 p.m. UTC | #6
On Thu, Jun 24, 2021 at 05:27:17PM +0200, Greg KH wrote:
> On Thu, Jun 24, 2021 at 08:17:52PM +0530, Manivannan Sadhasivam wrote:

> > On Thu, Jun 24, 2021 at 04:39:51PM +0200, Greg KH wrote:

> > > On Thu, Jun 24, 2021 at 08:02:48PM +0530, Manivannan Sadhasivam wrote:

> > > > On Thu, Jun 24, 2021 at 03:50:45PM +0200, Greg KH wrote:

> > > > > On Mon, Jun 21, 2021 at 09:46:09PM +0530, Manivannan Sadhasivam wrote:

> > > > > > From: Bhaumik Bhatt <bbhatt@codeaurora.org>

> > > > > > 

> > > > > > MHI reads the channel ID from the event ring element sent by the

> > > > > > device which can be any value between 0 and 255. In order to

> > > > > > prevent any out of bound accesses, add a check against the maximum

> > > > > > number of channels supported by the controller and those channels

> > > > > > not configured yet so as to skip processing of that event ring

> > > > > > element.

> > > > > > 

> > > > > > Cc: stable@vger.kernel.org

> > > > > > Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")

> > > > > > Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>

> > > > > > Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>

> > > > > > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> > > > > > Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>

> > > > > > Link: https://lore.kernel.org/r/1619481538-4435-1-git-send-email-bbhatt@codeaurora.org

> > > > > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> > > > > > ---

> > > > > >  drivers/bus/mhi/core/main.c | 15 ++++++++++-----

> > > > > >  1 file changed, 10 insertions(+), 5 deletions(-)

> > > > > > 

> > > > > > diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c

> > > > > > index 22acde118bc3..ed07421c4870 100644

> > > > > > --- a/drivers/bus/mhi/core/main.c

> > > > > > +++ b/drivers/bus/mhi/core/main.c

> > > > > > @@ -773,11 +773,16 @@ static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,

> > > > > >  	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);

> > > > > >  

> > > > > >  	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);

> > > > > > -	mhi_chan = &mhi_cntrl->mhi_chan[chan];

> > > > > > -	write_lock_bh(&mhi_chan->lock);

> > > > > > -	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);

> > > > > > -	complete(&mhi_chan->completion);

> > > > > > -	write_unlock_bh(&mhi_chan->lock);

> > > > > > +	WARN_ON(chan >= mhi_cntrl->max_chan);

> > > > > 

> > > > > What can ever trigger this WARN_ON()?  Do you mean to reboot a machine

> > > > > if panic-on-warn is set?

> > > > > 

> > > > > If this can actually happen, then check for it and recover properly,

> > > > > don't just blindly warn and then keep on going.

> > > > > 

> > > > 

> > > > We can't do much here other than warning the user and dropping the

> > > > command.

> > > 

> > > But you didn't warn anyone.  Well, you rebooted the machine, is that ok?

> > > If this can be triggered by a user, this should never happen.

> > > 

> > > Do not use WARN_ON() ever please.

> > > 

> > > > There is no recovery possible because, the device has sent the command

> > > > completion event on a wrong channel. It can't happen usually unless a

> > > > malcious device sits on the other end.

> > > 

> > > Then just eat the message and move on, please do not crash the box.

> > > 

> > 

> > Okay. We'll spit an error message and drop the event.

> 

> If this can be triggered by a user, don't provide a way to DoS the

> kernel error log.

> 


The term "user" is a bit vague here. Only a malcious device sits on the PCIe
bus that claims a defined VID/PID can trigger this error. And we do need to tell
the user of the host machine that the device tried to do something wrong.

So I guess the error log is fine here?

Thanks,
Mani

> thanks,

> 

> greg k-h
diff mbox series

Patch

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index 22acde118bc3..ed07421c4870 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -773,11 +773,16 @@  static void mhi_process_cmd_completion(struct mhi_controller *mhi_cntrl,
 	cmd_pkt = mhi_to_virtual(mhi_ring, ptr);
 
 	chan = MHI_TRE_GET_CMD_CHID(cmd_pkt);
-	mhi_chan = &mhi_cntrl->mhi_chan[chan];
-	write_lock_bh(&mhi_chan->lock);
-	mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
-	complete(&mhi_chan->completion);
-	write_unlock_bh(&mhi_chan->lock);
+	WARN_ON(chan >= mhi_cntrl->max_chan);
+
+	if (chan < mhi_cntrl->max_chan &&
+	    mhi_cntrl->mhi_chan[chan].configured) {
+		mhi_chan = &mhi_cntrl->mhi_chan[chan];
+		write_lock_bh(&mhi_chan->lock);
+		mhi_chan->ccs = MHI_TRE_GET_EV_CODE(tre);
+		complete(&mhi_chan->completion);
+		write_unlock_bh(&mhi_chan->lock);
+	}
 
 	mhi_del_ring_element(mhi_cntrl, mhi_ring);
 }